Real Estate Integration

GrowthZone's Real Estate Edition provides features required by most National Association of REALTORs Associations for managing their real estate data. The features include an additional tab on contact records to store real estate data, data sync management, and other necessary resources. The software supports integration to NRDS, various MLS, and Lock-box solutions.

Upon installation of the software, you will work with your on-boarding project manager to configure the settings necessary to seamlessly integrate to the various solutions.

NRDS Integration

The GrowthZone integration with the National Association of REALTORS’ NRDS database provides association staff an easy way to manage their contacts’ NRDS data. Select data entered or changed in GrowthZone is automatically pushed to NRDS, thereby updating agent and office records in NRDS. Data is pushed every ten minutes to ensure your records in NRDS are always up to date.

	IMPORTANT Transfers are NOT done in GrowthZone. If a transfer is needed, this must be done in NRDS

NRDS Integration Initial Setup

Upon installation of the software, you will work with your on-boarding project manager to configure the settings necessary to seamlessly integrate to NRDS.

Link NRDS, MLS, Lockbox Status to Membership Status (COMING SOON)

Automatically deactivating or reactivating a member’s access to related real estate services (MLS, Lockbox, NRDS) based on their membership status with your association provides significant time savings for your staff. During initial configuration of your system you can set the rules to be applied to NRDS, MLS and Lockbox status, based on a change on an agent's membership status. When a membership is suspended, dropped, or reactivated, the system will reference these settings to adjust real estate service settings accordingly. NOTE: Prior to setting up this automation, you should have completed all integration setup for your MLS, Lock Box, and NRDS. Additionally, this step should be performed after your membership types have been created.

	See how it works!

Define Membership Status to NRDS, MLS, Lockbox Status Rules

To define your rules:

Click Setup in the left-hand navigation panel.
Click Membership Settings in the Membership section.
To set the rules for your membership types, click the Add button.
Select the Membership Type to which you wish to apply rules.
For each service, select the rule to be applied when the selected membership type is:
- Suspended
- Reactivated
- Terminated
Note: The choices available will be dependent on your service provider, and you do not have to set rules for all providers. In the example below, the REALTOR® membership will set the NRDS status to Inactive when the membership is dropped, Active when the membership is reactivated, and make no change when the membership is suspended. For all other services, there is no automated change.
Click Done.

Repeat the steps above for each membership type to which you wish to apply rules. NOTE: You do not need to perform this step for all membership types. If no rules are set for a membership type, no changes to NRDS, MLS or Lockbox status will automatically occur.

	Sentrilock: The Null status is currently not available for selection when setting up automation. If your association is not updating an individual's SentriLock card status, the card status should be left as No Change.

Change Membership Status to NRDS, MLS, Lockbox Status Rules

Click Setup in the left-hand navigation panel.
Click the icon in the Actions column.
Make the desired changes.
Click Done.

Edit Membership Status to NRDS, MLS, Lockbox Status Rules

Click Setup in the left-hand navigation panel.
Click the icon in the Actions column.
Click OK to confirm.

NRDS - Working with Offices

Although Offices are not "members" of the Realtor organization (the Realtor association is an individual member organization), the Office record must exist because each member must be linked to an office. This follows how licensure works in each state. Also, the office name, address, phone, etc is stored once in the office record so if an office changes the POE does not have to change that information in every agent record.

The POE for the Primary association of the Office can add or change an office for that association:

Add tells NRDS to Add the record. If NRDS finds an office record already exists with the same Office ID it will process the Add as a Change without the necessity of sending the record again. There is one exception to this rule: if the Office Name in the Add is different than the Office Name in the existing record then NRDS will reject the record and require that the record be sent as a Change rather than an Add.
Change tells NRDS to Change the record. If NRDS finds that an office record does not already exist by checking the Office ID it will process the Change as an Add without the necessity of sending another record.

Working with Primary Offices

Data sent to NRDS for a Primary Office

The fields described in the table below are synchronized to NRDS.

*Field Name*	*Description*	*Data format*	*Required*
*Initial Setup*
POE Association (read only)	This field will automatically fill in with Association’s Point of Entry ID. This i configured during initial setup of the association	9 Numeric
Association Id (read only)	The 4-digit local association ID where this office has primary membership. This is configured during initial setup of the association.	4 Numeric	X
*Profile Tab*
Name	Required. Business name of the office.	30 Alpha	X
*Real Estate Tab*
NRDS ID	The unique 9-digit NRDS ID assigned to this office location.	9 Numeric	X
Join Date	The date the office joined the association.	8 Date
NRDS Status	Required. Status of the office record: A Active I Inactive T Terminated	1 Alpha	X
StatusChangedDate	Date of the last status change.	8 Date
Non-member Salespersons	The number of non-member salespersons affiliated with this office. If the POE has verified there are no non member salespersons in this office, then a zero '0' must be sent.	5 Numeric	X
Office DR NRDS ID	The DR of this company, whether or not they are at this location. This must be a valid 9-digit member ID.	9 Numeric	X
Primary State	Required. The 4-digit State association ID where this office has primary membership.	4 Numeric	X
Office Corporate Name	Corporate name of the office, if different from the business name.	30 Alpha
Office Type	Used by association to track office type such as Residential, Commercial, Affiliate, etc.	4 Alpha
NRDS Physical Address - Street	Street name and address number of office.	30 Alpha	X
NRDS Physical Address - Attn/Care of	This is a second line of address to be used for additional address information (building number, etc.)	30 Alpha
NRDS Physical Address - City	Name of city.	21 Alpha	X
NRDS Physical Address -State	State abbreviation.	2 Alpha	X
NRDS Physical Address - Zip Code	The 5-digit US Postal zip code.	5 Alpha	X
NRDS Physical Address - Zip + 6	Standard 4-digit ZIP extension plus 2-digit carrier route.	6 Alpha
NRDS Mailing Address	The mailing address where mail should be sent, if different from Street Address.	30 Alpha
NRDS Mailing Address - Mail Attn/Care Of	Additional line for mailing address.	30 Alpha
NRDS Mailing Address - City	City for mailing address.	21 Alpha
NRDS Mailing Address - State	State abbreviation for mailing address.Main	2 Alpha
NRDS Mailing Address - Zip Code	5-digit zip code for mailing address.	5 Alpha
NRDS Mailing Address - Zip + 6	4-digit Zip extension plus 2-digit carrier route for mailing address.	6 Alpha
Phone Number - Office Area Code	3-digit area code for office’s phone number.	3 Numeric	X
Phone Number - Office Phone Number	7-digit phone number for the office. There is no need to type in the dash ( -) when entering numbers.	7 Numeric	X
Fax Number - Area Code	3-digit area code for office’s fax number.	3 Numeric
Fax Number - Number	7-digit fax number for the office. There is no need to type in the dash ( -) when entering numbers.	7 Numeric
Additional Phone Number	Phone Number for secondary phone for the office, if needed.	7 Numeric
Email Address	Email address for office.	80 Alpha
Website	Internet address for office’s web page, if any.	80 Alpha
Office DR NRDS ID	The Designated Realtor (DR) for this 0ffice, whether or not they are at this location. This must be a valid 9-digit NRDS ID. If the DR does not exist in NRDS, NAR recommends using the 9 digit NRDS for an association staff member to enter the office into the NRDS database. Once the office has been entered into NRDS you will be able to add the Agent, and update the DR NRDS ID for the office.	9 Numeric	X
RE: Office Manager NRDS ID	Required. This field is to track the contact person at this office location when it is not the same as the DR. When adding an Office, if this location's Office Contact Manager is the same as the Member entered for Office Contact DR, this field may be null. If Null, upon the Add, this field shall default to the same Member ID as was entered in Office Contact DR.	9 Numeric	X
Stop Mail	Indicates whether mail should be stopped to this address. .	1 Alpha
Stop Fax	Indicates whether the office wishes the fax number to be used.	1 Alpha
Stop Marketing Material	Indicates whether the office wishes to receive “junk” mail from mailing lists, etc.	1 Alpha
*Additional Information*
Franchise ID	This field is used to indicate the franchise, if any, with which this office is affiliated. Franchise ID must be a valid 9-digit Office NRDS ID in the NRDS database.	9 Numeric
Parent Company NRDS ID	This field is used if this office location is affiliated with a parent company. Parent ID must be a valid 9-digit Office NRDS ID in the NRDS database.	9 Numeric
District	Use reserved for association to track geographic or political districts.	4 Alpha
Tax ID	The taxpayer identification number for the business.	12 Alpha
Corporate License	The office’s corporate or business license.	12 Alpha
Main Office ID	If this office location is a branch office, use this field to enter the Main Office’s unique 9-digit ID. The main office must be a valid Office ID in the office database.	9 Numeric
Branch Type	Code to indicate if this location is: M Main office B Branch Office S Single office - no branch locations.	1 Alpha
Billing Office ID	Used to track the office ID of the billing office. This ID must be a valid 9-digit ID in the office database.	9 Numeric
Office Contact Unlicensed	Alpha field for 30 characters. Enter the office contact name if they are not a member.	30 Alpha
On Roster	Y if office should be on roster; N if they should not.	1 Alpha
MLS Online Status	Status of office’s access to MLS system.	1 Alpha
MLS Online Status Changed Date	Date of last MLS status change.	8 Date
MLS Office ID	MLS ID number for this office.	10 Alpha

Search NRDS Database for Offices

Prior to synchronizing any of your office data to NRDS, it is recommended that you search the NRDS database. By searching NRDS, you can verify whether the office already exists in the NRDS database and avoid duplication.To search the NRDS database:

For the desired office, click the Real Estate tab.
Click the Search NRDS/Add Office button.
Enter any of the fields to be used in searching NRDS. The more filters you can supply, the more efficient the search of NRDS will be.
Click Search NRDS. Any matching results will be displayed.

If the office is NOT is found, and you are the POE for the office, select Create New. See Add a Primary Office for further instructions
If the office is found, select the matching office. Review the information returned by NRDS to GrowthZone in the NRDS Information section:
- If the office is Active with another POE, enter the office as a Secondary. See Add a Secondary Office.
- If the office is Inactive, you will not be able to sync with NRDS. You must access the NRDS database and update the record accordingly.

	NOTE: The Search NRDS/Add Office button is only displayed when a NRDS ID has not been assigned to the office.

NRDS - Add a Primary Office

Adding an office with NRDS is performed on the Real Estate tab. Offices are not members of NAR, but need to exist in the NRDS database. Prior to adding a new office to NRDS, search the NRDS database as described in Search NRDS Database for Office.

	NOTE: If NRDS finds an office record already exists with the same Office ID it will process the Add as a Change without the necessity of sending the record again. There is one exception to this rule: if the Office Name in the Add is different than the Office Name in the existing record then NRDS will reject the record, and return an error. You will need to update the office name in NRDS OR change the name in GrowthZone to match the NRDS record.

For the desired office, click the Real Estate tab.
Click the Search NRDS/Add Office button. By searching NRDS, you can verify whether the office already exists in the NRDS database and avoid duplication. Adding a brand new office, assumes that no matching records are found. Search NRDS Database for Office.
Click the Create New radio button.
Tick Sync to NRDS sync.
Click the Get NRDS Number button. The next NRDS available will be assigned to the office. NOTE: If Tie Account Number To NRDS Number the account number for this office will be automatically updated with the NRDS ID.
Complete the following fields, an asterisk denotes a required field. If the field is not populated the sync of this record to NRDS will fail. See Data Sent to NRDS for a Primary Office for a detailed description of each field.
- Active Since*: The date this office joined NRDS.
- NRDS Status*: Select the appropriate status for this office. For a new office, to be activated in NRDS, select Active.
- Non-Member Salespersons*: NM is Non-member licensees who work in this Realtor office but choose not to join the association. NOTE: Because it is a required field, if this office does not have any NM Salespersons, you must enter a zero in this field.
- Office DR NRDS ID*: Enter the NRDS ID of the The Designated REALTOR (DR) for this office. This must be a valid 9-digit member ID. The DR must exist in NRDS. See note below.
- Office Manager NRDS ID: This field is to track the contact person at this office location when it is not the same as the DR. If this location's Office Contact Manager is the same as the Member entered for Office Contact DR, this field may be left empty.
- Primary State: Select the state where this office has primary membership.
- Local Join Date: The date this office joined your association.
- Office Formal Name: This field can be used to enter the full name of the Office, up to 60 characters. Because the Office Business Name is limited to 30 characters due to mailing restrictions, use this field to fully describe the office name for your own use.
- Office Type: This field can be used to track office type such as Residential, Commercial, Affiliate, etc.
Communication Options:
- Stop Mail: Tick the radio button to exclude the office from from mailings, including the Realtor Magazine.
- Stop Fax: Tick the radio button if the office does not wish the fax number to be used.
- Stop Marketing Material: Tick the radio button to stop any marketing materials from being sent to this office.
- Physical Address: Select the physical address to be used for this office. Addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another address.
- Mailing Address (if different than Physical Address): Select a mailing address if needed. Addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another address.
- Email Address: Select an email address for the office. Email addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another email address.
- Phone Number: Select a phone number for the office. Phone Numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another phone number.
- Additional Phone Number: Select an additional phone number for the office. Phone Numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another phone number.
- Fax Number: Select a fax number for the office. Fax numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another fax number.
Click Done.

The new office will be synched to NRDS within 15 minutes, no additional interaction is required on your part. Additional information for the office can be added under the Additional Information section on the Real Estate tab. See NRDS - Add Office Additional Information for further details.

	IMPORTANT! NRDS requires that the Office DR NRDS ID be sent when you are adding a new office. This requires that the DR exist in the NRDS database as an Agent. However, when adding a new office AND a new agent to NRDS, the agent's NRDS record will not be present yet. So it will reject the office and the agent update. NRDS recommends the following process for handling this situation: Add the office using the NRDS ID of one of your staff members as the Office DR NRDS ID. Add the agent that will become the DR for the office, and sync to NRDS. After both the office and the agent have been added to NRDS you will then be able to update the Office DR NRDS ID in GrowthZone and this change will be sent to NRDS.

NRDS - Add Office Additional Information

Additional information may be tracked for a NRDS office through your GrowthZone software, and synched to NRDS. This information is NOT required.

For the desired office, click the Real Estate tab.
Click the icon in the Additional Information section.
Enter the following:
- Parent Company NRDS ID: Used if this office location is affiliated with a parent company. Parent ID must be a valid 9-digit Office ID in NRDS database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
- District: This is used for associations to track geographic or political districts.
- Main Office ID: If this office location is a branch office, use this field to enter the Main Office’s unique 9-digit NRDS ID. The main office must be a valid Office ID in the NRDS Database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
- Branch: This field is used to identify the branch type. Select from: Branch Office, Main Office, Single Office.
- Billing Office ID: Use this field to track the office ID of the billing office. This ID must be a valid 9-digit NRDS ID in the NRDS database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
- Office Contact Unlicensed: If the office is un-licensed, enter the office contact name if they are not a member.
- On Roster: Select Yes if office should be on roster; No if they should not.
- Franchise ID: Use to indicate the franchise, if any, with which this office is affiliated. Franchise ID must be a valid 9-digit NRDS Office ID in the NRDS database.
- Office Corporate Name: Corporate name of the office, if different from the business name.
- Tax ID: The taxpayer identification number for the business.
- Corporate License: The office’s corporate or business license.
- MLS Online Status Changed Date: This is a read only field, that indicates when the MLS On-line Status was updated.
- MLS Online Status: Date of last MLS status change.
- MLS Office ID: The MLS ID number for this office.
Click Done.

NRDS - Change a Primary Office Record

Any changes to the NRDS data listed in Data sent to NRDS for a Primary Office will automatically be sent to NRDS as long as Enable Sync to NRDS is checked on the Real Estate tab for the office. All data fields are sent not just those that have changed.

	NOTE: If NRDS finds that an office record does not already exist by checking the Office ID it will process the Change as an Add without the necessity of sending another record.

NRDS - Update Primary Office NRDS Status

Click the Real Estate tab.
Click the icon in the NRDS Office Information section.
Select the appropriate status from the Status list.
Click Done.

	IMPORTANT: When dropping, if there are active memberships on the office and individuals, drop the individuals first and then proceed to the office as NRDS will not accept an office drop if there are agents related to the office that are still activ.

NRDS - Working with Secondary Offices

The secondary office settings allow you to track secondary relationships of offices. For example, if your association is not the POE for an office, but they have a membership with you, you will track this as a secondary record. A limited amount of information is sent to NRDS for a secondary record. As described in Data Sent to NRDS for Secondary Office record.

Data Sent to NRDS for Secondary Office record

The table below describes the data sent to NRDS for a supplemental record.

*Field Name*	*Description*	*Data format*	*Required*
*Initial Setup*
Association Id (read only)	The 4-digit local association ID assigned to the association itself. This is configured during initial setup of the accociation	4 Numeric	X
*Real Estate Tab*
NRDS ID	The unique 9-digit NRDS ID assigned to this office location.	9 Numeric	X
NRDS Status	Required. Use this field to indicate the Status of the Secondary record.	1 Alpha	X
Status Changed Date	Enter the date you changed the status of this Supplemental record	8 Date
Non-member Salespersons	The number of non-member salespersons affiliated with this office. If the POE has verified there are no non member salespersons in this office, then a zero '0' must be sent.	5 Numeric	X

NRDS - Add a Secondary Office

The primary association field, in NRDS, indicates which association first added this office. If your association also needs to be associated with this office because you have members linked there, you can add these with via your GrowthZone software, and the supplemental data will be synchronized to NRDS.

	IMPORTANT: You can only add an Office Secondary record if the Office itself exists on NRDS and is Active. Perform a search of the NRDS database to confirm that the record exists. If the office does not exist or is Inactive, NRDS will reject the transaction. Be sure to review the Event Log for errors.

For the desired office, click the Real Estate tab.
Search NRDS as described in Search NRDS Database for Offices to ensure that the record exists. Select the matched office. A limited amount of NRDS data will be returned by NRDS to GrowthZone. NOTE: The status of the office will be returned by NRDS. If the status is NOT active, you will not be able to sync a secondary record to NRDS. Changes to the status of the office will need to be performed within NRDS prior to being able to sync the secondary record.
Click the icon in the Secondary Office section.
Click Sync to NRDS.
Populate the following fields. An asterisk indicates a required field (NOTE: Status Changed Date will automatically be populated).
- Status*: Select Active from the drop-down list.
- NM Salesperson Count*: Use the field in this table to report the number of non-member salespersons in this office that the broker will pay for through his Secondary association.
Click Done. The Done button will not be enabled if any of the required fields are missing.

The new secondary office record will immediately be sent to the NRDS processing queue. All data described in Data Sent to NRDS for Supplemental Office will be sent, no further action on your part is required.

Change a Secondary Office Record

The CHANGE will process the changes sent for an existing office supplemental. You cannot change the OfficeID/AssociationID. You would need to inactivate the record and add a new one. Only the POE who added the office supplemental record can change it. When Sync With NRDS is checked, on the Real Estate tab, any changes made to the fields listed Data Sent to NRDS for Secondary Office will trigger a change transaction. All fields will be sent, not just those that you have changed.

On the Office Real Estate tab, click the icon in the Secondary Office section.
Ensure Sync to NRDS is enabled.
Make desired changes.
Click Done. The changes to the supplemental office will immediately be sent to the NRDS processing queue, no further action is required. NOTE: The Done button will not be enabled if any of the required fields are missing.

Change NRDS Status of a Secondary Office

To change the status of a secondary office:

On the Office Real Estate tab, click the icon in the Secondary Office section.
Ensure Sync to NRDS is enabled.
Select the desired status from the Status list.
Click Save. The changes to the supplemental office will immediately be sent to the NRDS processing queue, no further action is required. NOTE: The Save button will not be enabled if any of the required fields are missing.

	NOTE: All fields listed in Data Sent to NRDS for Secondary Office Record will be sent to NRDS.

Working with Primary Agents

The Agent record in NRDS is the "foundation" of the association. If you are the POE, via GrowthZone you can add and change your primary agent data in NRDS. The ADD will add a new member record in NRDS. A POE can add a member only for an Association ID for which they are the POE. The CHANGE will process the changes sent for an existing member. You cannot change a member that is inactive (Status I or T). Only the POE for the primary association can change a member. Only the POE for the Primary association of the agent can Add an agent to that association or change the agent record.

Agent Data sent to NRDS (Primary)

The table below describes the data that is sent to NRDS for a Primary Agent.

Field Name	Description	Data format	Required
*Initial Setup*
POE Association (Read only)	The Association’s Point of Entry ID. This is configured on initial setup of the GrowthZone database and will be read only on the Real Estate tab. This ID will automatically populate on the Real Estate tab as read only.	9 Numeric	X
Association ID	The 4-digit local association for this member’s primary affiliation. This is configured upon initial setp of the GrowthZone database, and will be displayed - read only - on the Real Estate tab.	4 Numeric	X
*Profile Tab*
First Name	Required. Member’s first name.	12 Alpha	X
Middle	Member’s middle name.	12 Alpha
Last Name	Required. Member’s last name, up to 30 characters.	30 Alpha	X
Suffix	Family generation and other suffixed - e.g. Jr. Sr. III Esq. Note: do not enter designations here. There is a separate field for those.	3 Alpha
Common Name	Member’s nickname	12 Alpha
Prefix	Formal title which precedes member’s name Mr. Ms. Mrs. etc,	4 Alpha
Gender	Male/Female	1 Alpha
Address 1	Street name and address number of member’s address. Type of address is assigned on the Real Estate tab.	30 Alpha	X
Address 2 (see above)	This is a second line of address to be used for additional address information (building number, etc.). Type of address is assigned on the Real Estate tab.	30 Alpha
City (see above)	Name of city for the address. Type of address is assigned on the Real Estate tab.	21 Alpha	X
State (see above)	State abbreviation. Type of address is assigned on the Real Estate tab.	2 Alpha	X
Postal Code (see above)	The 5-digit US Postal zip code. Type of address is assigned on the Real Estate tab.	5 Alpha	X
Postal Code +4 (see above)	Standard 4-digit ZIP extension plus 2-digit carrier route. Type of address is assigned on the Real Estate tab.	6 Alpha
Address 1	The mailing address where mail should be sent, if different from Home Address, marked as Mailing Address on the Real Estate tab.	30 Alpha
PR: Address 2 (see above)	Additional line for mailing address. Type of address is assigned on the Real Estate tab.	30 Alpha
City (see above)	City for mailing address. Type of address is assigned on the Real Estate tab.	21 Alpha
State (see above)	State abbreviation for mailing address. Type of address is assigned on the Real Estate tab.	2 Alpha
Postal code (see above)	5-digit zip code for mailing address. Type of address is assigned on the Real Estate tab.	5 Alpha
Postal code +4 (see above)	4-digit Zip extension plus 2-digit carrier route for mailing address. Type of address is assigned on the Real Estate tab.	6 Alpha
*Real Estate Tab*
NRDS ID	The unique, 9-digit NRDS ID for this member. Once this field it populated, it is greyed out and read only.	9 Numeric	X
Member Type	The membership type of this agent	Drop-down list	X
Active Since	The date the member joined NRDS	8 Date	X
Local Join Date	The date this agent joined the association.
Status	Member status See NRDS Documentation for further explanation on how/when these are used.	Drop-down list	X
Status Changed Date	The date of last status change.	Date format
Primary State	The State association where this member has primary membership.	Drop-down list	X
License	Required if Member Type is R or RA. Member’s real estate license number. This must match the format set by the state associations.	11 Alpha	X
RE: Primary Field of Business	Indicates member’s primary field of business.	Drop-down list	X
Office NRDS ID	The unique 9-digit NRDS ID for this member's Office. This ID must be valid in the NRDS database.	9 Numeric	X
*Real Estate Tab - Communications*
Stop Mail	Indicates whether or not to exclude active members from mailings, including the Realtor Magazine. NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Fax	Indicates if fax number is usable for fax mailings. NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Marketing Material	Indicates whether the member wishes to receive marketing materials. If checked, the member is removed from NAR's Direct Mail mailing list. NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Email	Indicates whether the member wishes to receive emails. NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Preferred Mail	Indicates where the member would prefer to receive mail.	Drop-down list	X
Preferred Publication	Where the member prefers to receive their publication(s)	Drop-down list	X
Preferred Phone	Member’s preferred phone:	Drop-down list	X
Preferred Fax	Where the member prefers to receive faxes	Drop-down list
Home Address	The address to be used as the member''s home address. Choices available in the list are configured on the Profile tab.	Drop-down list	X
Mailing Address	The address to be used as the member's mailing address if different than the home address. Choices available are configured on the Profile tab.	Drop-down list	X
Cell	3-digit area code + 7-digit number of the member’s cell phone number. Choices available in the list are configured on the Profile tab.	3 Numeric
Home Phone	3-digit area code + 7 digit phone number for Member’s home phone number. There is no need to type in the dash ( -) when entering numbers. Choices available in the list are configured on the Profile tab.	10 Numeric
Cell	3-digit area code + 7-digit number of the member’s cell phone number. Choices available in the list are configured on the Profile tab.	10 Numeric
Fax Number	3-digit area code + 7 digit number for member’s personal fax number. Choices available in the list are configured on the Profile tab.	10 Numeric
Website	Internet address for member’s web page, if any.	80 Alpha
Email	Required if Member Type is R or RA. Email address for member. Choices available in the list are configured on the Profile tab.	80 Alpha	X
*Additional Information*
Waive Local Dues	Indicates if local dues should be waived for the member (Y/N).	Check to indicate Y
Waive State Dues	Indicates if state dues should be waived for the member (Y/N).	Check to indicate Y
Waive NAR Dues	Indicates if National dues should be waived for the member (Y/N).	Check to indicate Y
NAR Dues Paid	Date field in MMDDYYYY format for association to indicate NAR dues were paid.	8 Date
State Dues Paid	Date field in MMDDYYYY format for association to indicate State dues were paid. These two fields (NAR and State) are mainly used by associations for look-ups when processing transfers.	8 Date
Secondary Fields of Business	Numeric code that indicates member’s secondary field of business.	3 Numeric
Secondary Fields of Business	Numeric code that indicates member’s secondary field of business.	3 Numeric
Member Subclass	Used by States and Boards to exchange additional billing types for members.	Drop-down list
Member Birthdate	Member’s date of birth.	8 Date
Orientation Date	The date the member completed the association’s orientation.	8 Date
On Roster	Indicates if member wishes to appear on roster (Y/N).	1 Alpha
Previous Non Member	Indicates if the member changed their status with the association from a non-member to a member. Valid choices are Y or N	Check to indicate Y
Arbitration Ethics Pending	Flag indicating if arbitration or ethics investigation or proceedings are pending against this member.	Check to indicate Y
Reinstatement Code	Code used to indicate if member has been reinstated.	Check to indicate Y
Reinstatement Date	Date member was reinstated.	8 Date
On Roster	Indicates if member wishes to appear on roster (Y/N).	Check to indicate Y
Previous Non Member	Indicates if the member changed their status with the association from a non-member to a member. Valid choices are Y or N	1 Alpha
Occupation Name	Member’s occupation. This is used for reporting RPAC contributions on various state and federal election reports.	20 Alpha
Member Salutation	Member’s name as it appears after Dear in the greeting of a mail merge letter.	24 Alpha
MLS ID	Member’s MLS ID number.	9 Alpha
MLS Online Status	Status of member’s online MLS access.	1 Alpha
MLS Status Changed Date (read only)	Date of last online MLS status change.	8 Date
MLS Association ID	The 4-digit association ID of the member’s primary regional MLS.	4 Numeric

Search NRDS Database for an Agent

Best practice when working with your agents is to first search the NRDS database to verify whether a record exists for the agent. By searching the database, you ensure that there is no duplication of records. Additionally, by searching NRDS you can determine if the member is active in NRDS at another Association and they will need to add in their Association as the secondary.

For the desired agent, click the Real Estate tab.
Click the Search NRDS/Add Member button.
Enter search criteria. Adding more information to your search criteria can help increase the accuracy and speed of the search results that will display. You may search on any combination of fields with the exception of the First Name only, Member Office State only, and RE License only.
Click Search NRDS. If results are found, they will be displayed on screen.

If this is a new agent (has not had a NAR membership previously), and you are the POE, no matching agent should be found. Click the Create New button to add the new agent to the NRDS database. See Add an Agent (Primary).
If a matching agent is found in NRDS, and you are not the POE enter this agent as a secondary record. See Add an Agent - Secondary.
If a matching agent is found in NRDS, but is inactive. Do NOT sync the agent with NRDS. You will need to go to the NRDS database and setup the agent appropriately.

	NOTE: When you select a match from the search results, the following information is returned: NRDS ID First Name Middle Name Last Name Generation Member Type Member Status MLS Association ID (Regional MLS if any) Office ID Office Name Office City Office State Office Zip Primary Local Assoc ID Primary State Assoc ID

Add an Agent (Primary)

If you are the POE for an agent, you can add them to your database, and sync the record to NRDS.

Search the NRDS Database as described above. If no match is found, click the Create New radio button.
Click Sync to NRDS.
Click the Get NRDS Number button to generate a NRDS ID for this agent. Once a NRDS ID is generated and assigned to this agent, it cannot be changed. NOTE: The Account Number for the agent will automatically be updated to the NRDS ID if Tie Account Number To NRDS Number was enabled during the initial setup of your GrowthZone database.
In the NRDS section, populate the following fields. All data entered will be sent to NRDS, however, only those marked with an asterisk are required (See Agent Data sent to NRDS for detailed descriptions and formatting of the fields.):
- Member Type*: Select this agent's member type from the list. NOTE: If the member type is R or RA you must also populate the license for this agent on the Profile tab.
- Active Since: Indicates the date that this agent joined NRDS.
- Local Join Date: The date the member transferred or reinstated into this current Primary association. NOTE: The field Join Date should not change when members move from association to association. Use this field to indicate that move. This cannot be a future date.
- Status*: Select Active from the list.
- POE Association: This field will automatically be populated with the POE Association ID for your organization.
- License: Choose the license associated to this agent, or click the icon to add a new license.
- Primary State*: Select the state where this member has primary membership.
- Primary Field of Business*: Select the agent's primary field of business. NRDS approved fields of business are displayed in the list.
- NRDS Office*: Select this agent's office from the list. All offices associated to this agent will be displayed for selection. NOTE: The office must exist in NRDS database.
In the Communications section, complete the following (an asterisk indicates a required field)
- Stop Mail: Indicates whether or not to exclude active members from mailings, including the Realtor Magazine. Check the box to exclude the agent.
- Stop Fax: Indicates whether the agent wants the fax number to be used. Check this box to indicate that the fax should not be used.
- Stop Email: This setting indicates whether the agent wishes to be on NAR's Direct Mail mailing list. Only an agent can change this field in their record. Anything a POE sends in this field will be ignored by NRDS.
- Stop Marketing Material: This setting indicates whether the agent wants to receive marketing materials from NRDS. Only an agent can change this. Anything the POE send in this field will be ignored by NRDS.
- Preferred Mail: Select the address type to which the agent prefers to have mail sent. Required if agent is R or RA.
- Preferred Publication: Select the address type to which the agent prefers to have publications sent. Required if agent is R or RA.
- Preferred Phone Number: Select the phone number type the agent prefers to be used for phone calls.Required if agent is R or RA.
- Preferred Fax Number: Select the fax number to which the agent prefers to receive faxes.
- Home Address: Select the agent's home address. All addresses you have added on the Profile tab are available for selection OR click the icon to add an address. NOTE: If the agent type is R or RA, this field is required.
- Mailing Address: If the mailing address is different than Home Address, select the mailing address. All addresses you have added on the Profile tab are available for selection OR click the icon to add an address.
- Cell: Select the agent's cell-phone number. All phone numbers you have added on the Profile tab are available for selection OR click the icon to add a phone number.
- Home Phone: Select the agent's home phone number. All phone numbers you have added on the Profile tab are available for selection OR click the icon to add a phone number.
- Email: Select the primary email for this agent. All emails you have added on the Profile tab are available for selection OR click the icon to add an email. NOTE: If the Agent is R or RA the email address is required.
- Preferred Fax: Select the fax number the agent prefers to be used. All fax numbers you have added on the Profile tab are available for selection OR click the icon to add a fax number.
- Website: Select the agent's web-site. All web-sites you have added on the Profile tab are available for selection OR click the icon to add a web-site url.
Click Done.

The new agent will be synched to NRDS within 10 minutes, no further interaction is required on your part.

	NOTE: When adding an agent, if NRDS finds a member record already exists with the same Member ID or License it will process the Add as a Change without the necessity of sending another record. There are two exceptions to this rule: if the Name in the add is different than the Name in the existing record, if the License in the add is different from the License in the existing record. Then NRDS will reject the record and require that the record be sent as a Change rather than an Add. Review the Event Log to ensure that there were no validation errors.

Add Agent (Primary) Additional Information

Additional information about your agents can be tracked in GrowthZone. This information is not required, but if populated will be synchronized to NRDS. NOTE: Only the POE can add/update additional agent information.

For the desired agent, click the Real Estate tab.
Click the in the NRDS Additional Information section. NOTE: If you are NOT the POE for this agent, you are not authorized to add/change the additional information and the will not be available.
Enter the desired information. See Agent Data sent to NRDS (Primary) for detailed descriptions of the fields.
Click Done. The updates will be sent to NRDS automatically with no further interaction on your part.

Change/Update an Agent (Primary)

If you are the POE for an agent you can change/update profile and NRDS information via GrowthZone. When Sync With NRDS is enabled on the Real Estate tab, changes to any of the fields described in Agent Data sent to NRDS (Primary) will trigger a synch to NRDS. All fields are sent, not just those that have been changed.

	NOTE: NRDS will not process a change on an inactive member (Status of Inactive, Terminated or Deceased). If you want to change the agent’s record you must first change the member back to active or provisional within the NRDS database.

Change an Agent's NRDS Status (Primary)

An agent's status can be updated within GrowthZone, and synchronized to NRDS. Agent statuses include:

Active
Inactive indicates that the member left voluntarily, in good standing. They may have decided not to renew their membership or may have simply resigned or retired from the business.
Terminate indicates that the member was dropped because they did not meet an outstanding duty or obligation. This includes an unfulfilled code of ethics violation, hearing, outstanding arbitration obligation or not taking the COE course. In other words, this member did not leave in good standing. Choosing to simply not renew their membership would not fit in this category.
Suspend was added to NRDS for the specific purpose of tracking members who had not taken their COE course by December 31 of each quadrennial. If a member does not take the COE course by December 31, 2012 the association must suspend that member, and by March 1 must terminate the member if they have not taken the course. Therefore there should be no members with status S in NRDS after March 1.
Provisional status is available for associations who have adopted the Provisional bylaw. It allows you to enter a member into NRDS with a Member Type of REALTOR®/REALTOR® Associate and a Status of Provisional even before they have met all the requirements for orientation, etc. NAR will provide all services to these members (magazines, realtor.org, etc.) as they are considered REALTORS®/REALTOR® Associates with all rights and privileges.

Any update to the agent's status will trigger a CHANGE transaction to NRDS. To update an agent's NRDS status:

Select the agent's Real Estate tab.
Click the in the NRDS Information section. NOTE: If you are NOT the POE for this agent, you are not authorized to change this information and the will not be available.
Ensure that Sync With NRDS check-box is selected.
Select the desired Status from the list.
Click Done.

Once you have saved, a change transaction is triggered. All fields described in Agent Data sent to NRDS (Primary) will be sent to NRDS within ten minutes, no additional interaction is required on your part.

Secondary Agent Records

The Agent Secondary record is used to store supplemental, or secondary records for a member. A member is in NRDS only once with one NRDS ID but you can link many secondary records to one member. The secondary record is used to indicate a member’s secondary associations, secondary offices, secondary licenses, etc. The Secondary record allows you to define additional relationships this agent may have to other offices, within an office, or other associations. There is no limit on the number of supplemental records attached to a member. Best practice when adding a secondary record, if the secondary record in NOT a secondary record for an agent for which you are POE, is to search NRDS to bring back data from NRDS for the record.

Data Sent to NRDS for Secondary Agent Records

The information below is sent to NRDS for secondary records. During synchronization All information is sent, but note the fields that are required. The data you enter will be dependent on the type of secondary record you are sending.

Field Name	Description	Data format	Required
Real Estate Tab
NRDS ID	The member's unique 9-digit NRDS ID. The member must exist in NRDS and be an active member in order to add a secondary record.	9 Numeric	X
Office ID	Required. The Supplemental record is used to indicate any other Offices where a member works in addition to the ‘core’ Office in the Member record. If you are using this Supplemental record to indicate a member’s Secondary association, additional License, etc. and the Office is still the same as the one in their core Member record, select the same office id from the list. If you are using this Supplemental record to indicate another Office where this member is affiliated, enter the other office ID. All offices to which the agent is associated in your GrowthZone database will be available for selection.	9 Numeric	X
Type	Required. Use this Supplemental record to indicate that the member has a different Member Type (usually in another Office or another Association). If you are using this Supplemental record to indicate Secondary associations, secondary offices, etc. and the Member Type is still the same as in the member’s core Member record, enter the same Member Type here.	4 Alpha	X
License	The Secondary record can be used to indicate that the member has a different License Number (usually in another Office or another Association). You will be able to select a license from the list, or add a new license on the fly.	Drop-down Choice
Status	Required. Use this field to indicate the Status of the Secondary record. For example, you set up a supplemental record to indicate the member worked at another Office. When that is no longer true, you would set the Status of this record to I (Inactive). Again, this Status relates ONLY to this particular secondary record	1 Alpha	X
Member Subclass	Used in conjunction with Member Type by many associations. Again, you would use this in the same manner as Member Type to indicate supplemental information.	4 Alpha
Local Join Date	If using this record to add on a Secondary Association to the member, enter the date that the member joined this secondary association.	8 Date
Billing Discount	Used in conjunction with the Realtor Electronic Commerce Network - Dues Billing module. The EC Invoice allows an association to set up a discount applicable to members of a certain group. For this supplemental record attached to this member at this association, enter Y if the member is in that special discount group.	1 Alpha

Add a Secondary Agent Record

The approach used to add a secondary record will depend on whether the agent currently exists in your GrowthZone database, with a valid NRDS ID.

The agent already has a NRDS ID in your database:

On the agent's Real Estate tab, click the icon in the Secondary Member(s) section.
Click Sync to NRDS.
Enter the NRDS information. The fields indicated by an asterisk are required for a secondary (supplemental) record. See Data Sent to NRDS for Secondary Records for further information about these fields.
- NRDS Status*: Use this field to indicate the Status of the Supplemental Record.
- Office NRDS ID*: Select the Office NRDS ID, from the list, for the agent's secondary record. All offices to which this agent is associated will be displayed for selection.
- Status: Select the desired member status, for this agent as it applies to the secondary record.
- Member Type: Select the desired member type, as it applies to the secondary record.
- Member Subclass: Select the desired member subclass.
- Local Join Date: This field can be used to indicate when this agent joined this secondary association, office, etc.
- Billing Discount: Indicate by Yes or No whether this secondary qualifies for a billing discount.
Click Done. No further interaction is required on your part. The secondary record will be synced to NRDS automatically. All information described in Data Sent to NRDS for Secondary Records will be sent.

The agent does NOT have a NRDS ID in your GrowthZone database

On the agent's Real Estate tab, search NRDS for the agent as described above.
Click the matched contact. NOTE: If you are NOT the POE for this agent, and no match is found, you will NOT be able to add this secondary record to NRDS. You will need to determine why the agent is not already associated to his/her primary association within NRDS before you can proceed.
Click the icon in the Secondary Members section.
- Click Sync to NRDS.
Enter the NRDS information. The fields indicated by an asterisk are required for a secondary (supplemental) record. See Data Sent to NRDS for Secondary Records for further information about these fields.
- NRDS Status*: Use this field to indicate the Status of the Supplemental Record.
- Office NRDS ID*: Select the Office NRDS ID, from the list, for the agent's secondary record. All offices to which this agent is associated will be displayed for selection.
- Status: Select the desired member status, for this agent as it applies to the secondary record.
- Member Type: Select the desired member type, as it applies to the secondary record.
- Member Subclass: Select the desired member subclass.
- Local Join Date: This field can be used to indicate when this agent joined this secondary association, office, etc.
- Billing Discount: Indicate by Yes or No whether this secondary qualifies for a billing discount.
Click Done. No further interaction is required on your part. The secondary record will be synced to NRDS automatically. All information described in Data Sent to NRDS for Secondary Records will be sent.

Add Additional Secondary Agent Record(s)

You may add as many additional secondary records as needed.

On the agent's Real Estate tab, click the icon in the Secondary Member(s) section.
Ensure that Sync to NRDS is selected.
Click the icon.
Populate the desired fields.
Click Done.

The additional secondary record will be sent to NRDS with no further action needed. All information described in Data Sent to NRDS for Secondary Records will be sent.

Update a Secondary Agent Record

For the desired agent, click the Real Estate tab.
Click the icon in the Secondary Member(s) section.
Make the desired updates.
Click Done

The changes to the secondary record will be sent to NRDS with no further action needed. All information described in Data Sent to NRDS for Secondary Records will be sent.

NRDS Education Records

Every 4 years, in a set cycle, every Realtor and Realtor Associate must take the NAR Code of Ethics course. This Education record can be added by any POE. They do not have to have a primary or secondary relationship with the member. Because members could take an education course at any association, this is the one record that can be added by any POE to any member. GrowthZone currently provides the ability to track agent's Code of Ethics (COE) training. Synchronization of the education records is made to NRDS within 10 minutes of the addition or update of the records.

Data sent to NRDS for Code of Ethics

The table below describes the Code of Ethics fields that are sent to NRDS.

Field Name	Description	Format	Required
NRDS ID	The 9-digit unique member ID of the member. Note: The Member must be active (A or P) or Suspended (S).	9 Numeric	X
*Education Course Code*	Unique course code assigned by the sponsoring or licensing association. Once the Group Code has been selected, use this field to enter the specific course code. COE Course: For the Code of Ethics course, this should always be COEC. If the POE is entering a new member orientation COE course, it should be COEN	Drop-down choice	X
*Education Course Number*	Assigned by the sponsoring or licensing Association. COE Course: If this is for a COE course, it should always be the year followed by the cycle. If the course was in 2012 for Cycle 3, it should be 2012C3. If the course was in 2013 for Cycle 4, it should be 2013C4, etc. Several POE reports reply on the Course Number following these standards so always be sure to use this format for the COE course. NOTE: if entering the course for new members, using the year as the Course Number is acceptable.	15 Alpha	X
*Ethics Training Date*	Date course was completed. For one day courses, use this field for the course date. COE Course: For the COE course, this should be the date they completed the course.	8 Date	X

Add/Update Code of Ethics Training

	NOTE: The agent must have an NRDS ID and Sync to NRDS must be enabled. NRDS will not allow you to add an Education record for a member who is not active (or Suspended) in NRDS (Status A, P or S).

For the desired agent, click the Realtor's tab.
Click the icon, in the Code of Ethics section.
Click Sync to NRDS.
Enter the following information (an asterisk denotes a required field):
- Training Date
- Education Course Code*
- Education Course Number*
- COE Year
Click Done.

Your additions/updates to Code of Ethics training will be sent to NRDS within 10 minutes, with no additional interaction on your part.

Review NRDS Event Log

Issues identified during synchronization with NRDS may be visible in the event log.

Click Setup in the left-hand navigation panel.
Click Event Log in the Miscellaneous section.
Click Customize Results.
Select NRDS Event from the Log Type list.
Click Done.

To view details of an event, click the icon.

The table below describes some of the common errors that may be logged in the Event Log.

CODE		MESSAGE TEXT	MESSAGE DESCRIPTION
3510	ERROR-CODE:3510:[%S] required when [%S] entered: ([%S]) [%S]		[%S] represents the field name. You are only sending part of a phone number, and the other part doesn’t exist in NRDS.
3521	ERROR-CODE:3521:Invalid state passed in for Street State value =: [%S]		The two-character state code must match one of the states or territories recognized in the US.
3525	ERROR-CODE:3525:[%S] length is greater than maximum length [%S] allowed.		This error will display if you are sending a field that is greater than the maximum allowed. Refer to fields sent to NRDS for correct formatting of the field.
3530	ERROR-CODE:3530:Invalid Number passed for [%S] value= [%S]		What you are passing is not a number or is not a valid value for the field (negative, etc.).
3535	ERROR-CODE:3535:Invalid date/time passed for [%S] value = [%S]		Invalid date/time passed for <Date/Time Field Name> value = <Date/Time Field Value>
3540	ERROR-CODE:3540:[%S] has invalid values. Value = [%S], Valid Values are [%S]		[%S] represents the field name. Refer to fields sent to NRDS for correct formatting of the field.
3555	ERROR-CODE:3555:[%S] is a Required field.		[%S] represents the field name. You have failed to send a required field.
3585	ERROR-CODE:3585:The record has changed since your last request. Please get the most recent record.		The record has changed since your last request. You must include the most recent Timestamp for that record which you can get from NRDS via a Query Refresh.
3590	ERROR-CODE:3590:System application error, please contact NRDS Helpline.		This usually refers to an invalid value either in the record in NRDS, or being passed as part of the transaction. See note.
3595	ERROR-CODE:3595:Invalid criteria provided <Data Field>		Invalid criteria provided <Data Field>
3774	ERROR-CODE:3774:Invalid Search Criteria: Association Name must be at least three characters		Invalid Search Criteria: Association Name must be at least three characters in a query.
3776	ERROR-CODE:3776:Invalid Search Criteria: Office Name must be at least three characters		Invalid Search Criteria: Office Name must be at least three characters in a query.
3777	ERROR-CODE:3777:Invalid Search Criteria: First Name and/or Last Name total length must be at least three characters		Invalid Search Criteria: First Name and/or Last Name total length must be at least three characters in a query.
3782	ERROR-CODE:3782:More than 100 matching records were found. Please search again and narrow your search criteria.		More than 100 matching records were found. Please search again and narrow your search criteria.
3785	ERROR-CODE:3785:No records found with your Search criteria		No records found with your Search criteria
3791	ERROR-CODE:3791:Invalid search criteria. Please search on the correct fields		Invalid search criteria. Please search on the correct fields
3797	ERROR-CODE:3797:[%S][%S] Does not exist in the NRDS System		[%S] represents the field name. <Member or Assoc><ID> Does not exist in the NRDS System
3868	ERROR-CODE:3868:The record has changed since your last request. Please get the current record.		The record has changed since your last request. Please get the current record.
3660	ERROR-CODE:3660:[%S] Cannot process CHANGE as TRANSFER. Primary Association mismatch. Primary Association in NRDS is [%S]		This occurs when you are trying to change a record's Primary Association ID. You must use Transfer in that case, not Change.
3500	ERROR-CODE:3500:[%S] [%S] is in the future.		[%S] represents the field name. The ONLY date that may be in the future is Orientation Date in the member record.
3505	ERROR-CODE:3505:[%S] is not a valid email address		Email addresses are assumed to follow the format of name@domain.topleveldomain
3511	ERROR-CODE:3511:Invalid phone number passed in for [%S] Phone Number value =: [%S]		Phone numbers must be numeric and conform to the 7-digit US phone number standard.
3512	ERROR-CODE:3512:Invalid area code passed in for [%S] Area Code value =: [%S]		Area codes passed must be numeric and conform to the 3-digit US area code standard.
3705	ERROR-CODE:3705:Sender ID [%S] is not the POE for Association [%S]		You are attempting to change or add a record for which you are not the POE. This means the value in the primary association ID field does not match any association for which you are the POE.
3740	ERROR-CODE:3740:Sender [%S] is not Primary POE for the Association [%S]		You are attempting to change or add a record for which you are not the POE. This means the value in the primary association ID field does not match any association for which you are the POE.

NAR E-Commerce

GrowthZone provides integration with NAR E-Commerce. Through this integration you can:

Easily handle splits of membership dues. You will have the ability to indicate distribution parameters and NAR will send along those amounts to state and national appropriately.
Store cards in the back office for future use and allow your members to store cards via the Info Hub.
Setup autopay for recurring purchases on stored cards.
Process refunds through the GrowthZone backoffice
Handle declined charges and receive notification of card processing failures.

NAR E-Commerce Initial Setup

The setup of the E-Commerce payment processing account in the GrowthZone software will be done by GrowthZone. The following pieces of information will be needed for setup:

Association ID
User ID
Password
Credit cards that you accept.

NAR E-Commerce Initial Setup - Dues Split

If you wish to setup dues splits, goods/services will need to be created for each share of a membership’s dues. For example, you will need a fee item called something like “Membership Dues - NAR” to account for the amount of the membership that should be sent to National. GrowthZone will assist you in the initial setup of Good/Services and in configuring the appropriate dues split.

General Setup/Process:

Setup good/services for local, state, and national.
Configure which good/services on a membership type go to state, national, association.
When a payment is processed, distribution parameters are sent to NAR E-Commerce.

IMPORTANT

GrowthZone only supports splits at the time of payment. You are unable to use E-Commerce to process monthly membership payments and then send a lump sum annually to state and national.
E-Commerce will support up to 6 destination bank accounts, if just one account is being used, the splits will not need to be configured.
GrowthZone supports creating refunds for memberships that include splits. However, the refund will auto-debit ALL of the refunded amount from the local association. This is because NAR does not support auto-debiting other associations; it will be up to the local association to contact the others (e.g. State and Nat’l) to recoup those funds. Questions/Concerns should be directed to NAR.
GrowthZone does not charge additional transaction fees on top of NAR’s fees. For questions about rates and fees, please contact NAR.
There are many specific rules & regulations for E-Commerce. Please contact NAR with questions.

	NOTE: If changes are required after initial setup of the splits, contact gzsuppport@growthzone.com

NAR E-Commerce Storing Credit Cards

Credit cards to be used by your members can be stored from the back-office, or by your members in the Info Hub.

NAR E-Commerce Storing Credit Cards from Back Office

For the desired member, click the Billing tab.
Click the in the Stored Payment Profiles section.
Select the Payment Profile Type from the list.
Select your NAR E-Commerce Payment Gateway from the list.
Card Information:
- Select Yes/No for Do you have a NRDS ID. If Yes is selected, the NRDS information for the member will be automatically populated.
- Select the Card Type.
- Enter required card information details.
Click Done.

NAR E-Commerce Storing Credit Cards from Info Hub

In the Info Hub, click My Info.
Click the Billing tab.
Click the + icon in the Payment Profiles section.
Card Information:
- Select Yes/No for Do you have a NRDS ID. If Yes is selected, the NRDS information for the member will be automatically populated.
- Select the Card Type.
- Enter required card information details.
Click Done.

NAR E-Commerce Assign Store Card to Recurring Fees

If you or your member has stored a credit card, and you wish to assign the card to the members recurring fees, see Apply Store Cards to Recurring Fees. When generating your invoices for upcoming billing, the member's card will be automatically charged. See Manage Invoices for Upcoming Billing.

NAR E-Commerce Processing Refunds

If needed, you can easily process refunds from your GrowthZone software. See Refund a Payment.

	IMPORTANT: Contractually, the E-commerce network will not allow one association to automatically debit the bank account of another association. For example, the ABC Local Association cannot initiate an E-Commerce transaction that is going to debit the bank account of the XYZ State Association, or the National Association. So if the original transaction sent by the local association was used to distribute dues payments among the local, state and national, the local association using this request can only debit their own bank accounts. NAR E-Commerce provides the following best practice: The original Purchase totaled $350. The distribution was $84 to National, $70 to state, and $196 to local. The local association (the original Association ID in the Purchase) could use this transaction to refund the member’s credit card the $350 total. The total will all come out of the local association’s bank. We recommend that the local contact their state and national association first to see if those two entities will agree to this refund. If they agree, then the state and national could then send an EFT transfer for the original net amount they received to the local’s bank account who could then use this transaction to refund the member’s credit card in total from the local association’s bank account. This is one way to credit the member’s credit card in whole rather than crediting the member’s credit card for just the local amount and then the local writes the member a check once the local receives the state and national dues back from those two entities.

View NAR E-Commerce Payments

The Payment Processing Report can be used to view payments over a selected date range. See Payment Processing Report.

IMPORTANT: The Payment Processing Report will provide you with the grand totals of your payments processed through NAR Ecommerce. You will need to use the statement received from NAR Ecommerce to find the fees for those charges, and update your accounting software appropriately.

MLS Integration

GrowthZone offers a data integration with various MLS Solutions. This is a push-type integration which sends changes to contact information from GrowthZone to MRED’s MLS vendor, DynaConnections. The sync happens (when there are contact info changes) around 4 times hourly between the hours of 8 am (CST) and 8pm (CST), seven days a week. The purpose of the integration to an MLS is to establish an account for the member, to establish the member's access level within the MLS (defined by the agent's Member Type, and to track the member's status.

Currently, GrowthZone integrates to MRED and Corelogic. Black Knight coming soon.

MRED Integration

MRED Integration - Initial Setup

On initial installation of your software, GrowthZone will configure the initial connection to MRED. You will then be able to manage your agent's participation in MLS from the agent's Real Estate tab. GrowthZone will sync to MRED any additions or changes made to the MLS information on this tab. Records are synchronized every hour. MRED Office and Agent Files created, are zipped into one file and sent every hour to the FTP site.

Initial setup involves providing the FTP URL, Path, User Name and Password. This information is provided by MRED.

Initial Setup Considerations:

You have the option to enable Use Membership To Determine MLS Status. Selecting this option will automate updates to MLS status. For example, if you drop an agent, who has an active MLS status, the status will automatically be updated to Inactive. Important: this is designed to work when your members have only one membership.
You will decide if you wish to use the MLS ID Generator. If you select this option, a "Get MLS ID" button is available to you when assigning your MLS ID's. Enabling this option will prevent duplication of IDs.

MRED - Working with Agents

Via GrowthZone, you can add and update agent MRED information.

Data sent to MRED for an Agent

The table below described the data that is sent to MRED for agents. All data is sent, not just data that has changed.

Field Name	Description	Format	Required
*Initial Setup*
MLS Board Number	The 3 – 4 abbreviation for the association	4 Alpha	X
*Profile Tab*
Last Name	The agent’s last name	50 Alpha-numeric	X
First Name	The agent’s first name	50 Alpha-numeric	X
Middle Initial	The agent’s middle name or initial	50 Alpha-numeric
Suffix	The agent’s suffix, referred to as generation in MRED	50 Alpha-numeric
Common Name	The agent’s nick-name	50 Alpha-numeric
Title	The agent’s title	50 Alpha-numeric
Home Street Number	The street number for the address marked as home	50 Alpha-numeric
Home Street Name	The street name for the address marked as home	100 Alpha-numeric
Home City	The street city for the address marked as home	50 Alpha-numeric
Home State	The state for the address marked as home	2 Alpha-numeric
Home Zip Code	The zip code for the address marked as home	10 Numeric
Home Zip + 6	The zip code + 6 for the address marked as home	6 Numeric
Home Phone	The agent’s phone – marked as home. NOTE: You cannot have a phone without an area code or it will be rejected from MLS.	16 Alpha-numeric
Fax Number	The agent’s fax number	16 Alpha-numeric
Cell Phone	The agent’s cell phone	16 Numeric
Web-site	The web-site, marked as primary, for this agent	50 Alpha-numeric
Email	The default email listed for this agent	80 Alpha-numeric
License	The first license number listed in the Professional Section on the Profile tab.	50 Alpha-numeric
*Real Estate Tab*
NRDS ID	The Agent’s unique 9 digit NRDS ID	9 Numeric
MLS Office ID	The MLS ID for this agent's office. New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance.	25 Alpha-numeric	X
MLS Status	This agent’s MLS Status	Drop-down list	X
MLS ID	The MLS ID for this agent. '''NOTE''': New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance. Once the MLS ID is created in GrowthZone, it cannot be changed.	25 Alpha-numeric	X
Agent Type	The agent type drives the permissions the agent will have within the MLS.	Drop-down list

Add an Agent to MRED

	IMPORTANT!: If creating new agents AND a new office, the office must be created first and then the agents assigned to the office.

For the desired agent, verify that all contact information required to sync an agent to MRED has been populated on the Profile tab. See Data sent to MRED for an Agent for details.
Select the agent's Real Estate tab.
Click the icon in the MLS - MRED section.
Enter the agent's MLS ID. New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance. NOTE: If you have elected to enable MLS ID Generator during initial setup, a Get MLS ID button is displayed. Click the button to automatically create your MLS ID.
Click Done. IMPORTANT: Once the MLS ID is saved, it cannot be changed. Ensure that the number is correct prior to clicking Done.
Click the icon in the MLS Information section.
Enter the following information (an asterisk indicates a required field):
- MLS Office ID*: Enter the MLS ID for this agent's office.
- MLS Join Date: Enter the date this agent became active with MRED.
- MLS Status*: Select Active from the drop-down list. NOTE: By default, the MLS Status is NOT tied to the agent's GrowthZone membership status. If, during initial setup of the integration to MRED you have enabled Use Membership To Determine MLS Status, a change to the GrowthZone membership status will update the MLS status.
- Agent Type*: Select the appropriate agent type for this agent. The agent type drives the security role giving/restricting access the agent will have within the MLS. Agent Type is sometimes referred to as "class" .
- Term Date: Applicable when de-activating a member.
Click Done.

Change MRED Agent Data

Select the agent's Real Estate tab.
Click the icon in the MLS Information section.
Make desired changes to the agent data.
Click Done.

Change MRED Agent Status

Select the agent's Real Estate tab.
Click the icon in the MLS Information section.
Ensure that Sync with MLS is enabled.
Select the desired status from the MLS Status list.
(Optional) If you are inactivating an agent, enter the Term Date.
Click Save.

	NOTE: From MRED's point of view, there is no functional difference between Inactive, Terminated, Suspended; the member is denied access.

MRED - Working with Offices

Data sent to MRED for an Office

The table below describes the data that is sent to MRED for an office. Ensure that all fields are formatted appropriately, and required fields are populated.

Field Name	Description	Format	Required
Profile Tab
Name	Office Business Name	50 Alpha	X
Address 1	Street Number (20 max) and street name (100 max) for the first address that is marked as mailing or physical and mailing. Must include a street number	120 Alpha	X
Address 2 (see above)	Office Address Line 2	100 Alpha
City (see above)	Street City	50 Alpha	X
State (see above)	Street State	2 Alpha	X
Postal Code (see above)	5 digit Street ZIP	10 Num	X
Postal Code (see above)	Street ZIP+6	6 Num
Phone number	Office Phone Number. NOTE: You cannot have a phone without an area code or it will be rejected from MLS	16 Alpha
Email Address	Office E-Mail Address	80 Alpha
Real Estate Tab
NRDS ID	The office’s 9 digit unique NRDS ID	9 Numeric
MLS ID	Office Tax ID. This is NEVER the same as a NRDS ID	20 Alpha
MLS Status	The office’s MLS status	Drop-down list	X
Office License Number	This is the license number for the office from the State.
MLS Join Date	The date the office began with the MLS	8 Date
MLS Term Date	Date of termination of agent/office with MLS provider	8 Date

MRED - Add an Office

Click the office Real Estate tab.
Click the icon in the MLS - MRED section.
Enter the MLS ID for this office. IMPORTANT: Once you click Done you will not be able to edit the ID.
Click Done.
Click the icon in the MLS Information section.
Click Sync with MLS.
Complete the following information, an asterisk indicates a required field. Refer to for details descriptions of the fields:
- MLS Office ID*: The MLS ID for this office.
- MLS Status*: Select Active from the list.
- Join Date: Enter the date this office joined MRED.
- Office License Number: Enter the license number, issued by the state, for this office.
- Broker Reciprocity: Enable this check-box if the office participated in broker reciprocity.
Click Done.

The information listed in Data sent to MRED for an Office will automatically be sent to MRED, with no further interaction on your part.

MRED - Change Office Data

For the desired office, click the Real Estate tab.
Click the icon in the MLS Information section.
Ensure that Sync with MLS is selected.
Make the desired changes.
Click Done.

When data for an office is changed, all data listed in Data sent to MRED for an Office is sent to MRED, not just the changed data. A record will be rejected if any of the required fields are missing or data is malformed.

MRED - Change Office MLS Status

When an office is inactive, suspended or terminated, you can update the information in GrowthZone and this will be synched to MRED.

	IMPORTANT: If, during initial setup of MRED integration, you have enabled Use Membership To Determine MLS Status, the status of an office will automatically update to inactive when a member is dropped and vice versa.

For the desired office, click the Real Estate tab.
Click the icon in the MLS Information section.
Ensure that Sync with MLS is selected.
Select the desired MLS Status. NOTE: From MRED's point of view, there is no functional difference between Inactive, Terminated, Suspended; the office is denied access.
Click Done.

The changes will automatically be sent to MRED. All data listed in Data sent to MRED for an Office is sent to MRED, not just the changed data. A record will be rejected if any of the required fields are missing or data is malformed.

Corelogic Matrix Integration

CoreLogic's Matrix MLS is an MLS system that is a leader in this space. With GrowthZone integration you will be able to setup new agents in the MLS as well as manage the agent's security access to the system. Upon initial installation of the system custom fields will be created for agent and office security levels.

Corelogic Matrix Integration - Initial Setup

GrowthZone's team will configure the initial integration to CoreLogic Matrix.

Considerations:

You can elect to use a member's status as the MLS status. For example: If this option is selected, and you drop a member, the MLS status will automatically be updated to Inactive. NOTE: This only functions when a member has one and only one membership.
You must define the security access levels provided to your agents/offices. These should be the same security permission sets that you have setup within CoreLogic.

Corelogic Matrix - Working with Agents

Corelogic Matrix - Add an Agent

For the desired agent, ensure that all required contact information has been populated on the Profile tab. Refer to Data sent to Matrix for Agents for details.
Click the agent's Real Estate tab.
Ensure that an NRDS ID exists for this agent.
Click Sync With MLS.
Populate the following information. An asterisk denotes a required field. Refer to Data sent to Matrix for detailed descriptions.
- MLS Office ID: This is the ID that the OFFICE for this agent is known by publicly
- MLS ID: The MLS ID for this agent.
- MLS Join Date: The date this agent joined the MLS.
- MLS Status: Select this agent's status.
- MLS Password:
- MUC: Select this agent's security level
Click Save.

The new agent will synchronized to Matrix with no further interaction on your part.

Corelogic Matrix - Update an Agent

Basic contact information is stored by Corelogic Matrix. If any changes are made to the data sent to Matrix is changed in GrowthZone, and Sync with MLS is enabled on the Real Estate tab, these changes will be automatically sent to Matrix with no interaction on your part. Changes to any of the data listed in Data sent to Matrix for Agents will trigger a change to be sent to Corelogic.

Corelogic Matrix - Change an Agent's status

For the desired agent, click the Real Estate tab.
Select the desired status from the MLS Status list.
Click Save.

The change will be sent to Corelogic Matrix automatically, no further interaction is needed. NOTE: All information described in Data sent to Matrix for Agents is sent, not just what was changed.

Corelogic Matrix - Change an Agent's Security Level

For the desired agent, click the Real Estate tab.
Select the desired security level from the MUC list.
Click Save.

The change will be sent to Corelogic Matrix automatically, no further interaction is needed. NOTE: All information described in Data sent to Matrix for Agents is sent, not just what was changed.

Data sent to Corelogic Matrix for Agents

The table below describes the information that is sent to Corelogic Matrix for Agents.

Field Name	Description	Format	Required
Profile Tab
*Prefix*	The agent’s prefix
*Suffix*	The agent’s suffix
*First Name*	The agent’s first name	50 Alpha	X
*Prefix*	The agent’s prefix
*Last Name*	The agent’s last name	50 Alpha	X
*Middle*	The agent’s middle name	50 Alpha
*Common Name*	The agent’s nickname
*First Name + Middle + Last Name*	The agent’s display name	150 Alpha
*Address 1*	The agent’s Address 1 (the first record marked as Home)	50 Alpha Numeric
*Address 2*	The agent’s Address 2 (the first record marked as Home)	50 Alpha Numeric
*City*	The city for the agent’s address (the first record marked as Home)	50 Alpha
*Postal Code*	Postal code for the agent’s address (first record marked as Home)	10 Alpha Numeric
*Postal Code +4 (Home)*	The A ZIP + 4 code uses the basic five-digit code plus an additional four digits	14 Alpha Numeric
*Fax*	Agent’s fax number	16 Alpha Numeric
*Phone (Home)*	Agent’s phone. First one marked as home	16 Alpha Numeric
*Phone (Cell)*	Agent’s phone marked as cell	16 Alpha Numeric
*Phone (Default)*	Agent’s phone marked as default	16 Alpha Numeric
*Email (primary/default)*	Agent’s email marked as primary/default	80 Alpha Numeric
*License*	Agent’s real estate license number. The first license entered into the Professional section on the Profile tab	50 Alpha Numeric
*Licensing Authority*	The state the agent’s license is with	2 Alpha
*Real Estate Tab*
*NRDS ID*	The agent’s NRDS ID	25 Numeric
*MLS Password*	The agent’s MLS password
*MUC*	MUC defines the Member MLS Security Class (security) level for this agent. The options available for selection are defined during initial setup of the software.	Drop-down choice	X
*MLS Office ID*	This is the ID that the OFFICE for this is known by publicly	25 Alpha Numeric	X
*MLS Status*	The agent’s MLS Status: Active Inactive Suspended Terminated	Drop-down choice	X

Corelogic Matrix - Working with Offices

Corelogic Matrix - Add an Office

For the desired office, select the Real Estate tab.
Click Sync With MLS.
Enter the following information (an asterisk denotes a required field):
- MLS Office ID*
- MLS ID*
- Office License Number
- MLS Join Date
- MLS Status*
- Office Broker MLS ID
- Office Manager MLS ID: You may add multiple office managers by clicking the orange + sign.
- IDX Office Participation: Check this box to indicate that this office participates in IDX. IDX is the system that allows REALTORS® to show MLS property listings on their websites.
Click Save.

The added office will be sent to Corelogic Matrix automatically when the record is saved, no further interaction is required on your part.

Corelogic Matrix - Change an Office

If Sync with MLS is enabled for the office, a change to any of the information listed in Data Sent to Corelogic For Offices will automatically be sent to Corelogic Matrix.

Corelogic Matrix - Inactivate an Office

For the desired office, select the Real Estate tab.
Ensure that Sync With MLS is enabled.
Select Inactive from the Status list.
Click Save.

The status of the office will automatically be sent to Corelogic Matrix with no further interaction on your part.

	IMPORTANT: If, during the initial configuration of your MLS, you have elected to Use Membership To Determine MLS Status, dropping the membership will automatically update the status of the membership to Inactive. This option will only work "as expected" if just one membership is assigned to the office.

Black Knight - Paragon MLS (Coming Soon)

Black Knight's Paragon system is a nationwide MLS portal. By integration with GrowthZone additions and updates of agents and offices are seamlessly sent to Black Knight. GrowthZone will send a zipped file to Black Knight every hour.

Black Knight - Paragon Initial Setup(Coming Soon)

GrowthZone will assist you with the initial setup and integration to Black Knight. Following are considerations:

Have you populated all the necessary Primary User Boards?
Have you populated all Organization Types?

Black Knight - Paragon Synchronization Timing

Hourly a file with additions and changes are sent to Paragon's FTP site.

Black Knight Paragon - Working with Offices (Coming Soon)

Black Knight - Paragon Activate an Office (Coming Soon)

Follow the steps to add an Office described in
Click the Real Estate tab for the office.
Click the icon in the MLS - Black Knight section.
Enter the MLS ID for this office.
Click Done. IMPORTANT: ensure that the MLS ID is accurate, you will NOT be able to change this after clicking done.
Click the icon in the MLS Information section.
Click Sync with MLS.
REQUIRED: Select the office Status = Yes
REQUIRED: Select the Office Type from the list. Office types available are those that you configured during initial setup.
Enter the MLS Office ID.
Enter the MLS Office Broker ID.
Indicate whether this office should be included on rosters and mailing lists.
Click Done.

The record will be synced to Paragon within the hour with no further interaction on your part. All data described in Black Knight Paragon - Data Sent for Offices will be sent.

Black Knight - Paragon Update an Office record

Changes made to the data listed in Data Sent to Paragon for Office Records will automatically be sent to Paragon. All data described in Black Knight Paragon - Data Sent for Offices will be sent, not just what you have changed.

Black Knight - Paragon Inactivate an Office

For the desired office, click the Real Estate tab.
Ensure Sync with MLS is selected.
Change the Status to No.
Click Done.

The record will be synced to Paragon within the hour with no further interaction on your part. All data described in Black Knight Paragon - Data Sent for Offices will be sent.

Black Knight Paragon - Data Sent for Offices

The table below describes the data that is sent to Paragon for offices.

*Field*	*Description*	*Data format*	*Required*
*Profile Tab*
Name	The office name	100	X
Address 1	Default Address 1 for this office	30	X
Address 2	Default Address 2 for this office	30
City	Default Address City for this office	21	X
State	Default Address State for this office. Standard State Abbreviations	2	X
Postal Code	Default Address Zip/Postal Code for this office	20	X
Mailing Address 1	Mailing Address 1	50
Mailing Address 2	Mailing Address 2	50
City	Mailing Address City	50
State	Mailing Address State. Standard State Abbreviations	2
Postal Code	Mailing Address Zip/Postal Code	20
Phone (Default)	The office default phone number	10
Phone (Fax)	The office fax	10
Phone (Other)	The office phone (other)	10
Email	The office email	50
Web Address	The web address for this office, the first one marked as social	80
Real Estate Tab
Office Type	The office organization type. Your association will customize the list of types during initial setup.	Drop-down choice	X
MLS ID	The office MLS ID	10	X
Status	Status of this office in MLS.	Y or N	X
NRDS ID	The 9 digit NRDS ID for this office	9
Office Broker MLS ID	This is the MLS Id for the Office Broker	25
MLS Office ID	Null if this is the main office; If this is a Branch then this would be the Main office MLS ID; Null if this is a standalone office.	25
Member of Board	Indicates whether this office is member of board	Y/N or Null
Include in Mailing Lists	Indicates whether this office should be included in mailing lists	Y/N or Null
Include in Rosters	Indicates whether this office should be included in rosters	Y/N or Null

Black Knight Paragon - Working with Agents

Black Knight Paragon - Add an Agent

Prior to adding an agent to Black Knight, verify that you have all of the required information for the agent on the Profile tab. Refer to Black Knight MLS - Data Sent to Agents for details.

Select the agent's Real Estate tab.
Click the in the MLS - BlackKnight section.
If you are using the MLS ID generator, click Get MLS ID, this will automatically populate the ID OR enter the MLS ID.
Click Done. IMPORTANT: Once you save the MLS ID, you will NOT be able to change it. Ensure that you have entered the number correctly prior to clicking Done.
Click the in the MLS Information section.
Click Sync with MLS.
Populate the required information. Refer to Black Knight MLS - Data Sent to Agents for details.
Click Done.

Black Knight Paragon - Update an Agent

Any updates made to the date described in Black Knight MLS - Data Sent for Agents will be sent to the MLS. A file is delivered every hour.

Black Knight Paragon - De-activate an Agent

Click the in the MLS Information section.
Ensure Sync with MLS is enabled.
Select Inactive from the Status list.
Click Done.

All information described in Black Knight MLS - Data Sent to Agents will be sent within the hour with no further interaction on your part.

Black Knight Paragon - Data Sent for Agents

The table below describes the data that is sent to Black Night. Files are sent to Black Knight's FTP site hourly.

Field Name	Description	Format	Required
Profile Tab
First Name	The agent’s first name. The first 50 characters are sent.	50	X
Middle	The agent’s middle name	50
Last Name	The agent’s last name. The first 50 characters are sent.	50	X
Common Name	The agent’s nickname or salutation	50
Physical Address	Physical Address 1	100	X
Physical Additional Address	Physical Address 2	50
Physical City	Physical Address City	50	X
Physical State	Physical Address State	2	X
Physical Zip	Physical Address Zip Code	20	X
Mailing Address (Mailing)	Mailing Address 1	100
Mailing Additional Address	Mailing Address 2	50
Mailing City	Mailing Address City	50
Mailing State	Mailing Address State	2
Mailing Zip	Mailing Address Zip Code	20
Office Phone Number	The agent’s office phone number	30
Home Phone Number	The agent’s office home number	30
Fax Phone Number	The agent’s fax number	30
Cell Phone Number	The agent’s cell phone number	30
Other Phone Number	The agent’s other phone number	30
Email	The agent’s email address
WebAddress (Social)	The agent’s social web address	80
Real Estate Tab
Status	Indicates the status of this agent in the MLS: Active Inactive Terminated	Drop-down choice	X
MLS ID	The agent’s MLS ID	25	X
MLS Login	The agent’s MLS Login. This is not updateable after it is set. If we send a different Login Name it will create a new record in Paragon.	20	X
Security Level	The Agent’s permission level in Black Knight. This is defined by the agen’t MSL User Class. NOTE: If the agent is not active, Paragon will automatically set this to 0.	1	X
Office MLS ID	This is the MLS Office ID for the office to which this agent is associated.	25	X
MLS Agent Type	This agent’s MLS Type. These types are created in Paragon. On installation of the software these are populated under setup.	Drop-down choice	X
MLS Status	This agent’s MLS status. These are defined by Paragon: A – Affiliate B - Board ONLY C – Commercial F -Staff M - MLS and Board N – Nonmember S - MLS Only	Drop-down choice	X
Include in Mailing Lists	Indicates whether this agent should be included in mailing lists	Check-box
Include in Rosters	Indicates whether this agent should be included in rosters	Check-box
MLS License	This agent’s MLS License	25
Primary User Board	The agent’s primary user board. This list is customizable by you on installation of the software	20
Real Estate tab – NRDS Info
Member BirthDate	This agent’s birth date. This is set under NRDS Additional Information.	10
NRDS ID	This agent’s unique 9 digit NRDS ID	9

LockBox Integration

SentriLock

GrowthZone offers a data integration with SentriLock’s lockbox solution. The purpose of the synchronization to Sentri-lock is to activate an account for an office or agent, and define the security level afforded that office or agent. The sync happens in real time with updates appearing SentriLock in a matter of minutes. On the Real Estate tab of a contact, there is a "Sync with Lockbox" checkbox that needs to be ticked in order for the system to recognize the sync option. When enabled, GrowthZone will send updates to SentriLock whenever contact information is updated or entered new.

SentriLock - Synchronization Timing

Once SentriLock sync is enabled, updates are sent via API every 5 minutes.

SentriLock - Initial Integration Setup

The GrowthZone team will setup initial integration to SentriLock, with your input. During this process you will decide the following:

What to use for the Lockbox Office Id Source: You will choose from NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
What to use for the Lockbox User Name Source: You will choose from NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
What to use for the Lockbox External Id Source: You will choose NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
Will you “Use Membership Status To Determine Lockbox Status”: If you choose this option, LockBox Member Status will automatically be updated, based on the status of the membership with your association. For example, if an agent has an active membership with your association, and a valid SentriLock status, when you drop that member, the SentriLock status will automatically be updated to Terminated.

SentriLock - Working with Agents

Data sent to SentriLock for Agents

The data described in the table below is synchronized to SentriLock. Each time data is sent to SentriLock, All data is sent, not just the fields that you changed.

Field Name	Description	Required
Profile Tab
First Name	First name of the Agent	X
Last Name	Last name of the Agent	X
Email Address (Primary)	The email address of the Agent	X
Real Estate Tab
NRDS ID	The 9 digit unique ID issued to all NAR members.	X
Status	The agent’s current status within the MLS or membership system. These statuses will control whether or not a user has access within the SentriLock system.	X
Card Status	This field indicates the status of the Agent’s SentriCardÂ®. Use to activate or terminate the card.	X
Member Type	The Member Type indicates the level of access this user should receive to SentriLock	X
User Name	This field indicates the user name for a user to log into the SentriLock system. This field is not required, if not populated SentriLock will generate the User Name.
Password	The user's login password for SentriLock. This field is not required, if left blank, SentriLock will automatically generate a password for the agent.
External ID	The unique ID of an agent in the SentriLock system as supplied by the MLS. The exact context of this value will vary from MLS to MLS. You can enter a custom number OR during initial setup you can elect to automatically assign the Agent NRDS ID or MLS ID	X
Office ID	The office number, or unique id of the office that the agent belongs to. This is required to give them proper office access to the SentriLock system. You may enter an office ID OR, during initial setup you can elect to automatically assign the agents NRDS Office ID or MLS Office ID.	X

Activate an Agent in SentriLock

For the desired agent, click the Real Estate Tab.
Click the icon in the LockBox - SentriLock section.
Click Sync with LockBox.
Enter the LockBox Information (an asterisk denotes a required field):
- Status*: Select Active from from the list.
- Card Status*: Select the agent's card status. Status controls whether or not the agent has access within the SentriLock system.
- Member Type:
- User Name*: Enter this agent's user name to be used for access to the SentriLock software. NOTE: If, during initial setup of your SentriLock integration, you elected to use the NRDS ID or MLS ID this will be noted in the field and the field will be read only.
- Password: This field is not required. You can enter a temporary password for your agent OR if this field is left empty, SentriLock will automatically generate a password for the agent.
External ID: Enter the the SentriLock ID for this agent OR if, during initial setup, you have elected to use the agent's MLS ID or NRDS ID this will be indicated, and the field will be read only.
NRDS Office ID: Enter the NRDS office id for this agent OR if, during initial setup, the agent's NRDS Office ID or MLS Office ID this will be indicated, and the field will be read only.
Click Done. The record will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

Terminate an Agent's Card Status in SentriLock

The agent's card status controls whether or not the agent has access within the SentriLock system. To change the card status:

For the desired agent, click the Real Estate Tab.
Click the icon in the LockBox - SentriLock section.
Click Sync with LockBox.
Select Terminated from the Card Status list.
Click Done. The updated status will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

Terminate/Suspend an Agent in SentriLock

For the desired agent, click the Real Estate Tab.
Click the icon in the LockBox - SentriLock section.
Click Sync with LockBox.
Select Terminated or Suspended from the Status list.
Click Done. The updated status will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

SentriLock - Working with Offices

Data sent to SentriLock for an Office

The table below describes the data that is sent to SentriLock when an office record is added or changed.

Field Name	Description	Required
*Profile Tab*
Contact Name	The name of the Office	X
Address 1	Street address line 1	X
Address 2	Street address line 2
City	City	X
State	State or province abbreviation	X
Postal Code	Zip or postal code	X
Phone Number	The contact phone number of the user. This contact number is used to send text notifications of codes, or showing notifications if the user chooses those options. SentriLock only accepts a single phone number. GrowthZone will send the phone marked as default.	X
Real Estate Tab
Status	The office's current status within the MLS or membership system. These statuses will control whether or not members in that office have access to the SentriLock system.	X
External ID	The identifier for this office in SentriLock. Association's can use any ID they wish or, during initial setup, elect to use the Office MLS ID or NRDS ID.	X

Activate an Office in SentriLock

For the desired office, click the Real Estate tab. NOTE: The office must have a NRDS ID.
Click the icon in the LockBox - SentriLock section.
Click Sync with LockBox.
Select Valid from the Status list.
Enter an External ID or, the field will display NRDS ID or MLS ID if, during initial setup, you have elected to default to one of these ID's.
Click Done. The office record will be sent to SentriLock within five minutes, with no additional interaction on your part.

Suspend/Terminate an Office in SentriLock

For the desired office, click the Real Estate tab. NOTE: The office must have a NRDS ID.
Click the icon in the LockBox - SentriLock section.
Click Sync with LockBox.
Select Suspended or Terminated from the Status list.
Click Done. The updated status will be sent to SentriLock within five minutes, with no additional interaction on your part.

Supra

Supra has provided keyboxes to the real estate industry since 1955, bringing efficiency to real estate professionals and peace of mind to home sellers. By integration with GrowthZone, you are able to setup accounts for your agents/office each has to access a lock-box. In addition to activating new accounts with Supra, you will also be able to change the account, and importantly terminate accounts when needed.

Supra Synchronization Timing

When synchronization is enabled, files are transferred to Supra every hour.

Data Synchronized to Supra

The table below describes the data that is synchronized with Supra. Hourly, your GrowthZone system will look for additions or changes to Supra Data. If there have been any, all of the information in the table below is sent.

Field Name	Description	Data format	Required
Profile Tab
Last Name	Last name of agent	21 Alpha	X
First Name	First name of agent	17 Alpha	X
Middle	Middle initial of the agent	3 Alpha
City (primary)	City	31 Alpha	X
State (primary)	State	2 Alpha	X
Phone (primary)	Area code of & phone number of agent's phone number	23 Numeric
Address 1 (primary)	First line of agent's address line	35 Alpha
Address 2 (primary)	Second office address line	35 Alpha
Zip (primary)	Zip code of agent address	11 Alpha
Country (primary)	Country	4 Alpha
Fax Number (primary)	Area code & Phone number of agent's fax number marked as primary	23 Alpha
Email (primary)	Email marked as primary	64 Alpha
Real Estate Tab
Lock Box Agent ID	Unique Agent ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice	15 Alpha	X
Lock Box Member Status	Agent Status – Active, Hold, Inactive	Drop-down choice	X
LockBox Listing Agent ID	Listing Agent ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice	32 Alpha	X
LockBox Office ID	Office ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice

Initial Integration Setup for Supra LockBox

GrowthZone will perform the initial setup for your Supra Integration. During this process you will have defined, the following:

What to use for the Lock Box Agent ID: You will choose NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with Supra.
What to use for the Lock Box Office ID: You will choose NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with Supra.
What to use for the Lockbox Listing Agent ID: You will choose NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with Supra.
Whether you will enable “Use Membership Status To Determine Lockbox Status”: If you choose this option, LockBox Member Status will automatically be updated, based on the status of the membership with your association. For example, if an agent has an active membership with your association, and a valid LockBox status, when you drop that member, the LockBox status will automatically be updated to Terminated. Conversely, if you re-activate an agent, the LockBox status will be updated to Valid. NOTE: This functionality will only work if there is only one membership associated to the agent.

Supra - Working with Agents

Activate an Agent’s Supra Account

For the desired agent, click the Real Estate tab.
Click the icon in the LockBox - Supra section.
Click Sync With LockBox.
Select Valid from the Status list.
Enter the agent's Office ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
Enter the agent's Agent ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
Enter the agent's Listing ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
Click Done.

Files are automatically sent to Supra every 90 minutes, no further interaction is required. All data defined in Data Synchronized to Supra for Agent will be sent.

Suspend/Terminate an Agent’s Supra Account

For the desired agent, click the Real Estate tab.
Click the icon in the LockBox - Supra section.
Click Sync With LockBox.
Select Suspended or Terminated from the Status list.
Click Done.

All data defined in Data Synchronized to Supra for Agent will be sent to Supra within 90 minutes.

Change an Agent’s Supra Account Record

Any changes made the fields described in Data Synchronized to Supra, above, will result in a change record being sent to Supra. As long a Sync to LockBox is enabled, the system will “notice” these changes and send them within the hour, with no interaction on your part.

Terminate an Agent’s Supra Account Record

On the Agent’s Profile tab, ensure that all required information, defined in Data Synchronized to Supra, above, has been populated.
Click the Real Estate tab.
Ensure that Sync With LockBox is checked.
In the LockBox section, select Terminated from the LockBox Member Status list.
Click Save.

	NOTE: If your system is configured to Use Membership Status To Determine Lockbox Status, dropping an agent's membership to your association, will also result in the LockBox Member Status being set to Terminated. This option is only available if you have one and only one association membership type per agent.

Suspend an Agent’s Supra Account Record

On the Agent’s Profile tab, ensure that all required information, defined in Data Synchronized to Supra, above, has been populated.
Click the Real Estate tab.
Ensure that Sync With LockBox is checked.
In the LockBox section, select Terminated from the LockBox Member Status list.
Click Save.

Disable Synchronization of an Individual Agent to Supra

Any additions or changes to an agent's record, will automatically be synchronized to Supra. You can disable this for an individual agent, if needed:

On the Agent’s the Real Estate tab, deselect Sync With LockBox.
Click Save.

Deselecting this will NOT remove the contact's data from Supra, it will simply stop the updates to the record from being sent.

Supra - Working with Offices

Data Sent to Supra for Offices

The table below describes the information that is sent to Supra for offices. Anytime an office is added, or changed 'All data is sent.

Field Name	Description	Data format	Required
*Profile Tab*
Name (Organization)	Office Name	35 Alpha	X
Address 1 (primary)	First office address line	35 Alpha
Address 2 (primary)	Second office address line	35 Alpha
City (primary)	City	31 Alpha
State (primary)	State	2 Alpha
Country (primary)	Country	4 Alpha
Zip (primary)	Zip	11 Alpha
Phone - Area Code (primary)	Area code of work number	3 Numeric
Phone (primary)	Work phone number	32 Alpha
Fax (primary)	Fax phone number	32 Alpha
Fax (primary)	Area code of fax number	3 Numeric
Email (primary)	Email	64 Alpha
*Real Estate Tab*
Office Id	The unique ID for this office in Supra. You can enter a custom ID, or, if during initial setup you have elected to use NRDS ID or MLS Id it will automatically be populated.	15 Alpha-numeric	X
Status	Office Status - Active, Suspended, Terminated	1 Alpha	X

Activate an Office's Supra Account

For the desired office, click the Real Estate tab.
Click the icon in the LockBox - Supra section.
Click Sync With LockBox.
Select Valid from the Status list.
Enter the Office ID for this office, or, if during initial setup you have elected to use Office MLS ID or NRDS ID, this will be displayed and the field will be read only.
Click Done.

Suspend/Terminate an Office's Supra Account

For the desired office, click the Real Estate tab.
Click the icon in the LockBox - Supra section.
Click Sync With LockBox.
Select Suspended or Terminated from the Status list.
Click Done.

	IMPORTANT If an Office’s LockBox Supra Account is Terminated, all agent’s associated to this office will also be “locked out” of LockBox.

Change an Office’s Supra Account Record

Any changes made the fields described in Data Sent to Supra for Offices, will result in a change record being sent to Supra. As long as Sync to LockBox is enabled, the system will “notice” these changes and send them within the hour, with no interaction on your part.

	NOTE: All fields are sent to Supra, not just those that have changed.

Disable Synchronization of an Individual Office to Supra

Any additions or changes to an Office's record, will automatically be synchronized to Supra. You can disable this for an individual office, if needed:

For the desired office, click the Real Estate tab.
Click the icon in the LockBox - Supra section.
DeselectSync With LockBox.
Click Done.

	NOTE: Disabling the Sync with LockBox will NOT remove the office's data from Supra, it will simply stop updates to the record from being sent from GrowthZone.