Continuing Education

Certification Overview

---

Using the Certifications Module within GrowthZone allows associations to administer, track, and report on the professional certifications of their members. With the proper setup, associations can save themselves and their members time in managing the courses, exams, and other tasks necessary to gain or maintain a certification. The module is built so that both simple and complex scenarios can be accommodated. It is important to note that the Certification Module does not deliver instruction or coursework, rather, it keeps track of necessary elements and the completion date of each.

Certification Definitions

---

• Certification a collection of components that, when completed, attest to a person’s knowledge, skill, or level of achievement in a particular area.

• Component an element that when completed counts towards a certification. In GZ, components are courses, exams, or tasks. Components may have objectives assigned to them and there may be pre-requisites.

• Course a class or group of tasks, the completion of which earns a person hours or credits towards a certification. GZ does not house or deliver courses, it simply allows associations to track their completion.
• Exam a test, the passing of which earns a person hours or credits towards a certification. GZ does not house or deliver courses, it simply allows associations to track their completion.
• Task something other than a Course or Exam that needs to be accomplished in order to earn a certification. Tasks may include attendance at an event, uploading a document, or other actions.

• Objective what it is you want a person to know, understand, or be able to do; a specific result that a person aims to achieve. In GZ, objectives are assigned to components, following the logic that if you complete the component you will likely meet the objective.

A Certification is made up a X number of Components. It can be as simple as taking a single Exam, or as complex as a series of courses, exams, and tasks which must be taken in a specific order with minimum scores achieved.

Certification Initial Setup

---

Configure Certification General Settings

---

The Certification General Settings allow you to define the number of days prior to the expiration of a certification that an automated email will be sent, and which or your lists/committees will receive a notification when final certification requires administrative review.

1. Click Setup in the left-hand navigation panel.
2. Click General Settings in the Certification section.

   

3. Configure the following:
   • Send 'Certification Expiring' Emails n Days Before Expiration: Enter the number of days, prior to the expiration of a certification, that you wish to send an automated email will be sent to the certified individual.
   • List/Committee that receives Admin Review Required email: You may setup final certification to require approval. Select the list/committee that should receive the notification when an approval is needed.
4. Click Save.

Configure Certification Categories

---

Certification categories allow you to divide your certifications into "buckets" of share characteristics.

1. Click Setup in the left-hand navigation panel.
2. Click Category Lists in the Categories section.

   

3. Click the Add button. Setting up your category lists is a two step process. First you will add your list, then you will at the actual categories to that list.

   

   • Enter a Name for the category list.
   • Enter an optional Description of the list.
   • Enable Can Be Used Publicly? if you wish to display the category list publicly.
   • Is Active is enabled by default.
4. Click Done.
5. Next you will add the category items to your list. Click the hyper-link for the category list you just created.

   

   The Category Items dialog box will be displayed.

   

   • Click Add to add an individual category OR click Add Multiple to add a list of items (shown below).

   

6. Enter the names of your category items (one per line). If you have selected to add an individual item, you will only enter one item.
7. Click Done.

Set up a Certification

---

While you technically do not need to create the parts of a certification in a specific order, it does make some sense to do some things first so you don’t have to go back after the fact and add them.

• Certification Category Creating Certification Categories allows for better organization and more granular reporting. This can created on the fly, but it’s nice to have them ready to go
• Fee Items If you will be charging for the Certification through GrowthZone you will need a fee item. If you do not have permissions to the Finance area you will need to work with someone who does to have this created ahead of time
• Terms & Conditions You can have multiple Terms & Conditions and display the appropriate/relevant one on each Certification. Depending on your permissions you may need someone else to create these for you ahead of time. NOTE: There is no built-in checkbox an end user must check to verify they have read and understand the Terms & Conditions before they can move on. The Terms & Conditions are simply displayed for the user.

Add a Certification

---

1. Click on the Certifications tab within the Certifications Module

   

2. Click on the Add Certifications button

   

3. Configure the following:
   • Name Name of Certification. Required

   • Code free form.
   • Version Version of this Certification--very helpful when requirements change from year to year.
   • Description Description of Certification. Not required, but helpful for your members.
   • Certification Category Category of this certification. Helpful for sorting, finding, and reporting.
   • Certificate Template If providing a certificate upon completion, select the template here.

   • Credits/Units/Hours
   • Credits Required/Hours Required How many credits or hours are needed to be certified (Best practice is to use either credits OR hours. The system does not compute one to create the other and will only use one)
   • Credits To Maintain/Hours to Maintain How many credits or hours are needed to maintain the certification. Again, use either credits OR hours, not both.
   • Prerequisites Certifications that must be completed before this Certification can be started
   • Availability
   • Enrollment Start Date/Enrollment End Date The start and end dates of the enrollment period of the certification.
   • Requires Approval Creates a checkbox in the Tracking area and requires a staff member to check the box before the member is allowed to proceed.
   • Is Active When checked the certification is available and will be available in the Info Hub for enrollment
   • Pricing
   • Fee Item Select the Fee Item being used if charging for this Certification
   • Short Description Will default to the description of the fee item. Edit if necessary. Will be the line item on the invoice
   • Member Price Will default to the price set for the fee item. Edit if necessary.
   • Allow Invoicing If checked allows member to sign up and be invoiced later. If not checked, member must pay with a credit card at the time of enrollment.
   • Objectives Objectives are actually assigned at the component level and are simply displayed here
   • Terms/Conditions Will provide a link to display any legal language related to the certification
4. Click Done

Add Certification Components

---

Components are individual items that count towards a Certification. A component may be be a course, an exam, or a task. You may choose to have objectives for components and you have the option of setting a prerequisite for a Component, though prerequisites at the Component level should be used judiciously.

The Components screen within the Certification Module will contain all of the Components for all of the Certifications and could grow to be quite large. Search, Preset Filters, Custom filters, and Sort options are all available to make it easier to find what you are looking for.

NOTE: If you wish to include objectives, exams and tasks in a course configure these first.

/or

Add a Certification Component - Exam

---

1. In the Certifications module, select the Components tab.

   

2. Click the Actions button.
3. Select Add Exam.

   

4. Enter a Name for the exam.
5. Enter a Code for the course (optional).
6. Enter a Description of the exam.
7. Enter the Availability Opens date. This indicates when the exam will open.
8. Enter the Availability Closes date. This indicates when the exam will close.
9. Enable the Is Active check-box to make this exam active. Best practice, when a course is no longer active, is to de-activate the exam.
10. Enable Requires Approval.
11. Enter the Instructor. This is useful if you need to track who proctored the exam.
12. Configure the Upon Completion options (optional) :
    • Hours Earned.
    • Credits Earned.
13. Configure the following Exam Info:
    • System Certification Exam Type: Select the exam type from the drop-down list.
    • System Certification Scoring Type: Select the scoring type from the drop-down list. Options include Passed/Failed and Scored.
    • Max Score: If System Certification Scoring Type is set to Scored, enter the maximum that can be scored on the exam.
    • Passing Score: If System Certification Scoring Type is set to Scored, enter the passing score for the exam.
14. Add any Objectives. Click the to add objectives. Add all objectives as needed.
15. Add any Prerequisites needed prior to taking this exam. Logic in the system will prevent the applicant from taking the exam if the pre-requisite(s) has not been met. Click the File:Orange plus icon to add all needed pre-requisites.
16. Configure the fees for this exam (optional):
    • Select the Fee Item from the drop-down list. The Price set for this fee item will automatically be populated. This may be over-ridden as needed.
17. Click Done.

Add a Certification Component - Task

---

NOTE: Task components may include pre-requisites and objectives. If they are needed, best practice is to setup the pre-requisites and objectives prior to setting up tasks.

1. In the Certifications module, select the Components tab.

   

2. Click the Actions button.
3. Select Add Task.

   

4. Enter a Name for the task.
5. Enter a Code for the task (optional).
6. Enter a Description of the task.
7. Enter the Availability Opens date. This indicates when the task will open.
8. Enter the Availability Closes date. This indicates when the task will close.
9. Enable the Is Active check-box to make this task active. Best practice, when a tasck is no longer active, is to de-activate the task.
10. Enable Requires Approval.
11. Enter the Instructor. This is useful if you need to track who proctored the exam.
12. Configure the Upon Completion options (optional) :
    • Hours Earned.
    • Credits Earned.
13. Add any Objectives. Click the File:Orange plus icon to add objectives. Add all objectives as needed.
14. Add any Prerequisites needed prior to completing this task. Logic in the system will prevent the applicant from completing this task if the pre-requisite(s) has not been met. Click the File:Orange plus icon to add all needed pre-requisites.
15. Configure the fees for this task (optional):
    • Select the Fee Item from the drop-down list. The Price set for this fee item will automatically be populated. This may be over-ridden as needed.
16. Configure the Requirements for this task.
    • Hours Required for Completion.
    • Credits Required for Completion.
17. Click Done to save the new task.

Objectives

Often set by a national or governing organization, objectives are attached to components such that if a person successfully completes the component they meet the objective. Objectives are not required for Components or Certifications.

NOTE: If Objectives are part of a Component it is helpful to set them up first, though you can go back later and add them.:

The Objectives area includes Objective Collections, Objective Categories & Sub-Categories, and the actual Objectives.

Add Objective Collections

Individual objectives must live in a “bucket” of related objectives. In GrowthZone, these buckets are called Collections and they are displayed on the Objectives tab of the Certification module. Objectives are also displayed in the Info Hub when certifications are included.

To add an Objective Collection:

1. Click on the Objectives tab within the Certifications module
2. Click on the Add Objectives Collection' button

   

3. Enter the appropriate information in the Add Objective Collection" window

   • Code Optional, but helpful for organization and reporting. At the Collection level the code will likely be the year of this iteration of the collection.
   • Name Name of the collection
   • Description Description of the collection. Optional

   

4. Click Done

Objective Categories

---

An Objective Category is a division of a Collection into which Objectives (or other Objective Categories, called Sub-Categories) are entered. They are not required but can be helpful to associations that have a narrow collection of objectives that go fairly deep. Categories can have sub-categories, and sub-categories can also have sub-categories, allowing for very granular organization.

Visually you can distinguish between Categories/Sub-Categories and Objectives by the indenting (Objectives will be indented below their Category), as well as the icons along the right hand side. Categories/Sub-Categories have 4 icons whereas Objectives have only 2.

Add an Objective Category

---

1. On the Objectives tab, click on the Collection Name.
2. Click on the Add Objective Category button in the top right corner.

   

3. Configure the following:
   • Category Name Use to select the parent category IF you are adding a sub-category
   • Category Code Will display the Code of the Category Name if one is selected
   • Code Similar in function to the Collection Code, used for organization and reporting
   • Name Name of the Category
   • Description Description of the Category
4. Click Done

NOTE: You can add Sub-categories directly to a Category or other Sub-category by clicking on the Folder icon () in the Actions column of the Category/Sub-Category

Objectives

Objectives are the skills/knowledge that is required. They are added to Collections and can be “stand alone” or assigned to a Category.

To add an Objective as a "stand alone",

1. Click on the Collection Name on the Objectives tab within the Certifications module
2. Click on the Add Objective button in the top right corner
3. Enter the appropriate information in the Add Objective" window (see below for notes on this)
4. Click Done

To add an Objective to a Category/Sub-Category,

1. Click on the Collection Name on the Objectives tab within the Certifications module
2. Click on the Plus icon () in the Actions column of the Category/Sub-Category to which you want to add the Objective
3. Enter the appropriate information in the Add Objective" window (see below for notes on this)
4. Click Done

• Category Name Use this drop down to assign the Objective to a Category if you clicked on the Add Objective button and you want to assign it to a Category. If using the Plus Sign icon this will be pre-populated accordingly.
• Category Code Will display the Code of the Category Name when one is selected
• Code Similar in function to the Collection and Category Codes, used for organization and reporting
• Name Name of the Objective
• Description Description of the Objective