Real Estate Integration

GrowthZone's Real Estate Edition provides features required by most National Association of REALTORs Associations for managing their real estate data. The features include an additional tab on contact records to store real estate data, data sync management, and other necessary resources. The software supports integration to NRDS, various MLS, and Lock-box solutions.

Upon installation of the software, you will work with your on-boarding project manager to configure the settings necessary to seamlessly integrate to the various solutions.

NRDS Integration

---

The GrowthZone integration with the National Association of REALTORS’ NRDS database provides association staff an easy way to manage their contacts’ NRDS data. Select data entered or changed in GrowthZone is automatically pushed to NRDS, thereby updating agent and office records in NRDS. Data is pushed every ten minutes to ensure your records in NRDS are always up to date.

IMPORTANT Transfers are NOT done in GrowthZone. If a transfer is needed, this must be done in NRDS

NRDS Integration Initial Setup

---

Upon installation of the software, you will work with your on-boarding project manager to configure the settings necessary to seamlessly integrate to NRDS.

Link NRDS, MLS, Lockbox Status to Membership Status

---

Automatically deactivating or reactivating a member’s access to related real estate services (MLS, Lockbox, NRDS) based on their membership status with your association provides significant time savings for your staff. During initial configuration of your system you can set the rules to be applied to NRDS, MLS and Lockbox status, based on a change on an agent's membership status. When a membership is suspended, dropped, or reactivated, the system will reference these settings to adjust real estate service settings accordingly. NOTE: Prior to setting up this automation, you should have completed all integration setup for your MLS, Lock Box, and NRDS. Additionally, this step should be performed after your membership types have been created.

Define Membership Status to NRDS, MLS, Lockbox Status Rules

---

To define your rules:

1. Click Setup in the left-hand navigation panel.
2. Click Membership Settings in the Membership section.
3. Click Real Estate Settings.

   

4. To set the rules for your membership types, click the Add button.

   

5. Select the Membership Type to which you wish to apply rules.
6. For each Membership status, select the rule to be applied to NRDS, MLS and/or LockBox. Note: The choices available will be dependent on your service provider, and you do not have to set rules for all providers.
7. Configure Days Overdue to Allow Reactivation: This option allows you to set a window within which invoices can be over-due and still allow the system to automatically reactivate a suspended members. This is especially important if you are billing members on a monthly basis.

   For Example:

   • Default invoice terms set to Due on Receipt, and Days Overdue to Allow Reactivation is set to 20.
     • Monthly billing is run on the 1st, and allow members to remain active if the invoice is paid by the 20th (i.e. within 20 days).
     • Agent A has an open invoice run on July 1st. On July 21, the system switches them to inactive. Then August billing comes out, and on August 7th Agent A remembers to log in to their Info Hub account and pays their July invoice, but leaves the August invoice unpaid.
     • Because they are within that 20 day window of the August invoice, the system will reactivate them; they aren’t “overdue” until August 21st due to the 20 days setting in the Days Overdue to Allow Reactivation.

8. Click Done.

Repeat the steps above for each membership type to which you wish to apply rules. NOTE: You do not need to perform this step for all membership types. If no rules are set for a membership type, no changes to NRDS, MLS or Lockbox status will automatically occur.

Sentrilock: The Null status is currently not available for selection when setting up automation. If your association is not updating an individual's SentriLock card status, the card status should be left as No Change.

Change Membership Status to NRDS, MLS, Lockbox Status Rules

---

1. Click Setup in the left-hand navigation panel.

   

2. Click the icon in the Actions column.

   

3. Make the desired changes.
4. Click Done.

Delete Membership Status to NRDS, MLS, Lockbox Status Rules

---

1. Click Setup in the left-hand navigation panel.
2. Click Membership Settings in the Membership section.
3. Click the Real Estate Settings tab.

   

4. Click the icon in the Actions column for the set of rules you wish to delete.
5. Click OK to confirm.

NRDS - Working with Offices

---

Although Offices are not "members" of the Realtor organization (the Realtor association is an individual member organization), the Office record must exist because each member must be linked to an office. This follows how licensure works in each state. Also, the office name, address, phone, etc is stored once in the office record so if an office changes the POE does not have to change that information in every agent record.

The POE for the Primary association of the Office can add or change an office for that association:

• Add tells NRDS to Add the record. If NRDS finds an office record already exists with the same Office ID it will process the Add as a Change without the necessity of sending the record again. There is one exception to this rule: if the Office Name in the Add is different than the Office Name in the existing record then NRDS will reject the record and require that the record be sent as a Change rather than an Add.
• Change tells NRDS to Change the record. If NRDS finds that an office record does not already exist by checking the Office ID it will process the Change as an Add without the necessity of sending another record.

Working with Primary Offices

---

Data sent to NRDS for a Primary Office

---

The fields described in the table below are synchronized to NRDS.

Field Name	Description	Data format	Required
Initial Setup
POE Association (read only)	This field will automatically fill in with Association’s Point of Entry ID. This i configured during initial setup of the association	9 Numeric
Association Id (read only)	The 4-digit local association ID where this office has primary membership. This is configured during initial setup of the association.	4 Numeric	X
Profile Tab
Name	Required. Business name of the office.	30 Alpha	X
Real Estate Tab
NRDS ID	The unique 9-digit NRDS ID assigned to this office location.	9 Numeric	X
Join Date	The date the office joined the association.	8 Date
NRDS Status	Required. Status of the office record: A  Active I  Inactive T  Terminated	1 Alpha	X
StatusChangedDate	Date of the last status change.	8 Date
Non-member Salespersons	The number of non-member salespersons affiliated with this office. If the POE has verified there are no non member salespersons in this office, then a zero  '0' must be sent.	5 Numeric	X
Office DR NRDS ID	The DR of this company, whether or not they are at this location. This must be a valid 9-digit member ID.	9 Numeric	X
Primary State	Required. The 4-digit State association ID where this office has primary membership.	4 Numeric	X
Office Corporate Name	Corporate name of the office, if different from the business name.	30 Alpha
Office Type	Used by association to track office type such as Residential, Commercial, Affiliate, etc.	4 Alpha
NRDS Physical Address - Street	Street name and address number of office.	30 Alpha	X
NRDS Physical Address - Attn/Care of	This is a second line of address to be used for additional address information (building number, etc.)	30 Alpha
NRDS Physical Address - City	Name of city.	21 Alpha	X
NRDS Physical Address -State	State abbreviation.	2 Alpha	X
NRDS Physical Address - Zip Code	The 5-digit US Postal zip code.	5 Alpha	X
NRDS Physical Address - Zip + 6	Standard 4-digit ZIP extension plus 2-digit carrier route.	6 Alpha
NRDS Mailing Address	The mailing address where mail should be sent, if different from Street Address.	30 Alpha
NRDS Mailing Address - Mail Attn/Care Of	Additional line for mailing address.	30 Alpha
NRDS Mailing Address - City	City for mailing address.	21 Alpha
NRDS Mailing Address - State	State abbreviation for mailing address.Main	2 Alpha
NRDS Mailing Address - Zip Code	5-digit zip code for mailing address.	5 Alpha
NRDS Mailing Address - Zip + 6	4-digit Zip extension plus 2-digit carrier route for mailing address.	6 Alpha
Phone Number - Office Area Code	3-digit area code for office’s phone number.	3 Numeric	X
Phone Number - Office Phone Number	7-digit phone number for the office. There is no need to type in the dash ( -) when entering numbers.	7 Numeric	X
Fax Number - Area Code	3-digit area code for office’s fax number.	3 Numeric
Fax Number - Number	7-digit fax number for the office. There is no need to type in the dash ( -) when entering numbers.	7 Numeric
Additional Phone Number	Phone Number for secondary phone for the office, if needed.	7 Numeric
Email Address	Email address for office.	80 Alpha
Website	Internet address for office’s web page, if any.	80 Alpha
Office DR NRDS ID	The Designated Realtor (DR) for this 0ffice,  whether or not they are at this location. This must be a valid 9-digit NRDS ID. If the DR does not exist in NRDS, NAR recommends using  the 9 digit NRDS for an association staff member to enter the office into the NRDS database. Once the office has been entered into NRDS you will be able to add the Agent, and update the DR NRDS ID for the office.	9 Numeric	X
RE: Office Manager NRDS ID	Required. This field is to track the contact person at this office location when it is not the same as the DR. When adding an Office, if this location's Office Contact Manager is the same as the Member entered for Office Contact DR, this field may be null.  If Null, upon the Add, this field shall default to the same Member ID as was entered in Office Contact DR.	9 Numeric	X
Stop Mail	Indicates whether mail should be stopped to this address.  .	1 Alpha
Stop Fax	Indicates whether the office wishes the fax number to be used.	1 Alpha
Stop Marketing Material	Indicates whether the office wishes to receive “junk” mail from mailing lists, etc.	1 Alpha
Additional Information
Franchise ID	This field is used to indicate the franchise, if any, with which this office is affiliated. Franchise ID must be a valid 9-digit Office NRDS ID in the NRDS database.	9 Numeric
Parent Company NRDS ID	This field is used if this office location is affiliated with a parent company. Parent ID must be a valid 9-digit Office NRDS ID in the NRDS database.	9 Numeric
District	Use reserved for association to track geographic or political districts.	4 Alpha
Tax ID	The taxpayer identification number for the business.	12 Alpha
Corporate License	The office’s corporate or business license.	12 Alpha
Main Office ID	If this office location is a branch office, use this field to enter the Main Office’s unique 9-digit ID. The main office must be a valid Office ID in the office database.	9 Numeric
Branch Type	Code to indicate if this location is: M   Main office B   Branch Office S   Single office - no branch locations.	1 Alpha
Billing Office ID	Used to track the office ID of the billing office. This ID must be a valid 9-digit ID in the office database.	9 Numeric
Office Contact Unlicensed	Alpha field for 30 characters. Enter the office contact name if they are not a member.	30 Alpha
On Roster	Y if office should be on roster; N if they should not.	1 Alpha
MLS Online Status	Status of office’s access to MLS system.	1 Alpha
MLS Online Status Changed Date	Date of last MLS status change.	8 Date
MLS Office ID	MLS ID number for this office.	10 Alpha

Search NRDS Database for Offices

---

Prior to synchronizing any of your office data to NRDS, it is recommended that you search the NRDS database. By searching NRDS, you can verify whether the office already exists in the NRDS database and avoid duplication. NOTE:' The Search NRDS/Add Office button is only displayed when a NRDS ID has not been assigned to the office.

To search the NRDS database:

1. For the desired office, click the Real Estate tab.

   

2. Click the Search NRDS/Add Office button.

   

3. Enter any of the fields to be used in searching NRDS. The more filters you can supply, the more efficient the search of NRDS will be.
4. Click Search NRDS. Any matching results will be displayed.

   

• If the office is NOT is found, and you are the POE for the office, select Create New. See Add a Primary Office for further instructions
• If the office is found, select the matching office. Review the information returned by NRDS to GrowthZone in the NRDS Information section:
  • If the office is Active with another POE, enter the office as a Secondary. See Add a Secondary Office.
  • If the office is Inactive, you will not be able to sync with NRDS. You must access the NRDS database and update the record accordingly.

'

NRDS - Add a Primary Office

---

Adding an office with NRDS is performed on the Real Estate tab. Offices are not members of NAR, but need to exist in the NRDS database. Prior to adding a new office to NRDS, search the NRDS database as described in Search NRDS Database for Office.

NOTE: If NRDS finds an office record already exists with the same Office ID it will process the Add as a Change without the necessity of sending the record again. There is one exception to this rule: if the Office Name in the Add is different than the Office Name in the existing record then NRDS will reject the record, and return an error. You will need to update the office name in NRDS OR change the name in GrowthZone to match the NRDS record.

1. For the desired office, click the Real Estate tab.
2. Click the Search NRDS/Add Office button. By searching NRDS, you can verify whether the office already exists in the NRDS database and avoid duplication. Adding a brand new office, assumes that no matching records are found. Search NRDS Database for Office.

   

3. Click the Create New radio button.

   

4. Tick Sync to NRDS sync.
5. Click the Get NRDS Number button. The next NRDS available will be assigned to the office. NOTE: If Tie Account Number To NRDS Number the account number for this office will be automatically updated with the NRDS ID.
6. Complete the following fields, an asterisk denotes a required field. If the field is not populated the sync of this record to NRDS will fail. See Data Sent to NRDS for a Primary Office for a detailed description of each field.
   • Active Since*: The date this office joined NRDS.
   • NRDS Status*: Select the appropriate status for this office. For a new office, to be activated in NRDS, select Active.
   • Non-Member Salespersons*: NM is Non-member licensees who work in this Realtor office but choose not to join the association. NOTE: Because it is a required field, if this office does not have any NM Salespersons, you must enter a zero in this field.
   • Office DR NRDS ID*: Enter the NRDS ID of the The Designated REALTOR (DR) for this office. This must be a valid 9-digit member ID. The DR must exist in NRDS. See note below.
   • Office Manager NRDS ID: This field is to track the contact person at this office location when it is not the same as the DR. If this location's Office Contact Manager is the same as the Member entered for Office Contact DR, this field may be left empty.
   • Primary State: Select the state where this office has primary membership.
   • Local Join Date: The date this office joined your association.
   • Office Formal Name: This field can be used to enter the full name of the Office, up to 60 characters. Because the Office Business Name is limited to 30 characters due to mailing restrictions, use this field to fully describe the office name for your own use.
   • Office Type: This field can be used to track office type such as Residential, Commercial, Affiliate, etc.
7. Communication Options:

   • Stop Mail: Tick the radio button to exclude the office from from mailings, including the Realtor Magazine.
   • Stop Fax: Tick the radio button if the office does not wish the fax number to be used.
   • Stop Marketing Material: Tick the radio button to stop any marketing materials from being sent to this office.
   • Physical Address: Select the physical address to be used for this office. Addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another address.
   • Mailing Address (if different than Physical Address): Select a mailing address if needed. Addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another address.
   • Email Address: Select an email address for the office. Email addresses displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another email address.
   • Phone Number: Select a phone number for the office. Phone Numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another phone number.
   • Additional Phone Number: Select an additional phone number for the office. Phone Numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another phone number.
   • Fax Number: Select a fax number for the office. Fax numbers displayed in the list are those that you have configured on the Profile tab. If needed, click the icon to add another fax number.

8. Click Done.

The new office will be synched to NRDS within 15 minutes, no additional interaction is required on your part. Additional information for the office can be added under the Additional Information section on the Real Estate tab. See NRDS - Add Office Additional Information for further details.

IMPORTANT! NRDS requires that the Office DR NRDS ID be sent when you are adding a new office. This requires that the DR exist in the NRDS database as an Agent. However, when adding a new office AND a new agent to NRDS, the agent's NRDS record will not be present yet. So it will reject the office and the agent update. NRDS recommends the following process for handling this situation: Add the office using the NRDS ID of one of your staff members as the Office DR NRDS ID. Add the agent that will become the DR for the office, and sync to NRDS. After both the office and the agent have been added to NRDS you will then be able to update the Office DR NRDS ID in GrowthZone and this change will be sent to NRDS.

NRDS - Add Office Additional Information

---

Additional information may be tracked for a NRDS office through your GrowthZone software, and synched to NRDS. This information is NOT required.

1. For the desired office, click the Real Estate tab.
2. Click the icon in the Additional Information section.

   

3. Enter the following:
   • Parent Company NRDS ID: Used if this office location is affiliated with a parent company. Parent ID must be a valid 9-digit Office ID in NRDS database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
   • District: This is used for associations to track geographic or political districts.
   • Main Office ID: If this office location is a branch office, use this field to enter the Main Office’s unique 9-digit NRDS ID. The main office must be a valid Office ID in the NRDS Database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
   • Branch: This field is used to identify the branch type. Select from: Branch Office, Main Office, Single Office.
   • Billing Office ID: Use this field to track the office ID of the billing office. This ID must be a valid 9-digit NRDS ID in the NRDS database. The system will check that any IDs in this field are valid Office IDs and are Active in NRDS. NRDS will reject any office records that contain an Office ID in any of these fields that is the same as the Office ID of the office record itself. You cannot self-reference the Office record’s Office ID in these fields.
   • Office Contact Unlicensed: If the office is un-licensed, enter the office contact name if they are not a member.
   • On Roster: Select Yes if office should be on roster; No if they should not.
   • Franchise ID: Use to indicate the franchise, if any, with which this office is affiliated. Franchise ID must be a valid 9-digit NRDS Office ID in the NRDS database.
   • Office Corporate Name: Corporate name of the office, if different from the business name.
   • Tax ID: The taxpayer identification number for the business.
   • Corporate License: The office’s corporate or business license.
   • MLS Online Status Changed Date: This is a read only field, that indicates when the MLS On-line Status was updated.
   • MLS Online Status: Date of last MLS status change.
   • MLS Office ID: The MLS ID number for this office.
4. Click Done.

NRDS - Change a Primary Office Record

---

Any changes to the NRDS data listed in Data sent to NRDS for a Primary Office will automatically be sent to NRDS as long as Enable Sync to NRDS is checked on the Real Estate tab for the office. All data fields are sent not just those that have changed.

NOTE: If NRDS finds that an office record does not already exist by checking the Office ID it will process the Change as an Add without the necessity of sending another record.

NRDS - Update Primary Office NRDS Status

---

1. Click the Real Estate tab.

   

2. Click the icon in the NRDS Office Information section.
3. Select the appropriate status from the Status list.
4. Click Done.

IMPORTANT: NRDS will not accept an office drop if there are agents related to the office that are still active. Deactivate or move the agents first, then deactivate the office.

NRDS - Working with Secondary Offices

---

The secondary office settings allow you to track secondary relationships of offices. For example, if your association is not the POE for an office, but they have a membership with you, you will track this as a secondary record. A limited amount of information is sent to NRDS for a secondary record. As described in Data Sent to NRDS for Secondary Office record.

Data Sent to NRDS for Secondary Office record

---

The table below describes the data sent to NRDS for a supplemental record.

Field Name	Description	Data format	Required
Initial Setup
Association Id (read only)	The 4-digit local association ID assigned to the association itself. This is configured during initial setup of the accociation	4 Numeric	X
Real Estate Tab
NRDS ID	The unique 9-digit NRDS ID assigned to this office location.	9 Numeric	X
NRDS Status	Required. Use this field to indicate the Status of the Secondary record.	1 Alpha	X
Status Changed Date	Enter the date you changed the status of this Supplemental record	8 Date
Non-member Salespersons	The number of non-member salespersons affiliated with this office. If the POE has verified there are no non member salespersons in this office, then a zero  '0' must be sent.	5 Numeric	X

NRDS - Add a Secondary Office

---

The primary association field, in NRDS, indicates which association first added this office. If your association also needs to be associated with this office because you have members linked there, you can add these with via your GrowthZone software, and the supplemental data will be synchronized to NRDS.

IMPORTANT: You can only add an Office Secondary record if the Office itself exists on NRDS and is Active. Perform a search of the NRDS database to confirm that the record exists. If the office does not exist or is Inactive, NRDS will reject the transaction. Be sure to review the Event Log for errors.

1. For the desired office, click the Real Estate tab.
2. Search NRDS as described in Search NRDS Database for Offices to ensure that the record exists. Select the matched office. A limited amount of NRDS data will be returned by NRDS to GrowthZone. NOTE: The status of the office will be returned by NRDS. If the status is NOT active, you will not be able to sync a secondary record to NRDS. Changes to the status of the office will need to be performed within NRDS prior to being able to sync the secondary record.
3. Click the icon in the Secondary Office section.

   

4. Click Sync to NRDS.
5. Populate the following fields. An asterisk indicates a required field (NOTE: Status Changed Date will automatically be populated).
   • Status*: Select Active from the drop-down list.
   • NM Salesperson Count*: Use the field in this table to report the number of non-member salespersons in this office that the broker will pay for through his Secondary association.
6. Click Done. The Done button will not be enabled if any of the required fields are missing.

The new secondary office record will immediately be sent to the NRDS processing queue. All data described in Data Sent to NRDS for Supplemental Office will be sent, no further action on your part is required.

Change a Secondary Office Record

---

The CHANGE will process the changes sent for an existing office supplemental. You cannot change the OfficeID/AssociationID. You would need to inactivate the record and add a new one. Only the POE who added the office supplemental record can change it. When Sync With NRDS is checked, on the Real Estate tab, any changes made to the fields listed Data Sent to NRDS for Secondary Office will trigger a change transaction. All fields will be sent, not just those that you have changed.

1. On the Office Real Estate tab, click the icon in the Secondary Office section.

   

2. Ensure Sync to NRDS is enabled.
3. Make desired changes.
4. Click Done. The changes to the supplemental office will immediately be sent to the NRDS processing queue, no further action is required. NOTE: The Done button will not be enabled if any of the required fields are missing.

Change NRDS Status of a Secondary Office

---

To change the status of a secondary office:

1. On the Office Real Estate tab, click the icon in the Secondary Office section.
2. Ensure Sync to NRDS is enabled.
3. Select the desired status from the Status list.
4. Click Save. The changes to the supplemental office will immediately be sent to the NRDS processing queue, no further action is required. NOTE: The Save button will not be enabled if any of the required fields are missing.

NOTE: All fields listed in Data Sent to NRDS for Secondary Office Record will be sent to NRDS.

Working with Primary Agents

---

The Agent record in NRDS is the "foundation" of the association. If you are the POE, via GrowthZone you can add and change your primary agent data in NRDS. The ADD will add a new member record in NRDS. A POE can add a member only for an Association ID for which they are the POE. The CHANGE will process the changes sent for an existing member. You cannot change a member that is inactive (Status I or T). Only the POE for the primary association can change a member. Only the POE for the Primary association of the agent can Add an agent to that association or change the agent record.

Agent Data sent to NRDS (Primary)

---

The table below describes the data that is sent to NRDS for a Primary Agent.

Field Name	Description	Data format	Required
Initial Setup
POE Association (Read only)	The  Association’s Point of Entry ID. This is configured on initial setup of the GrowthZone database and will be read only on the Real Estate tab. This ID will automatically populate on the Real Estate tab as read only.	9 Numeric	X
Association ID	The 4-digit local association for this member’s primary affiliation. This is configured upon initial setp of the GrowthZone database, and will be displayed - read only - on the Real Estate tab.	4 Numeric	X
Profile Tab
First Name	Required. Member’s first name.	12 Alpha	X
Middle	Member’s middle name.	12 Alpha
Last Name	Required. Member’s last name, up to 30 characters.	30 Alpha	X
Suffix	Family generation and other suffixed - e.g. Jr.  Sr.  III  Esq. Note: do not enter designations here. There is a separate field for those.	3 Alpha
Common Name	Member’s nickname	12 Alpha
Prefix	Formal title which precedes member’s name  Mr. Ms. Mrs. etc,	4 Alpha
Gender	Male/Female	1 Alpha
Address 1	Street name and address number of member’s  address.  Type of address is assigned on the Real Estate tab.	30 Alpha	X
Address 2 (see above)	This is a second line of address to be used for additional address information (building number, etc.).  Type of address is assigned on the Real Estate tab.	30 Alpha
City (see above)	Name of city for the address.  Type of address is assigned on the Real Estate tab.	21 Alpha	X
State (see above)	State abbreviation.  Type of address is assigned on the Real Estate tab.	2 Alpha	X
Postal Code (see above)	The 5-digit US Postal zip code.  Type of address is assigned on the Real Estate tab.	5 Alpha	X
Postal Code +4 (see above)	Standard 4-digit ZIP extension plus 2-digit carrier route.  Type of address is assigned on the Real Estate tab.	6 Alpha
Address 1	The mailing address where mail should be sent, if different from Home Address, marked as Mailing Address on the Real Estate tab.	30 Alpha
PR: Address 2 (see above)	Additional line for mailing address.  Type of address is assigned on the Real Estate tab.	30 Alpha
City (see above)	City for mailing address.  Type of address is assigned on the Real Estate tab.	21 Alpha
State (see above)	State abbreviation for mailing address.  Type of address is assigned on the Real Estate tab.	2 Alpha
Postal code (see above)	5-digit zip code for mailing address.  Type of address is assigned on the Real Estate tab.	5 Alpha
Postal code +4 (see above)	4-digit Zip extension plus 2-digit carrier route for mailing address.  Type of address is assigned on the Real Estate tab.	6 Alpha
Real Estate Tab
NRDS ID	The unique, 9-digit NRDS ID for this member. Once this field it populated, it is greyed out and read only.	9 Numeric	X
Member Type	The membership type of this agent	Drop-down list	X
Active Since	The date the member joined NRDS	8 Date	X
Local Join Date	The date this agent joined the association.
Status	Member status See NRDS Documentation for further explanation on how/when these are used.	Drop-down list	X
Status Changed Date	The date of last status change.	Date format
Primary State	The State association where this member has primary membership.	Drop-down list	X
License	Required if Member Type is R or RA. Member’s real estate license number. This must match the format set by the state associations.	11 Alpha	X
RE: Primary Field of Business	Indicates member’s primary field of business.	Drop-down list	X
Office NRDS ID	The unique 9-digit NRDS ID for this member's Office. This ID must be valid in the NRDS database.	9 Numeric	X
Real Estate Tab - Communications
Stop Mail	Indicates whether or not to exclude active members from mailings, including the Realtor Magazine.  NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Fax	Indicates if fax number is usable for fax mailings.  NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Marketing Material	Indicates whether the member wishes to receive marketing materials. If checked, the member is removed from NAR's Direct Mail mailing list.  NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Stop Email	Indicates whether the member wishes to receive emails. NOTE: Only the member themselves can update this field. Changes made in GrowthZone will NOT update the preference in NRDS. Changes made in GrowthZone will NOT update the preference in NRDS.	Check to indicate Yes
Preferred Mail	Indicates where the member would prefer to receive mail.	Drop-down list	X
Preferred Publication	Where the member  prefers to receive their publication(s)	Drop-down list	X
Preferred Phone	Member’s preferred phone:	Drop-down list	X
Preferred Fax	Where the member prefers to receive faxes	Drop-down list
Home Address	The address to be used as the member''s home address. Choices available in the list are configured on the Profile tab.	Drop-down list	X
Mailing Address	The address to be used as the member's mailing address if different than the home address. Choices available are configured on the Profile tab.	Drop-down list	X
Cell	3-digit area code + 7-digit number of the member’s cell phone number. Choices available in the list are configured on the Profile tab.	3 Numeric
Home Phone	3-digit area code + 7 digit phone number for Member’s home phone number. There is no need to type in the dash ( -) when entering numbers. Choices available in the list are configured on the Profile tab.	10 Numeric
Cell	3-digit area code + 7-digit number of the member’s cell phone number. Choices available in the list are configured on the Profile tab.	10 Numeric
Fax Number	3-digit area code + 7 digit number for member’s personal fax number. Choices available in the list are configured on the Profile tab.	10 Numeric
Website	Internet address for member’s web page, if any.	80 Alpha
Email	Required if Member Type is R or RA. Email address for member. Choices available in the list are configured on the Profile tab.	80 Alpha	X
Additional Information
Waive Local Dues	Indicates if local dues should be waived for the member (Y/N).	Check to indicate Y
Waive State Dues	Indicates if state dues should be waived for the member (Y/N).	Check to indicate Y
Waive NAR Dues	Indicates if National dues should be waived for the member (Y/N).	Check to indicate Y
NAR Dues Paid	Date field in MMDDYYYY format for association to indicate NAR dues were paid.	8 Date
State Dues Paid	Date field in MMDDYYYY format for association to indicate State dues were paid. These two fields (NAR and State) are mainly used by associations for look-ups when processing transfers.	8 Date
Secondary Fields of Business	Numeric code that indicates member’s secondary field of business.	3 Numeric
Secondary Fields of Business	Numeric code that indicates member’s secondary field of business.	3 Numeric
Member Subclass	Used by States and Boards to exchange additional billing types for members.	Drop-down list
Member Birthdate	Member’s date of birth.	8 Date
Orientation Date	The date the member completed the association’s orientation.	8 Date
On Roster	Indicates if member wishes to appear on roster (Y/N).	1 Alpha
Previous Non Member	Indicates if the member changed their status with the association from a non-member to a member. Valid choices are Y or N	Check to indicate Y
Arbitration Ethics Pending	Flag indicating if arbitration or ethics investigation or proceedings are pending against this member.	Check to indicate Y
Reinstatement Code	Code used to indicate if member has been reinstated.	Check to indicate Y
Reinstatement Date	Date member was reinstated.	8 Date
On Roster	Indicates if member wishes to appear on roster (Y/N).	Check to indicate Y
Previous Non Member	Indicates if the member changed their status with the association from a non-member to a member. Valid choices are Y or N	1 Alpha
Occupation Name	Member’s occupation. This is used for reporting RPAC contributions on various state and federal election reports.	20 Alpha
Member Salutation	Member’s name as it appears after Dear in the greeting of a mail merge letter.	24 Alpha
MLS ID	Member’s MLS ID number.	9 Alpha
MLS Online Status	Status of member’s online MLS access.	1 Alpha
MLS Status Changed Date (read only)	Date of last online MLS status change.	8 Date
MLS Association ID	The 4-digit association ID of the member’s primary regional MLS.	4 Numeric

Search NRDS Database for an Agent

---

Best practice when working with your agents is to first search the NRDS database to verify whether a record exists for the agent. By searching the database, you ensure that there is no duplication of records. Additionally, by searching NRDS you can determine if the member is active in NRDS at another Association and they will need to add in their Association as the secondary.

1. For the desired agent, click the Real Estate tab.

   

2. Click the Search NRDS/Add Member button.

   

3. Enter search criteria. Adding more information to your search criteria can help increase the accuracy and speed of the search results that will display. You may search on any combination of fields with the exception of the First Name only, Member Office State only, and RE License only. Wildcard searches, * "begins with only", can be performed on the First Name if it is used in combination with the Last Name.
4. Click Search NRDS. If results are found, they will be displayed on screen.

• If this is a new agent (has not had a NAR membership previously), and you are the POE, no matching agent should be found. Click the Create New button to add the new agent to the NRDS database. See Add an Agent (Primary).
• If a matching agent is found in NRDS, and you are not the POE enter this agent as a secondary record. See Add an Agent - Secondary.
• If a matching agent is found in NRDS, but is inactive. Do NOT sync the agent with NRDS. You will need to go to the NRDS database and setup the agent appropriately.

NOTE: When you select a match from the search results, the following information is returned: NRDS ID First Name Middle Name Last Name Generation Member Type Member Status MLS Association ID (Regional MLS if any) Office ID Office Name Office City Office State Office Zip Primary Local Assoc ID Primary State Assoc ID

Add an Agent (Primary)

---

If you are the POE for an agent, you can add them to your database, and sync the record to NRDS.

1. Search the NRDS Database as described above. If no match is found, click the Create New radio button.

   

2. Click Sync to NRDS.
3. Click the Get NRDS Number button to generate a NRDS ID for this agent. Once a NRDS ID is generated and assigned to this agent, it cannot be changed. NOTE: The Account Number for the agent will automatically be updated to the NRDS ID if Tie Account Number To NRDS Number was enabled during the initial setup of your GrowthZone database.
4. In the NRDS section, populate the following fields. All data entered will be sent to NRDS, however, only those marked with an asterisk are required (See Agent Data sent to NRDS for detailed descriptions and formatting of the fields.):
   • Member Type*: Select this agent's member type from the list. NOTE: If the member type is R or RA you must also populate the license for this agent on the Profile tab.
   • Active Since: Indicates the date that this agent joined NRDS.
   • Local Join Date: The date the member transferred or reinstated into this current Primary association. NOTE: The field Join Date should not change when members move from association to association. Use this field to indicate that move. This cannot be a future date.
   • Status*: Select Active from the list.
   • POE Association: This field will automatically be populated with the POE Association ID for your organization.
   • License: Choose the license associated to this agent, or click the icon to add a new license.
   • Primary State*: Select the state where this member has primary membership.
   • Primary Field of Business*: Select the agent's primary field of business. NRDS approved fields of business are displayed in the list.
   • NRDS Office*: Select this agent's office from the list. All offices associated to this agent will be displayed for selection. NOTE: The office must exist in NRDS database.
5. In the Communications section, complete the following (an asterisk indicates a required field)
   • Stop Mail: Indicates whether or not to exclude active members from mailings, including the Realtor Magazine. Check the box to exclude the agent.
   • Stop Fax: Indicates whether the agent wants the fax number to be used. Check this box to indicate that the fax should not be used.
   • Stop Email: This setting indicates whether the agent wishes to be on NAR's Direct Mail mailing list. Only an agent can change this field in their record. Anything a POE sends in this field will be ignored by NRDS.
   • Stop Marketing Material: This setting indicates whether the agent wants to receive marketing materials from NRDS. Only an agent can change this. Anything the POE send in this field will be ignored by NRDS.
   • Preferred Mail: Select the address type to which the agent prefers to have mail sent. Required if agent is R or RA.
   • Preferred Publication: Select the address type to which the agent prefers to have publications sent. Required if agent is R or RA.
   • Preferred Phone Number: Select the phone number type the agent prefers to be used for phone calls.Required if agent is R or RA.
   • Preferred Fax Number: Select the fax number to which the agent prefers to receive faxes.
   • Home Address: Select the agent's home address. All addresses you have added on the Profile tab are available for selection OR click the icon to add an address. NOTE: If the agent type is R or RA, this field is required.
   • Mailing Address: If the mailing address is different than Home Address, select the mailing address. All addresses you have added on the Profile tab are available for selection OR click the icon to add an address.
   • Cell: Select the agent's cell-phone number. All phone numbers you have added on the Profile tab are available for selection OR click the icon to add a phone number.
   • Home Phone: Select the agent's home phone number. All phone numbers you have added on the Profile tab are available for selection OR click the icon to add a phone number.
   • Email: Select the primary email for this agent. All emails you have added on the Profile tab are available for selection OR click the icon to add an email. NOTE: If the Agent is R or RA the email address is required.
   • Preferred Fax: Select the fax number the agent prefers to be used. All fax numbers you have added on the Profile tab are available for selection OR click the icon to add a fax number.
   • Website: Select the agent's web-site. All web-sites you have added on the Profile tab are available for selection OR click the icon to add a web-site url.
6. Click Done.

The new agent will be synched to NRDS within 10 minutes, no further interaction is required on your part.

NOTE: When adding an agent, if NRDS finds a member record already exists with the same Member ID or License it will process the Add as a Change without the necessity of sending another record. There are two exceptions to this rule: if the Name in the add is different than the Name in the existing record, if the License in the add is different from the License in the existing record. Then NRDS will reject the record and require that the record be sent as a Change rather than an Add. Review the Event Log to ensure that there were no validation errors.

Add Agent (Primary) Additional Information

---

Additional information about your agents can be tracked in GrowthZone. This information is not required, but if populated will be synchronized to NRDS. NOTE: Only the POE can add/update additional agent information.

1. For the desired agent, click the Real Estate tab.
2. Click the in the NRDS Additional Information section. NOTE: If you are NOT the POE for this agent, you are not authorized to add/change the additional information and the will not be available.

   

3. Enter the desired information. See Agent Data sent to NRDS (Primary) for detailed descriptions of the fields.
4. Click Done. The updates will be sent to NRDS automatically with no further interaction on your part.

Change/Update an Agent (Primary)

---

If you are the POE for an agent you can change/update profile and NRDS information via GrowthZone. When Sync With NRDS is enabled on the Real Estate tab, changes to any of the fields described in Agent Data sent to NRDS (Primary) will trigger a synch to NRDS. All fields are sent, not just those that have been changed.

NOTE: NRDS will not process a change on an inactive member (Status of Inactive, Terminated or Deceased). If you want to change the agent’s record you must first change the member back to active or provisional within the NRDS database.

Change an Agent's NRDS Status (Primary)

---

An agent's status can be updated within GrowthZone, and synchronized to NRDS. Agent statuses include:

• Active
• Inactive indicates that the member left voluntarily, in good standing. They may have decided not to renew their membership or may have simply resigned or retired from the business.
• Terminate indicates that the member was dropped because they did not meet an outstanding duty or obligation. This includes an unfulfilled code of ethics violation, hearing, outstanding arbitration obligation or not taking the COE course. In other words, this member did not leave in good standing. Choosing to simply not renew their membership would not fit in this category.
• Suspend was added to NRDS for the specific purpose of tracking members who had not taken their COE course by December 31 of each quadrennial. If a member does not take the COE course by December 31, 2012 the association must suspend that member, and by March 1 must terminate the member if they have not taken the course. Therefore there should be no members with status S in NRDS after March 1.
• Provisional status is available for associations who have adopted the Provisional bylaw. It allows you to enter a member into NRDS with a Member Type of REALTOR®/REALTOR® Associate and a Status of Provisional even before they have met all the requirements for orientation, etc. NAR will provide all services to these members (magazines, realtor.org, etc.) as they are considered REALTORS®/REALTOR® Associates with all rights and privileges.

Any update to the agent's status will trigger a CHANGE transaction to NRDS. To update an agent's NRDS status:

1. Select the agent's Real Estate tab.

   

2. Click the in the NRDS Information section. NOTE: If you are NOT the POE for this agent, you are not authorized to change this information and the will not be available.

   

3. Ensure that Sync With NRDS check-box is selected.
4. Select the desired Status from the list.
5. Click Done.

Once you have saved, a change transaction is triggered. All fields described in Agent Data sent to NRDS (Primary) will be sent to NRDS within ten minutes, no additional interaction is required on your part.

Move an Agent to a New Office

---

Within your software, you will be able to easily move an agent from one office to another. To ensure that NRDS is appropriately updated, please perform the steps in the following order:

1. If the agent you are moving to a new office is the Office DR, update the Office DR on the Office's Real Estate Tab. NOTE: You must be the POE to update this information.
2. Add the Agent to the New Office. See
3. On the Agent's Real Estate tab, update the agent's office. NOTE: You will only be able to do this if you are the POE.
4. Remove the Agent from the previous office.
5. For the desired agent, click the Profile tab.

   

6. For the office you wish to remove, click the icon in the Offices section.

   

7. Deselect the Active check-box.
8. Click Done.
9. To add the new office, click the icon in the Offices section.

   

10. Enter the name of the new office, and complete all necessary fields.
11. Click Done.

Update NRDS with New Office' Only if you are the POE will you be able to update NRDS with the new office information. If sub-queue processing is not enabled, when a POE updates information, your data will NOT be updated.

1. For the desired agent, click the Real Estate tab.
2. Click the in the NRDS Information section.
3. Select the desired office from the NRDS Office ID list.
4. Click Done.

Secondary Agent Records

---

The Agent Secondary record is used to store supplemental, or secondary records for a member. A member is in NRDS only once with one NRDS ID but you can link many secondary records to one member. The secondary record is used to indicate a member’s secondary associations, secondary offices, secondary licenses, etc. The Secondary record allows you to define additional relationships this agent may have to other offices, within an office, or other associations. There is no limit on the number of supplemental records attached to a member. Best practice when adding a secondary record, if the secondary record in NOT a secondary record for an agent for which you are POE, is to search NRDS to bring back data from NRDS for the record.

Data Sent to NRDS for Secondary Agent Records

---

The information below is sent to NRDS for secondary records. During synchronization All information is sent, but note the fields that are required. The data you enter will be dependent on the type of secondary record you are sending.

Field Name	Description	Data format	Required
Real Estate Tab
NRDS ID	The member's unique 9-digit NRDS ID. The member must exist in NRDS and be an active member in order to add a secondary record.	9 Numeric	X
Office ID	Required. The Supplemental record is used to indicate any other Offices where a member works in addition to the ‘core’ Office in the Member record. If you are using this Supplemental record to indicate a member’s Secondary association, additional License, etc. and the Office is still the same as the one in their core Member record, select the same office id from the list. If you are using this Supplemental record to indicate another Office where this member is affiliated, enter the other office ID. All offices to which the agent is associated in your GrowthZone database will be available for selection.	9 Numeric	X
Type	Required. Use this Supplemental record to indicate that the member has a different Member Type (usually in another Office or another Association). If you are using this Supplemental record to indicate Secondary associations, secondary offices, etc. and the Member Type is still the same as in the member’s core Member record, enter the same Member Type here.	4 Alpha	X
License	The Secondary record can be used to indicate that the member has a different License Number (usually in another Office or another Association). You will be able to select a license from the list, or add a new license on the fly.	Drop-down Choice
Status	Required. Use this field to indicate the Status of the Secondary record. For example, you set up a supplemental record to indicate the member worked at another Office. When that is no longer true, you would set the Status of this record to I (Inactive). Again, this Status relates ONLY to this particular secondary record	1 Alpha	X
Member Subclass	Used in conjunction with Member Type by many associations. Again, you would use this in the same manner as Member Type to indicate supplemental information.	4 Alpha
Local Join Date	If using this record to add on a Secondary Association to the member, enter the date that the member joined this secondary association.	8 Date
Billing Discount	Used in conjunction with the Realtor Electronic Commerce Network - Dues Billing module. The EC Invoice allows an association to set up a discount applicable to members of a certain group. For this supplemental record attached to this member at this association, enter Y if the member is in that special discount group.	1 Alpha

Add a Secondary Agent Record

---

The approach used to add a secondary record will depend on whether the agent currently exists in your GrowthZone database, with a valid NRDS ID.

The agent already has a NRDS ID in your database:

---

1. On the agent's Real Estate tab, click the icon in the Secondary Member(s) section.

   

2. Click Sync to NRDS.
3. Enter the NRDS information. The fields indicated by an asterisk are required for a secondary (supplemental) record. See Data Sent to NRDS for Secondary Records for further information about these fields.
   • NRDS Status*: Use this field to indicate the Status of the Supplemental Record.
   • Office NRDS ID*: Select the Office NRDS ID, from the list, for the agent's secondary record. All offices to which this agent is associated will be displayed for selection.
   • Status: Select the desired member status, for this agent as it applies to the secondary record.
   • Member Type: Select the desired member type, as it applies to the secondary record.
   • Member Subclass: Select the desired member subclass.
   • Local Join Date: This field can be used to indicate when this agent joined this secondary association, office, etc.
   • Billing Discount: Indicate by Yes or No whether this secondary qualifies for a billing discount.
4. Click Done. No further interaction is required on your part. The secondary record will be synced to NRDS automatically. All information described in Data Sent to NRDS for Secondary Records will be sent.

The agent does NOT have a NRDS ID in your GrowthZone database

---

1. On the agent's Real Estate tab, search NRDS for the agent as described above.
2. Click the matched contact. NOTE: If you are NOT the POE for this agent, and no match is found, you will NOT be able to add this secondary record to NRDS. You will need to determine why the agent is not already associated to his/her primary association within NRDS before you can proceed.
3. Click the icon in the Secondary Members section.
   • Click Sync to NRDS.

   

4. Enter the NRDS information. The fields indicated by an asterisk are required for a secondary (supplemental) record. See Data Sent to NRDS for Secondary Records for further information about these fields.
   • NRDS Status*: Use this field to indicate the Status of the Supplemental Record.
   • Office NRDS ID*: Select the Office NRDS ID, from the list, for the agent's secondary record. All offices to which this agent is associated will be displayed for selection.
   • Status: Select the desired member status, for this agent as it applies to the secondary record.
   • Member Type: Select the desired member type, as it applies to the secondary record.
   • Member Subclass: Select the desired member subclass.
   • Local Join Date: This field can be used to indicate when this agent joined this secondary association, office, etc.
   • Billing Discount: Indicate by Yes or No whether this secondary qualifies for a billing discount.
5. Click Done. No further interaction is required on your part. The secondary record will be synced to NRDS automatically. All information described in Data Sent to NRDS for Secondary Records will be sent.

Add Additional Secondary Agent Record(s)

---

You may add as many additional secondary records as needed.

1. On the agent's Real Estate tab, click the icon in the Secondary Member(s) section.
2. Ensure that Sync to NRDS is selected.
3. Click the icon.
4. Populate the desired fields.
5. Click Done.

The additional secondary record will be sent to NRDS with no further action needed. All information described in Data Sent to NRDS for Secondary Records will be sent.

Update a Secondary Agent Record

---

1. For the desired agent, click the Real Estate tab.
2. Click the icon in the Secondary Member(s) section.

   

3. Make the desired updates.
4. Click Done

The changes to the secondary record will be sent to NRDS with no further action needed. All information described in Data Sent to NRDS for Secondary Records will be sent.

NRDS Education Records

---

Every 4 years, in a set cycle, every Realtor and Realtor Associate must take the NAR Code of Ethics course. This Education record can be added by any POE. They do not have to have a primary or secondary relationship with the member. Because members could take an education course at any association, this is the one record that can be added by any POE to any member. GrowthZone currently provides the ability to track agent's Code of Ethics (COE) training. Synchronization of the education records is made to NRDS within 10 minutes of the addition or update of the records.

Data sent to NRDS for Code of Ethics

---

The table below describes the Code of Ethics fields that are sent to NRDS.

Field Name	Description	Format	Required
NRDS ID	The 9-digit unique member ID of the member. Note: The Member must be active (A or P) or Suspended (S).	9 Numeric	X
Education Course Code	Unique course code assigned by the sponsoring or licensing association. Once the Group Code has been selected, use this field to enter the specific course code.   COE Course: For the Code of Ethics course, this should always be COEC. If the POE is entering a new member orientation COE course, it should be COEN	Drop-down choice	X
Education Course Number	Assigned by the sponsoring or licensing Association. COE Course: If this is for a COE course, it should always be the year followed by the cycle.  If the course was in 2012 for Cycle 3, it should be 2012C3. If the course was in 2013 for Cycle 4, it should be 2013C4, etc.  Several POE reports reply on the Course Number following these standards so always be sure to use this format for the COE course.    NOTE: if entering the course for new members, using the year as the Course Number is acceptable.	15 Alpha	X
Ethics Training Date	Date course was completed. For one day courses, use this field for the course date.  COE Course: For the COE course, this should be the date they completed the course.	8 Date	X

Add/Update Code of Ethics Training

---

NOTE: The agent must have an NRDS ID and Sync to NRDS must be enabled. NRDS will not allow you to add an Education record for a member who is not active (or Suspended) in NRDS (Status A, P or S).

1. For the desired agent, click the Realtor's tab.
2. Click the icon, in the Code of Ethics section.

   

3. Click Sync to NRDS.
4. Enter the following information (an asterisk denotes a required field):
   • Training Date
   • Education Course Code*
   • Education Course Number*
   • COE Year
5. Click Done.

Your additions/updates to Code of Ethics training will be sent to NRDS within 10 minutes, with no additional interaction on your part.

Letter of Good Standing (COMING SOON)

---

Often times, Real Estate Associations need to provide a Letter of Good Standing to members for them to join an MLS. GrowthZone provides a convenient for you members to generate this document or email this information.

Customize Letter of Good Standing Documentation Template (COMING SOON)

---

Within your Document Generation Templates you will find a default template named Letter of Good Standing. This template may be used as designed, or you may customize it to suit your business processes. See Setup your Document Templates for details on customizing the Letter of Good Standing template.

Download/Print Letter of Good Standing Documentation Template (COMING SOON)

---

You can download the Letter of Good standing from the contact's record:

1. For the desired contact, click the common tasks Action button.

   

2. Click Create Letter/Document.

   

3. Select the desired Member Letter.
4. Click Download File.

Customize Letter of Good Standing email template (COMING SOON)

---

Within your Email Templates you will find a default Letter of Good Standing template. You can use this template as designed, or customize it to suit your business processes. See Create and Manage Email Templates for further information on working with email templates.

Email Letter of Good Standing (COMING SOON)

---

When sending emails, both individually or mass, this template, created above, will be available to you. See Send Emails.

NRDS Financial Record (COMING SOON)

---

GrowthZone provides the ability to sync the financial record to NRDS. The Financial record is used by Primary Local POEs, Primary State associations, as well as Secondary local and state associations to store members’ dues payment records. Other POEs can view this information online in NRDS so it can be very helpful as members transfer their primary membership for the new association to quickly check online to see if the member has paid their dues.

The POE for the member's Primary local and state as well as any secondary associations can Add Financial records for the member. There is no Change for a financial record. The POE can only add an adjusting entry to preserve the integrity of financial records.

NOTE: Some states require that their local POEs update this information in NRDS, many do not. NAR itself does not require this record nor is it used by NAR, however, you should check the bylaws for your state.

Financial Record Business Rules

---

• National dues can only be sent once a year (associations are not supposed to allow them to be paid monthly and NRDS will not accept monthly reported National dues payments), on the date they are paid. Other dues, such as state and local, can be sent monthly, quarterly, or yearly, on the date they are paid.
• GrowthZone will track if dues are paid late, and report to NRDS accordingly.
• You cannot change or delete an existing Financial record. Similar to an accounting general ledger entry, once it is posted you cannot delete it. You can only add an adjusting entry.
• The key for a Financial records, in NRDS, is the Member ID, Incurring Member ID, Payment Type, Billing Year, Dues Paid Date, Amount and Sign (ie. you can have two records with same member ID, Payment Type, Billing Year, Dues Paid Date and Amount as long as one Amount is ‘positive’ (45.00) and one is ‘negative’ (-45.00). NRDS will check for duplicates by looking at a combination of these fields.
• Adjusting Entry: to add an adjusting entry you would add a financial record with the same Member ID, Incurring Member ID, Payment Type and Billing Year as the original entry. In the Payment Amount field you would have a – (minus sign) in front of the amount you are adjusting. The Dues Paid Date can be different than or the same as the original Dues Paid Date.
• NRDS will not accept a Financial record for an inactive member. The member’s status must be A, P or S in NRDS. NRDS will also check that the Office ID is an active office in NRDS and that the member is a member of the association in the Primary Association ID field.

NRDS Financial Record - Initial Setup (COMING SOON)

---

In order for your software to identify financial records that need to be sent to NRDS, goods/services are created, then "mapped" to Financial Record settings. Currently, GrowthZone team will configure the "mapping" of your goods/services for you. In the future, you may manage these.

1. Click Setup in the left-hand navigation panel.

Review NRDS Event Log

---

Issues identified during synchronization with NRDS may be visible in the event log.

1. Click Setup in the left-hand navigation panel.
2. Click Event Log in the Miscellaneous section.
3. Click Customize Results.
4. Select NRDS Event from the Log Type list.
5. Click Done.

   

To view details of an event, click the icon.

The table below describes some of the common errors that may be logged in the Event Log.

CODE		MESSAGE TEXT	MESSAGE DESCRIPTION
3510	ERROR-CODE:3510:[%S] required when [%S] entered: ([%S]) [%S]		[%S] represents the field name. You are only sending part of a phone number, and the other part doesn’t exist in NRDS.
3521	ERROR-CODE:3521:Invalid state passed in for Street State value =: [%S]		The two-character state code must match one of the states or territories recognized in the US.
3525	ERROR-CODE:3525:[%S] length is greater than maximum length [%S] allowed.		This error will display if you are sending a field that is greater than the maximum allowed. Refer to fields sent to NRDS for correct formatting of the field.
3530	ERROR-CODE:3530:Invalid Number passed for [%S] value= [%S]		What you are passing is not a number or is not a valid value for the field (negative, etc.).
3535	ERROR-CODE:3535:Invalid date/time passed for [%S] value = [%S]		Invalid date/time passed for  <Date/Time Field Name>  value = <Date/Time Field Value>
3540	ERROR-CODE:3540:[%S] has invalid values. Value = [%S], Valid Values are [%S]		[%S] represents the field name. Refer to fields sent to NRDS for correct formatting of the field.
3555	ERROR-CODE:3555:[%S] is a Required field.		[%S] represents the field name. You have failed to send a required field.
3585	ERROR-CODE:3585:The record has changed since your last request.  Please get the most recent record.		The record has changed since your last request.  You must include the most recent Timestamp for that record which you can get from NRDS via a Query Refresh.
3590	ERROR-CODE:3590:System application error, please contact NRDS Helpline.		This usually refers to an invalid value either in the record in NRDS, or being passed as part of the transaction. See note.
3595	ERROR-CODE:3595:Invalid criteria provided <Data Field>		Invalid criteria provided <Data Field>
3774	ERROR-CODE:3774:Invalid Search Criteria:  Association Name must be at least three characters		Invalid Search Criteria:  Association Name must be at least three characters in a query.
3776	ERROR-CODE:3776:Invalid Search Criteria:  Office Name must be at least three characters		Invalid Search Criteria:  Office Name must be at least three characters in a query.
3777	ERROR-CODE:3777:Invalid Search Criteria:  First Name and/or Last Name total length must be at least three characters		Invalid Search Criteria:  First Name and/or Last Name total length must be at least three characters in a query.
3782	ERROR-CODE:3782:More than 100 matching records were found. Please search again and narrow your search criteria.		More than 100 matching records were found. Please search again and narrow your search criteria.
3785	ERROR-CODE:3785:No records found with your Search criteria		No records found with your Search criteria
3791	ERROR-CODE:3791:Invalid search criteria.  Please search on the correct fields		Invalid search criteria.  Please search on the correct fields
3797	ERROR-CODE:3797:[%S][%S] Does not exist in the NRDS System		[%S] represents the field name. <Member or Assoc><ID> Does not exist in the NRDS System
3868	ERROR-CODE:3868:The record has changed since your last request.  Please get the current record.		The record has changed since your last request.  Please get the current record.
3660	ERROR-CODE:3660:[%S] Cannot process CHANGE as TRANSFER. Primary Association mismatch. Primary Association in NRDS is [%S]		This occurs when you are trying to change a record's Primary Association ID. You must use Transfer in that case, not Change.
3500	ERROR-CODE:3500:[%S] [%S] is in the future.		[%S] represents the field name. The ONLY date that may be in the future is Orientation Date in the member record.
3505	ERROR-CODE:3505:[%S] is not a valid email address		Email addresses are assumed to follow the format of name@domain.topleveldomain
3511	ERROR-CODE:3511:Invalid phone number passed in for [%S]  Phone Number value =: [%S]		Phone numbers must be numeric and conform to the 7-digit US phone number standard.
3512	ERROR-CODE:3512:Invalid area code passed in for [%S] Area Code value =: [%S]		Area codes passed must be numeric and conform to the 3-digit US area code standard.
3705	ERROR-CODE:3705:Sender ID [%S] is not the POE for Association [%S]		You are attempting to change or add a record for which you are not the POE. This means the value in the primary association ID field does not match any association for which you are the POE.
3740	ERROR-CODE:3740:Sender [%S] is not Primary POE for the Association [%S]		You are attempting to change or add a record for which you are not the POE. This means the value in the primary association ID field does not match any association for which you are the POE.

NRDS Sub Queue Processing

---

For each association NRDS maintains a sub queue. Every add/change that occurs in NRDS that is "of interest" to the AOR, but not done by them publishes in this sub queue. At regular intervals, GrowthZone will check the sub queue and update the GrowthZone records.

"Items of interest" are as follows:

Member record: Changes are published to the POE sub queue of the member's primary and secondary local and state associations as well as any ISCs they belong to. Add Agents are published to the POE sub queue of the member's primary state association. Add Institute Affiliate Members are published to the POE sub queue of the member's primary local and state association.

Office: the changes are published to the POE sub queue of the office's primary and secondary local and state associations. Add Offices are published to the POE sub queue of the office's primary local and state association.

Education: the adds and changes are published to the POE sub queue of the member's primary and secondary local and state associations as well as any ISCs they belong to. GrowthZone currently only processes the COEC/COEN (Code of Ethics) certifications.

Member Secondary: the adds and changes are published to the POE sub queue of the member's primary local and state associations.

Office Secondary: the adds and changes are published to the POE sub queue of the office's primary local and state associations.

NOTE: GrowthZone does not currently sync Financial & Demographic transactions.

Sub-queue Processing Rules

---

The following scenarios will trigger additions to the sub queue:

• A new Agent record (Primary or Secondary) is added: The complete Agent, Agent Secondary, and Education records will be sent to the sub queue. If the member takes the COE course online at realtor.org, realtor.org will add that Education record which will then publish in the appropriate POE's sub queue.
• A new Office record (Primary or Secondary) is added: The complete Office Record and Office Secondary record will be sent to the sub queue
• Changes to an Agent, Office or Education record: The modified fields are sent to the sub queue

IMPORTANT: Contact information on the agent or office profile tab will NOT be over-written. GrowthZone will do a compare, and if it receives new data, for example an address, the new address will be appended to the record. The address would be updated for the NRDS record if applicable

Once Enable Sync - SUB Queue is turned on, no interaction is required on your part to gather changes from the sub-queue. At regular intervals, GrowthZone will check the sub-queue for updates. Each add/update from processing the NRDS SUB queue can be viewed on an agent or office Activity tab. Additionally, a report, Updates Received from NRDS is available to track what record types have come in and the office/member that is effected by the changes.You can view this via the Setup > Miscellaneous.

Office sub queue processing

---

The following sub queue updates are supported for Offices:

Add Office: If an office is added, and you are the POE, this would be published to your sub queue. Should the record already exist in GrowthZone, the office record will be updated with the information received.

Change Office: A change office will be published to your sub queue whether you are the POE or a secondary association. If the office record does not exist in your GrowthZone database, it will processed as an Add.

Drop Office: If a drop office is received via the sub queue, GrowthZone will update the office's status to I (Inactive). NOTE: If the status sent via the sub queue is T (terminated), GrowthZone will process this as a change.

IMPORTANT: Transfers are NOT processed via GrowthZone. NRDS recommends that since you must go online to NRDS to review the office first that you simply use the Transfer Office link on the NRDS admin menu. As soon as you do, the entire Office record will be published to your sub queue, and GrowthZone will be updated.

Which data is updated in GrowthZone via the sub queue is dependent on whether or not you are the POE for the office

---

If you are the POE AND the office exists in your GrowthZone database: All changed values from the record will be changed in GrowthZone. This includes any of the profile contact information, as well as the NRDS data. Sync with NRDS is left unchecked.

IMPORTANT: GrowthZone will NOT over-write existing profile information. For Example:

• An address is provided via the subqueue, GrowthZone will compare the address to an existing profile address.
• If the address is a match to an existing address, the address will not be added to the record.
• If the address does not match an existing address, GrowthZone will add the new address on the profile tab.
• If the address is tied to the NRDS record, for example, as the preferred mail or preferred publication address, this will be updated on the Real Estate tab.

If you ARE the POE and the office does NOT exist in your GrowthZone database

A new record will be added to your GrowthZone database. Sync with NRDS will not be enabled.

If you are NOT the POE and the office DOES exist in your GrowthZone database:

GrowthZone will update changed values for NRDS information ONLY. Address, phone, emails will NOT be changed on the Profile tab. NOTE: Name changes will also not be updated.

If you are NOT the POE and the office does NOT exist in your GrowthZone database (Rare)

If the office does not exist in GrowthZone, and is provided via the sub queue with a status of Active, GrowthZone will create a new record. Best practice is to NOT enter records directly into NRDS. Sync with NRDS will not be enabled.

IMPORTANT: One key update would be if the POE is updated. The AOR could be now the POE or no longer the POE (which would then put in a Secondary office). Sync with NRDS will automatically be unchecked if the POE is changed to something other than you association.

The table below describes the fields that are processed through the sub queue for offices.

---

Field Name

Office ID

Franchise ID

Parent Company ID

Office Business Name

Office Corporate Name

Street Address 1, Street Address 2, Street Attn/Care Of Street City, Street State Street Zip, Street Zip + 6 NOTE: This will become a new address in GrowthZone  if it does not already exist in the database

Mail Address, Mail Attn/Care Of, Mail City, Mail State, Mail Zip, Mail Zip + 6 This will become a new address in GrowthZone if it does not already exist in the database

Office Area Code, Office Phone This will become a new office phone number in GZ if it does not already exist in the database

Office Fax Area Code, Office Fax Number This will become a new office fax phone number in GZ if it does not already exist in the database

Office Stop Fax Flag

E-Mail Address This will become a new email address in GrowthZone if it does not already exist in the database.

Additional Phone Area Code, Additional Phone Number This will become a new phone number in GrowthZone if it does not already exist in the database.

Web Page Address This will become a new webpage in GrowthZone if it does not already exist in the database.

District

Office Type

Tax ID

Corporate License

Main Office ID

Branch Type

Billing Office ID

Office Contact-Unlicensed

Office Contact-DR

Joined Date (NAR)

Status

Status Date

On Roster

Stop Mail

NM Salesperson Count

Office Primary Indicator

MLS Online Status MLS Online status is NOT Updated

MLS Online Status Date MLS Online status is NOT Updated

Point of Entry ID

MLS ID

Primary State Code

Junk Mail Flag

Office Contact-Manager NRDS ID

Office Formal Name

Secondary office sub queue processing

---

Adds and changes for secondary offices are published to the POE sub queue of the office & member's primary local and state associations. GrowthZone will only process adds/changes for those for which the AOR is the POE.

• If the office already exists in GrowthZone, the system will add or update NRDS Secondary data.
• If the office does not exist in GrowthZone, the system will add a new Secondary record

The following data may be added or changed for secondary offices:

Field Name

Office ID

NM Salesperson count

status

status date change

Agent sub queue processing

---

Agent changes are published to the POE sub queue of the member's primary and secondary local and state associations. Add Members are published to the POE sub queue of the member's primary state association. NOTE: Adding agents, for which you are the POE, should be performed via the GrowthZone software.
How records are processed is dependent on whether you are the POE:

---

You are the POE and the agent record exists in GrowthZone

This will be processed as a change. All changed values will be updated in GrowthZone. NOTE: For items such as addresses, phone number, etc. GrowthZone will not over-write existing records. These will be appended to the agent's record.

You are the POE and the record does not exists in GrowthZone

This will be processed as an Add. GrowthZone will create a new record for the agent.

You are NOT the POE and the agent record exists in GrowthZone

This will be processed as a change, and GrowthZone will update all applicable information. NOTE: For items such as addresses, phone number, etc. GrowthZone will not over-write existing records. These will be appended to the agent's record.

One key update would be if the POE field has changed. Either the AOR becomes the POE, or is no longer the POE. If you are no longer the POE, the agent will become a secondary office record. Sync with NRDS will be disabled.

You are NOT the POE and the agent record does not exist in GrowthZone

If the agent status is active, this will be processed as an add.

The table below describes the fields that will updated for agents via sub queue processing.

---

Field Name

NRDS ID

Last Name

First Name

Middle

Suffix

Common Name

Prefix

Member Salutation

Gender

Home Street Address (Address 1, Address 2, City, State, Zip Code, Zip Code + 6.  NOTE: This will become a new address if it does not already exist in GrowthZone. GrowthZone will not over-write existing addresses.

Mailing Address (Adress 1, Address 2, City, State, Zip Code, Zip Code +6. NOTE: This will become a new address if it does not already exist in GrowthZone. GrowthZone will not over-write existing addresses.

Preferred Mail

Preferred Publication

Home Phone (area code + phone number).  NOTE: this will become a new phone number if it does not already exist in GrowthZone. GrowthZone will NOT overwrite existing phone numbers

Fax (area code + phone). NOTE: this will become a new fax number if it does not already exist in GrowthZone. GrowthZone will NOT overwrite existing phone numbers

Cell Phone (area code + phone). NOTE: this will become a new fax number if it does not already exist in GrowthZone. GrowthZone will NOT overwrite existing phone numbers

NRDS Office Id

Agent Type

Joined Date

Member Orientation Date

Member Status

Member Status Date

Previous Non Member Flag

Dues Waived Local Flag

Dues Waived State Flag

Dues Waived National Flag

License This will become a new member license in Growthzone if it does not already exist. growthzone will not overwrite existing data.

Member Birth Date

Member Local Joined Date

Stop Mail Flag

Junk Mail Flag

On Roster Flag

Member Online Status

Member Online Status Date

Member Primary State Association ID

Designations: If the following are set to Y, these designations will be populated on the Profile tab: GRI, ABR, ABRM, ALC, ARM, CCIM, CIPS, CPM, CRB, CRE, CRS, GAA, PMS, RAA, RCE, TBD1, SIOR, SRES, GREEN

Primary Field Of Business

Secondary Field Of Business1

Secondary Field Of Business2

Secondary Field Of Business3

Member Occupation Name

Point Of Entry (POE ID)

Agent Web Page NOTE: This will become a new webpage if it does not already exist in GrowthZone

NRDS Email NOTE: This will become a new member email address if it does not already exist in GrowthZone. GrowthZone will not over-write existing emails.

Agent MLS Association ID

MLS ID

Member Arbitration Ethics Pending

Stop Fax Flag

Member Reinstatement Code

Member Reinstatement Date

Member National Dues Paid Date

Member State Dues Paid Date

Member Subclass

Member Preferred Phone

Stop Email Flag

Agent Secondary Sub Queue Processing

---

Adds and changes to agent secondary records are published to the POE sub queue of the member's primary local and state associations.

Which records are processed is dependent on whether or not your Association ID matches the Association ID in the record

While NRDS may place member secondary records of agents for which you are not the POE, GrowthZone will process records that are specific to your association. Secondary records are processed by comparing Association ID, Agent NRDS ID, Office ID and Member Type.

Your Association ID matches the Association ID in the record

---

When the agent's NRDS ID is found in GrowthZone, as well as the Office ID and Member Type: all values, described in the table below, will be changed.

When the agent's NRDS ID is found in GrowthZone, but the Office ID and Member Type are NOT: If the member status is A (active), this record will be added to GrowthZone.

Your Association ID does not match the Association ID in the record

---

These records are not processed.

The table below describes the fields that will be added or updated for a secondary agent record.

Field Name

Agent NRDS ID

Association ID

Office ID

Member Type

AGENT lICENSE

aGENT sTATUS

sTATUS CHANGE DATE

SUBCLASS

LOCAL JOIN DATE

bILLING DISCOUNT FLAG

Education Records Sub Queue Processing

---

Education records are published to the POE sub queue of the member's primary and secondary local and state associations as well as any ISCs they belong to. If the member takes the COE course online at realtor.org, realtor.org will add that Education record to NRDS. This will then be published to the appropriate POE sub queue.

Education records that are updated in GrowthZone include:

• COEN (COE Continuing Education course for a new member)
• COEC (COE Continuing Education course)

Via the sub queue, GrowthZone will receive an add record for each COEC and a new record will be created. Updates to existing records will not be performed.

The data described in the table below will be added to the GrowthZone database.

Field Name

Course code

Course completion date

course number

course year

Monitoring Records Added/Updated via the Sub Queue

---

On each agent or office Activity tab, any changes will be logged. In addition, you can use the Updates Received from NRDS report to review all activity over a specific date range:

1. Click Setup in the left hand navigation panel.
2. Click Updates Received from NRDS in the Miscellaneous section.

   

3. Customize the list as needed by clicking the Customize Results button. You can customize by date range, Contact ID, NRDS ID or Tag(s). Tags here refer to the update type (Member, Member Supplemental, Education,

NAR E-Commerce

---

GrowthZone provides integration with NAR E-Commerce. Through this integration you can:

• Easily handle splits of membership dues. You will have the ability to indicate distribution parameters and NAR will send along those amounts to state and national appropriately.
• Store cards in the back office for future use and allow your members to store cards via the Info Hub.
• Setup autopay for recurring purchases on stored cards.
• Process refunds through the GrowthZone backoffice
• Handle declined charges and receive notification of card processing failures.

IMPORTANT: NAR Ecommerce has periodic maintenance windows. During these maintenance windows, payments that are made will not be accepted by the processor. GrowthZone will temporarily turn off the ability to submit payments. A message will be displayed to let you and your members know, and suggest submitting payment at another time.

NAR E-Commerce Initial Setup

---

The setup of the E-Commerce payment processing account in the GrowthZone software will be done by GrowthZone. The following pieces of information will be needed for setup:

• Association ID
• User ID
• Password
• Credit cards that you accept.

NAR E-Commerce Initial Setup - Dues Split

---

If you wish to setup dues splits, goods/services will need to be created for each share of a membership’s dues. For example, you will need a fee item called something like “Membership Dues - NAR” to account for the amount of the membership that should be sent to National. GrowthZone will assist you in the initial setup of Good/Services and in configuring the appropriate dues split.

General Setup/Process:

• Setup Good/Services for local, state, national, etc. See Setting Up Goods/Services
• Assign Goods/Services to your membership types See Add Pricing to a Membership Type
• Configure splits to state, national, association. Currently (7/2020 these settings are available to GrowthZone staff only). See below:

1. Click Setup in the left-hand navigation panel.
2. Click Real Estate Finance Settings in the Finance section.

   

3. Click the icon in the Split Settings section.
4. Select the goods/service you wish to include in the split from the Saleable Item list.
5. Select the entity to which funds should be split from the Split Association list. Options are pre-populated for National, Association (local) and States.
6. Enter your bank account numbers.
7. Repeat the steps above to add additional goods services
8. When all desired goods/services have been associated to a split, click Save.

IMPORTANT

• GrowthZone only supports splits at the time of payment. You are unable to use E-Commerce to process monthly membership payments and then send a lump sum annually to state and national.
• E-Commerce will support up to 6 destination bank accounts, if just one account is being used, the splits will not need to be configured.
• GrowthZone supports creating refunds for memberships that include splits. However, the refund will auto-debit ALL of the refunded amount from the local association. This is because NAR does not support auto-debiting other associations; it will be up to the local association to contact the others (e.g. State and Nat’l) to recoup those funds. Questions/Concerns should be directed to NAR.
• GrowthZone does not charge additional transaction fees on top of NAR’s fees. For questions about rates and fees, please contact NAR.
• There are many specific rules & regulations for E-Commerce. Please contact NAR with questions.

Update NAR Ecommerce Dues Split

---

1. Click Setup in the left-hand navigation panel.
2. Click Real Estate Finance Settings in the Finance section.

   

3. To add a new goods/service, click the icon in the Split Settings section.
4. Select the goods/service you wish to include in the split from the Saleable Item list.
5. Select the entity to which funds should be split from the Split Association list. Options are pre-populated for National, Association (local) and States.
6. Enter your bank account numbers.
7. Repeat the steps above to add additional goods services if needed
8. When all desired goods/services have been associated to a split, click Save.

NAR E-Commerce Storing Credit Cards

---

Credit cards to be used by your members can be stored from the back-office, or by your members in the Info Hub.

NAR E-Commerce Storing Credit Cards from Back Office

---

1. For the desired member, click the Billing tab.
2. Click the in the Stored Payment Profiles section.

   

3. Select the Payment Profile Type from the list.
4. Select your NAR E-Commerce Payment Gateway from the list.
5. Card Information:
   • Select Yes/No for Do you have a NRDS ID. If Yes is selected, the NRDS information for the member will be automatically populated.
   • Select the Card Type.
   • Enter required card information details.
6. Click Done.

NAR E-Commerce Storing Credit Cards from Info Hub

---

1. In the Info Hub, click My Info.
2. Click the Billing tab.

   

3. Click the + icon in the Payment Profiles section.

   

4. Card Information:
   • Select Yes/No for Do you have a NRDS ID. If Yes is selected, the NRDS information for the member will be automatically populated.
   • Select the Card Type.
   • Enter required card information details.
5. Click Done.

NAR E-Commerce Assign Store Card to Recurring Fees

---

If you or your member has stored a credit card, and you wish to assign the card to the members recurring fees, see Apply Store Cards to Recurring Fees. When generating your invoices for upcoming billing, the member's card will be automatically charged. See Manage Invoices for Upcoming Billing.

NAR E-Commerce Processing Refunds

---

If needed, you can easily process refunds from your GrowthZone software. See Refund a Payment.

IMPORTANT: Contractually, the E-commerce network will not allow one association to automatically debit the bank account of another association. For example, the ABC Local Association cannot initiate an E-Commerce transaction that is going to debit the bank account of the XYZ State Association, or the National Association. So if the original transaction sent by the local association was used to distribute dues payments among the local, state and national, the local association using this request can only debit their own bank accounts. NAR E-Commerce provides the following best practice: The original Purchase totaled $350. The distribution was $84 to National, $70 to state, and $196 to local. The local association (the original Association ID in the Purchase) could use this transaction to refund the member’s credit card the $350 total. The total will all come out of the local association’s bank. We recommend that the local contact their state and national association first to see if those two entities will agree to this refund. If they agree, then the state and national could then send an EFT transfer for the original net amount they received to the local’s bank account who could then use this transaction to refund the member’s credit card in total from the local association’s bank account. This is one way to credit the member’s credit card in whole rather than crediting the member’s credit card for just the local amount and then the local writes the member a check once the local receives the state and national dues back from those two entities.

View NAR E-Commerce Payments

---

The Payment Processing Report can be used to view payments over a selected date range. See Payment Processing Report.

IMPORTANT: The Payment Processing Report will provide you with the grand totals of your payments processed through NAR Ecommerce. You will need to use the statement received from NAR Ecommerce to find the fees for those charges, and update your accounting software appropriately.

MLS Integration

---

GrowthZone offers a data integration with various MLS Solutions. This is a push-type integration which sends changes to contact information from GrowthZone to MRED’s MLS vendor, DynaConnections. The sync happens (when there are contact info changes) around 4 times hourly between the hours of 8 am (CST) and 8pm (CST), seven days a week. The purpose of the integration to an MLS is to establish an account for the member, to establish the member's access level within the MLS (defined by the agent's Member Type, and to track the member's status.

Currently, GrowthZone integrates to MRED and Corelogic. Black Knight coming soon.

MRED Integration

---

MRED Integration - Initial Setup

---

On initial installation of your software, GrowthZone will configure the initial connection to MRED. You will then be able to manage your agent's participation in MLS from the agent's Real Estate tab. GrowthZone will sync to MRED any additions or changes made to the MLS information on this tab. Records are synchronized every hour. MRED Office and Agent Files created, are zipped into one file and sent every hour to the FTP site.

Initial setup involves providing the FTP URL, Path, User Name and Password. This information is provided by MRED.

Initial Setup Considerations:

• You have the option to enable Use Membership To Determine MLS Status. Selecting this option will automate updates to MLS status. For example, if you drop an agent, who has an active MLS status, the status will automatically be updated to Inactive. Important: this is designed to work when your members have only one membership.
• You will decide if you wish to use the MLS ID Generator. If you select this option, a "Get MLS ID" button is available to you when assigning your MLS ID's. Enabling this option will prevent duplication of IDs.

MRED - Working with Agents

---

Via GrowthZone, you can add and update agent MRED information.

Data sent to MRED for an Agent

---

The table below described the data that is sent to MRED for agents. All data is sent, not just data that has changed.

Field Name	Description	Format	Required
Initial Setup
MLS Board Number	The 3 – 4 abbreviation for the association	4 Alpha	X
Profile Tab
Last Name	The agent’s last name	50 Alpha-numeric	X
First Name	The agent’s first name	50 Alpha-numeric	X
Middle Initial	The agent’s middle name or initial	50 Alpha-numeric
Suffix	The agent’s suffix, referred to as generation in MRED	50 Alpha-numeric
Common Name	The agent’s nick-name	50 Alpha-numeric
Title	The agent’s title	50 Alpha-numeric
Home Street Number	The street number for the address marked as home	50 Alpha-numeric
Home Street Name	The street name for the address marked as home	100 Alpha-numeric
Home City	The street city for the address marked as home	50 Alpha-numeric
Home State	The state for the address marked as home	2 Alpha-numeric
Home Zip Code	The zip code for the address marked as home	10 Numeric
Home Zip + 6	The zip code + 6 for the address marked as home	6 Numeric
Home Phone	The agent’s phone – marked as home. NOTE:  You cannot have a phone without an area code or it will be rejected from MLS.	16 Alpha-numeric
Fax Number	The agent’s fax number	16 Alpha-numeric
Cell Phone	The agent’s cell phone	16 Numeric
Web-site	The web-site, marked as primary,  for this agent	50 Alpha-numeric
Email	The default email listed for this agent	80 Alpha-numeric
License	The first license number listed in the Professional Section on the Profile tab.	50 Alpha-numeric
Real Estate Tab
NRDS ID	The Agent’s unique 9 digit NRDS ID	9 Numeric
MLS Office ID	The MLS ID for this agent's office.  New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance.	25 Alpha-numeric	X
MLS Status	This agent’s MLS Status	Drop-down list	X
MLS ID	The MLS ID for this agent. '''NOTE''': New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance. Once the MLS ID is created in GrowthZone, it cannot be changed.	25 Alpha-numeric	X
Agent Type	The agent type drives the permissions the agent will have within the MLS.	Drop-down list

Add an Agent to MRED

---

IMPORTANT!If creating new agents AND a new office, the office must be created first and then the agents assigned to the office.

1. For the desired agent, verify that all contact information required to sync an agent to MRED has been populated on the Profile tab. See Data sent to MRED for an Agent for details.
2. Select the agent's Real Estate tab.

   

3. Click the icon in the MLS - MRED section.

   

4. Enter the agent's MLS ID. New MLS IDs must use MRED’s rules for creation. Please contact MRED if you need assistance. NOTE: If you have elected to enable MLS ID Generator during initial setup, a Get MLS ID button is displayed. Click the button to automatically create your MLS ID.
5. Click Done. IMPORTANT: Once the MLS ID is saved, it cannot be changed. Ensure that the number is correct prior to clicking Done.

   

6. Click the icon in the MLS Information section.

   

7. Enter the following information (an asterisk indicates a required field):
   • MLS Office ID*: Enter the MLS ID for this agent's office.
   • MLS Join Date: Enter the date this agent became active with MRED.
   • MLS Status*: Select Active from the drop-down list. NOTE: By default, the MLS Status is NOT tied to the agent's GrowthZone membership status. If, during initial setup of the integration to MRED you have enabled Use Membership To Determine MLS Status, a change to the GrowthZone membership status will update the MLS status.
   • Agent Type*: Select the appropriate agent type for this agent. The agent type drives the security role giving/restricting access the agent will have within the MLS. Agent Type is sometimes referred to as "class" .
   • Term Date: Applicable when de-activating a member.
8. Click Done.

Change MRED Agent Data

---

1. Select the agent's Real Estate tab.

   

2. Click the icon in the MLS Information section.

   

3. Make desired changes to the agent data.
4. Click Done.

Change MRED Agent Status

---

1. Select the agent's Real Estate tab.

   

2. Click the icon in the MLS Information section.

   

3. Ensure that Sync with MLS is enabled.
4. Select the desired status from the MLS Status list.
5. (Optional) If you are inactivating an agent, enter the Term Date.
6. Click Save.

NOTE: From MRED's point of view, there is no functional difference between Inactive, Terminated, Suspended; the member is denied access.

MRED - Working with Offices

---

Data sent to MRED for an Office

---

The table below describes the data that is sent to MRED for an office. Ensure that all fields are formatted appropriately, and required fields are populated.

Field Name	Description	Format	Required
Profile Tab
Name	Office Business Name	50 Alpha	X
Address 1	Street Number (20 max) and street name (100 max) for the first address that is marked as mailing or physical and mailing.  Must include a street number	120  Alpha	X
Address 2 (see above)	Office Address Line 2	100 Alpha
City (see above)	Street City	50 Alpha	X
State (see above)	Street State	2 Alpha	X
Postal Code (see above)	5 digit Street ZIP	10 Num	X
Postal Code (see above)	Street ZIP+6	6 Num
Phone number	Office Phone Number. NOTE: You cannot have a phone without an area code or it will be rejected from MLS	16 Alpha
Email Address	Office E-Mail Address	80 Alpha
Real Estate Tab
NRDS ID	The office’s 9 digit unique NRDS ID	9 Numeric
MLS ID	Office Tax ID. This is NEVER the same as a NRDS ID	20 Alpha
MLS Status	The office’s MLS status	Drop-down list	X
Office License Number	This is the license number for the office from the State.
MLS Join Date	The date the office began with the MLS	8 Date
MLS Term Date	Date of termination of agent/office with MLS provider	8 Date

MRED - Add an Office

---

1. Click the office Real Estate tab.

   

2. Click the icon in the MLS - MRED section.

   

3. Enter the MLS ID for this office. IMPORTANT: Once you click Done you will not be able to edit the ID.
4. Click Done.

   

5. Click the icon in the MLS Information section.

   

6. Click Sync with MLS.
7. Complete the following information, an asterisk indicates a required field. Refer to for details descriptions of the fields:
   • MLS Office ID*: The MLS ID for this office.
   • MLS Status*: Select Active from the list.
   • Join Date: Enter the date this office joined MRED.
   • Office License Number: Enter the license number, issued by the state, for this office.
   • Broker Reciprocity: Enable this check-box if the office participated in broker reciprocity.
8. Click Done.

The information listed in Data sent to MRED for an Office will automatically be sent to MRED, with no further interaction on your part.

MRED - Change Office Data

---

1. For the desired office, click the Real Estate tab.

   

2. Click the icon in the MLS Information section.

   

3. Ensure that Sync with MLS is selected.
4. Make the desired changes.
5. Click Done.

When data for an office is changed, all data listed in Data sent to MRED for an Office is sent to MRED, not just the changed data. A record will be rejected if any of the required fields are missing or data is malformed.

MRED - Change Office MLS Status

---

When an office is inactive, suspended or terminated, you can update the information in GrowthZone and this will be synched to MRED.

IMPORTANT: If, during initial setup of MRED integration, you have enabled Use Membership To Determine MLS Status, the status of an office will automatically update to inactive when a member is dropped and vice versa.

1. For the desired office, click the Real Estate tab.

   

2. Click the icon in the MLS Information section.

   

3. Ensure that Sync with MLS is selected.
4. Select the desired MLS Status. NOTE: From MRED's point of view, there is no functional difference between Inactive, Terminated, Suspended; the office is denied access.
5. Click Done.

The changes will automatically be sent to MRED. All data listed in Data sent to MRED for an Office is sent to MRED, not just the changed data. A record will be rejected if any of the required fields are missing or data is malformed.

Corelogic Matrix Integration

---

CoreLogic's Matrix MLS is an MLS system that is a leader in this space. With GrowthZone integration you will be able to setup new agents in the MLS as well as manage the agent's security access to the system. Upon initial installation of the system custom fields will be created for agent and office security levels.

Corelogic Matrix Integration - Initial Setup

---

GrowthZone's team will configure the initial integration to CoreLogic Matrix.

Considerations:

• You can elect to use a member's status as the MLS status. For example: If this option is selected, and you drop a member, the MLS status will automatically be updated to Inactive. NOTE: This only functions when a member has one and only one membership.
• You must define the security access levels provided to your agents/offices. These should be the same security permission sets that you have setup within CoreLogic.

Corelogic Matrix - Working with Agents

---

Corelogic Matrix - Add an Agent

---

Adding a new agent to Corelogic is a two step process. First, you will assign an MLS ID, then you will provide the required information and sync.

1. For the desired agent, ensure that all required contact information has been populated on the Profile tab. Refer to Data sent to Matrix for Agents for details.
2. Click the agent's Real Estate tab.
3. Ensure that a NRDS ID exists for this agent.
4. Click the icon in the MLS - Corelogic section.

   

5. Enter the desired MLS ID. IMPORTANT: Once you enter and save the MLS ID you will not be able to change it.
6. Click Done.
7. Click the icon in the MLS Information section.

   

8. Click Sync With MLS.
9. Populate the following information. An asterisk denotes a required field. Refer to Data sent to Matrix for detailed descriptions.
   • MLS Office ID: This is the ID that the office for this agent is known by publicly
   • MLS Join Date: The date this agent joined the MLS.
   • MLS Status: Select this agent's status.
   • MLS Password: You will set an initial password for the agent. The agent will be able to change this afterwards.
   • MUC: Select this agent's security level. The security levels available are those that you provided to GrowthZone on initial setup of your database.
10. Click Done.

The new agent will synchronized to Matrix with no further interaction on your part.

Corelogic Matrix - Update an Agent

---

Basic contact information is stored by Corelogic Matrix. If any changes are made to the data sent to Matrix is changed in GrowthZone, and Sync with MLS is enabled on the Real Estate tab, these changes will be automatically sent to Matrix with no interaction on your part. Changes to any of the data listed in Data sent to Matrix for Agents will trigger a change to be sent to Corelogic.

Corelogic Matrix - Change an Agent's status

---

1. For the desired agent, click the Real Estate tab.

   

2. Click the in the MLS Information section.

   

3. Select the desired status from the MLS Status list.
4. Click Done.

The change will be sent to Corelogic Matrix automatically, no further interaction is needed. NOTE: All information described in Data sent to Matrix for Agents is sent, not just what was changed.

Corelogic Matrix - Change an Agent's Security Level

---

1. For the desired agent, click the Real Estate tab.

   

2. Click the in the MLS Information section.

   

3. Select the desired security level from the MUC list.
4. Click Done.

The change will be sent to Corelogic Matrix automatically, no further interaction is needed. NOTE: All information described in Data sent to Matrix for Agents is sent, not just what was changed.

Data sent to Corelogic Matrix for Agents

---

The table below describes the information that is sent to Corelogic Matrix for Agents.

Field Name	Description	Format	Required
Profile Tab
Prefix	The agent’s prefix
Suffix	The agent’s suffix
First Name	The agent’s first name	50 Alpha	X
Prefix	The agent’s prefix
Last Name	The agent’s last name	50 Alpha	X
Middle	The agent’s middle name	50 Alpha
Common Name	The agent’s nickname
First Name + Middle + Last Name	The agent’s display name	150 Alpha
Address 1	The agent’s Address 1 (the first record marked as Home)	50 Alpha Numeric
Address 2	The agent’s Address 2  (the first record marked as Home)	50 Alpha Numeric
City	The city for the agent’s address (the first record marked as Home)	50 Alpha
Postal Code	Postal code for the agent’s address (first record marked as Home)	10 Alpha Numeric
Postal Code +4 (Home)	The A ZIP + 4 code uses the basic five-digit code plus an additional four digits	14 Alpha Numeric
Fax	Agent’s fax number	16 Alpha Numeric
Phone (Home)	Agent’s phone. First one marked as home	16 Alpha Numeric
Phone (Cell)	Agent’s phone marked as cell	16 Alpha Numeric
Phone  (Default)	Agent’s phone marked as default	16 Alpha Numeric
Social Media Web Site	Agent's social site. The first one marked as social	255 Alpha Numeric
Email (primary/default)	Agent’s email marked as primary/default	80 Alpha Numeric
License	Agent’s real estate license number. The first license entered into the Professional section on the Profile tab	50 Alpha Numeric
Licensing Authority	The state the agent’s license is with	2 Alpha
Real Estate Tab
NRDS ID	The agent’s NRDS ID	25 Numeric
MLS Password	The agent’s MLS password
MUC	MUC defines the Member MLS  Security Class (security) level for this agent. The options available for selection are defined during initial setup of the software.	Drop-down choice	X
MLS Office ID	This is the ID that the OFFICE for this is known by publicly	25 Alpha Numeric	X
MLS Status	The agent’s MLS Status: Active Inactive Suspended Terminated	Drop-down choice	X

Corelogic Matrix - Working with Offices

---

Through your integration with Corelogic-Matrix, you will be able to add offices, update those office, and de-activate offices. The integration between Corelogic and GrowthZone is an API call that occurs every 5 minutes.

Data Sent to Corelogic Matrix for Offices

---

The table below describes the information that is sent to Corelogic Matrix. If offices are added, or changes are made to existing offices, all data is sent, not just those that have changed. The integration between Corelogic and GrowthZone is an API call that occurs every 5 minutes.

Field Name	Description	Data format	Required
Profile Tab
Name	The Office Name	Alpha-numeric 255	X
Address 1	Office address 1 marked as default	Alpha-numeric 50
Address 2	Office address 2 marked as default	Alpha-numeric 50
City	City for Office address 1 marked as default
State	State for Office address 1 marked as default	Choice
Postal Code	Postal Code for Office address 1 marked as default	Alpha-numeric 10
Phone	The phone number marked as default for the Office	Alpha-numeric 16	X
Phone number Fax	The phone number marked as fax for the office	Alpha-numeric 16
Email Address	The email address set as default for this Office	Alpha-numeric 80
Web Address	This office’s primary social site. The first one marked as social will be sent	Alpha-numeric 255
More Info Tab
Notes	Any notes that you have added on the More Info tab	Alpha-numeric 500
Realtor Tab
MLS ID	The MLS ID for this office	Alpha-numeric 25	X
NRDS ID	The 9 digit unique NRDS ID for this office	Numeric 9
MLS Office ID	Used to indicate Parent MLS ID for this office (headquarters)	Alpha-numeric 25	X
MLS Status	The Status of this Office	Drop-down Choice Active Inactive Suspended Terminated	X
Office Broker MLS ID	The MLS ID for this Office’s Broker	Alpha-numeric 25
Office Manager MLS ID	The MLS ID for the Office Manager for this Office. This may be multiple.	Alpha-numeric 25
MLS IDX Office Participation	This field indicates whether the office participated in Internet Data Display, which allows brokers to exchange consent to display one another's property listings on the Internet.	Y/N

Corelogic Matrix - Add an Office

---

1. For the desired office, select the Real Estate tab.
2. Click the orange pencil in the MLS - Corelogic section.

   

3. Enter the MLS ID for this office. IMPORTANT: Once you have entered, and clicked Done you will not be able to change the ID.
4. Click Done.
5. Click the orange pencil in the MLS Information section.

   

6. Click Sync With MLS.
7. Enter the required information, indicated by a red bar on the right side of the field. See Data Sent to Corelogic-Matrix for Offices for further descriptions of the fields.
8. Click Done.

The new office record will be sent to Corelogic Matrix automatically when the record is saved, no further interaction is required on your part.

Corelogic Matrix - Update an Office Record

---

If Sync with MLS is enabled for the office, a change to any of the information listed in Data Sent to Corelogic-Matrix for Offices will automatically be sent to Corelogic Matrix.

Corelogic Matrix - Inactivate an Office

---

1. For the desired office, select the Real Estate tab.
2. Click the orange pencil in the MLS Information section.
3. Ensure that Sync With MLS is enabled.

   

4. Select Inactive from the Status list.
5. Click Done.

The status of the office will automatically be sent to Corelogic Matrix with no further interaction on your part.

California Regional MLS (CRMLS)

---

The California Regional MLS (CRMLS) is focused on making it possible for all California real estate information to be accessible in one or more databases. By integration with your GrowthZone software, you will be able to add and manage your agents and offices. CRMLS Office and Agent Files are created, zipped into one file and sent every hour to FTP site. All data is sent for the record, not just updated values since virtually all fields are required.

CRMLS - Working with Offices

---

By integrating your GrowthZone software you will be able to activate offices, update office information, and de-activate offices in CRMLS.

Activate an Office in CRMLS

---

Adding an office to CRMLS is a two step process. First you will assign an MLS ID, then you will activate the sync.

1. For the desired office, click the Real Estate tab.
2. Click the icon in the MLS - CRMLS section.

   

3. Enter the MLS ID for this office. If, during initial setup, you have chosen to use the MLS ID Generator, click the Get MLS ID button.
4. Click Done. IMPORTANT: Once you click Done you will not be able to edit the ID.
5. Click the icon in the MLS Information section.

   

6. Enable Sync with MLS.
7. Select the office Status.
8. Click Done.

The new office will be synced, within the hour, to CRMLS with no further interaction on your part.

Update an Office in CRMLS

---

As long at Enable Sync to MLS is selected, any changes made to the date described in Data sent for Offices to CRMSL will result in an update being sent to CRMLS.

EXCEPTION: Phone Number Fields, E-mail field, and Password field are only updated at CRMLS on the first time sent. After that, no changes are sent since they do not get updated at CRMLS.

De-activate an Office in CRMLS

---

1. For the desired office, click the Real Estate tab.
2. Click the icon in the MLS Information section.

   

3. Ensure that Sync with MLS is checked.
4. Select Inactive from the Status list.
5. Click Done.

The status will be synced, within the hour, to CRMLS with no further interaction on your part.

Data sent to CRMLS for Offices

---

The table below describes the data sent to CRMSL for offices. Note the only required field is the MLS ID, but all information will be sent.

Field Name	Description	Data format	Required
Profile Tab
Name	Office Name	30 Alpha
Address 1	Office address 1, marked as default. First 30 characters will be sent	30 Alpha
Address 2	Office address 2, marked as default. First 30 characters will be sent	30 Alpha
City	City of office address marked as default. First 21 characters will be sent.	21 Alpha
State	State of office address marked as default.	2 Alpha
Postal Code	Zip code for the office address marked as default. First 5 characters will be sent.	5 Alpha
Phone	Office phone number marked as default area code & 7 digit phone number are sent	3 Alpha
Phone (Fax)	Office fax number, area code and 7 digit number will be sent	10 Alpha
Email	Office email address marked as default	80 Alpha
Web-site	Office web-site, first one marked social	80 Alpha
Real Estate Tab
MLS ID	Office MLS ID – 10 characters only	10 Alpha	X
Status	Office MLS Status	Choice

CRMLS - Working with Agents

---

By integrating your GrowthZone software you will be able to activate agents, update agent information, and de-activate agents in CRMLS.

Activate an Agent in CRMLS

---

Activating an agent in CRMLS is a two step process. First you will assign an MLS ID, then you will set the Sync to MLS and provide required information.

1. For the desired agent, click the Real Estate tab.

   

2. Click the in the MLS - CRMLS section.

   

3. If, during initial setup, you have chosen to use the MLS ID generator, click Get MLS ID. Or, enter your custom MLS ID.
4. Click Done.

   

5. Click the in the MLS Information section.
6. Enable Sync with MLS. NOTE: If no MLS ID is configured for this agent, you will not be able to proceed. See step 2 above.

   

7. Enter required Information fields:
   • MLS Office ID: The MLS ID for this agent's office.
   • Status: Select Active from the drop-down list.
   • Agent Type: Select the agent type. Options in the list are configured during initial setup of the database.
   • User Class: Select this agent's User Class. Items in the list are configured during initial setup of the database.
8. Enter the required Login fields:
   • Login: This is the agent's Public ID (user name).
   • Password: This is the agent's Private ID. This is only required if you wish to maintain your existing workflow of setting the initial password for members. The agent will be prompted to change this password on first login.
9. Click Done.

The new agent record will be sent to CRMLS within the hour with no further interaction on your part.

Update an Agent in CRMLS

---

If Sync to MLS is enabled, when any of the data listed in Data sent to CRMLS for Agents is changed, these changes are automatically sent to CRMLS with no further interaction on your part. This includes any changes to contact information as well as changes to the MLS data.

De-activate an Agent in CRMLS

---

1. For the desired agent, click the Real Estate tab.
2. Click the in the MLS Information section.

   

3. Ensure that Sync with MLS is enabled.
4. Select Inactive from the Status list.
5. Click Done.

The agent's status will be sent to CRMLS within the hour with no further interaction on your part.

Data sent to CRMLS for Agents

---

The table below describes the information sent, via file hourly, to CRMLS for agents.

Field Name	Description	Data format	Required
Profile Tab
Last Name	Agent last name, first 30 characters	30 Alpha
First Name	Agent first name, first 12 characters	12 Alpha
Address 1 (Default)	Agent default address line 1. First 30 characters will be sent.	30 Alpha
Address 2	Agent default address line 2. First 30 characters will be sent	30 Alpha
City	Agent default address city. First 21 characters will be sent	21 Alpha
State	Agent default address state	2 Alpha
Zip Code	Agent address zip code,	5 Alpha
Phone (Home)	Agent home phone (area code and number). This will only update in CRMLS the first time an update is sent. Anything sent after that will not update.	10 Alpha
Phone (Fax)	Agent fax number (area code and number). This will only update in CRMLS the first time an update is sent. Anything sent after that will not update.	10 Alpha
Phone (Cell)	Agent cell number (area code and number). This will only update in CRMLS the first time an update is sent. Anything sent after that will not update.	10 Alpha
Web Address (Social)	The agent’s web address, marked as social	80 Alpha
Email	The agent’s email address. This will only update in CRMLS the first time data is sent. Anything sent after that will not update.	80 Alpha
Real Estate tab
MLS Office ID	The MLS ID of the agent’s office.  (Office Preference ID in CRMLS)	9 Alpha	X
Agent Type	Types provided on initial installation of the software.	4 Alpha
Member State License	The agent’s license number	11 Alpha
Member Status	This agent’s status	Select from list
MLS Login (15 characters ONLY)	The agent’s login name (public ID)	15 Alpha	X
MLS Password	The agent’s password. Only required for inserts if the you wish to set the initial password for your agents. Upon first login, the agent will be forced to create a new password	12 Alpha	X
User Class	Predefined user classes, provided during installation of the software: AG - Agent AN - Agent Limited HA - Agent Unbilled Duplicate DB - Broker DN - Broker Limited HB - Broker Unbilled Duplicate OM - Office Manager ON - Office Manager Limited HM - Office Manager Unbilled Duplicate OA - Office Assistant PA - Personal Assistant AP - Appraiser PH - Photographer AF - Affiliate !M - Assocation Staff !N - Association Admin	Drop-down list	X
NRDS ID	The agent’s NRDS ID	11 Alpha

Black Knight - Paragon MLS

---

Black Knight's Paragon system is a nationwide MLS portal. By integration with GrowthZone additions and updates of agents and offices are seamlessly sent to Black Knight. GrowthZone will send a zipped file to Paragon every hour.

Paragon Initial Setup

---

GrowthZone will assist you with the initial setup and integration to Paragon. Following are considerations:

• Have you populated all the necessary Primary User Boards?
• Have you populated all Organization Types?
• Will you use the MLS ID Generator?

Paragon Synchronization Timing

---

Hourly a file with additions and changes are sent to Paragon's FTP site.

Paragon - Working with Offices

---

Paragon - Activate an Office

---

1. Click the Real Estate tab for the office.
2. Click the icon in the MLS - Black Knight section.

   

3. Enter the MLS ID for this office OR if you have chosen, during initial setup, to use the MLS ID Generator, click the Get MLS ID.
4. Click Done. IMPORTANT: ensure that the MLS ID is accurate, you will NOT be able to change this after clicking Done.
5. Click the icon in the MLS Information section.

   

6. Click Sync with MLS.
7. Select the office Status = Yes
8. Select the Office Type from the list. Office types available are those that you configured during initial setup.
9. Enter the MLS Office ID. This can be left blank if this is the main office or a stand alone office. If this is a Branch then this would be the Main office MLS ID.
10. Enter the MLS Office Broker ID (The user code for the office broker).
11. Indicate by checking the box, if this office is a Board Member.
12. Indicate by checking the box, if this member should be included on rosters and mailing lists.
13. Click Done.

The record will be synced to Paragon within the hour with no further interaction on your part. All data described in Paragon - Data Sent for Offices will be sent.

Black Knight - Paragon Update an Office record

---

When changes are made to the data described in Paragon - Data Sent for Offices, these changes will be automatically sent to Paragon. All date will be sent, not just what you have changed.

Paragon - Inactivate an Office

---

1. For the desired office, click the Real Estate tab.

   

2. Click the icon in the MLS Information section.

   

3. Ensure Sync with MLS is selected.
4. Change the Status to Inactive.
5. Click Done.

The record will be synced to Paragon within the hour with no further interaction on your part. All data described in Paragon - Data Sent for Offices will be sent.

Paragon - Data Sent for Offices

---

The table below describes the data that is sent to Paragon for offices. When an office is added, or a change is made to an office ALL fields are sent, not just those that have been changed. To ensure appropriate updates in Paragon, be certain all required fields are populated, and all fields are formatted properly.

Field	Description	Data format	Required
Profile Tab
Name	The office name	100	X
Address 1	Default Address 1 for this office	30	X
Address 2	Default Address 2 for this office	30
City	Default Address City for this office	21	X
State	Default Address State for this office. Standard State Abbreviations	2	X
Postal Code	Default Address Zip/Postal Code for this office	20	X
Mailing Address 1	Mailing Address 1	50
Mailing Address 2	Mailing Address 2	50
City	Mailing Address City	50
State	Mailing Address State. Standard State Abbreviations	2
Postal Code	Mailing Address Zip/Postal Code	20
Phone (Default)	The office default phone number	10
Phone (Fax)	The office fax	10
Phone (Other)	The office phone (other)	10
Email	The office email	50
Web Address	The web address for this office, the first one marked as social	80
Real Estate Tab
Office Type	The office organization type. Your association will customize the list of types during initial setup.	Drop-down choice	X
MLS ID	The office MLS ID	10	X
Status	Status of this office in MLS.	Y or N	X
NRDS ID	The 9 digit NRDS ID for this office	9
Office Broker MLS ID	This is the MLS Id for the Office Broker	25
MLS Office ID	Null if this is the main office; If this is a Branch then this would be the Main office MLS ID; Null if this is a standalone office.	25
Member of Board	Indicates whether this office is member of board	Y/N or Null
Include in Mailing Lists	Indicates whether this office should be included in mailing lists	Y/N or Null
Include in Rosters	Indicates whether this office should be included in rosters	Y/N or Null

Paragon - Working with Agents

---

Through you integration with Paragon, you will be able to activate agents, changes agents data, and de-activate those agents.

Paragon - Add an Agent

---

Prior to adding an agent to Paragon, verify that you have all of the required information for the agent on the Profile tab. Refer to Paragon - Data Sent to Agents for details.

1. Select the agent's Real Estate tab.
2. Click the in the MLS - BlackKnight section.

   

3. If you are using the MLS ID generator, click Get MLS ID, this will automatically populate the ID OR enter the MLS ID.
4. Click Done. IMPORTANT: Once you save the MLS ID, you will NOT be able to change it. Ensure that you have entered the number correctly prior to clicking Done.
5. Click the in the MLS Information section.

   

6. Click Sync with MLS.
7. Populate the required information. Refer to Paragon - Data Sent to Agents for details.
8. Click Done.

Paragon - Update an Agent

---

Any updates made to the date described in Paragon - Data Sent to Agents will be sent to the MLS. A file is delivered every hour.

Black Knight Paragon - De-activate an Agent

---

1. Select the agent's Real Estate tab.
2. Click the in the MLS Information section.

   

3. Ensure Sync with MLS is enabled.
4. Select Inactive from the Status list.
5. Click Done.

All information described in Paragon - Data Sent to Agents will be sent within the hour with no further interaction on your part.

Paragon - Data Sent for Agents

---

The table below describes the data that is sent to Black Night. Files are sent to Black Knight's FTP site hourly.

Field Name	Description	Format	Required
Profile Tab
First Name	The agent’s first name. The first 50 characters are sent.	50	X
Middle	The agent’s middle name	50
Last Name	The agent’s last name. The first 50 characters are sent.	50	X
Common Name	The agent’s nickname or salutation	50
Physical Address	Physical Address 1	100	X
Physical Additional Address	Physical Address 2	50
Physical City	Physical Address City	50	X
Physical State	Physical Address State	2	X
Physical Zip	Physical Address Zip Code	20	X
Mailing Address (Mailing)	Mailing Address 1	100
Mailing Additional Address	Mailing Address 2	50
Mailing City	Mailing Address City	50
Mailing State	Mailing Address State	2
Mailing Zip	Mailing Address Zip Code	20
Office Phone Number	The agent’s office phone number	30
Home Phone Number	The agent’s office home number	30
Fax Phone Number	The agent’s fax number	30
Cell Phone Number	The agent’s cell phone number	30
Other Phone Number	The agent’s other phone number	30
Email	The agent’s email address
WebAddress (Social)	The agent’s social web address	80
Real Estate Tab
Status	Indicates the status of this agent in the MLS: Active Inactive Terminated	Drop-down choice	X
MLS ID	The agent’s MLS ID	25	X
MLS Login	The agent’s MLS Login. This is not updateable after it is set. If we send a different Login Name it will create a new record in Paragon.	20	X
Security Level	The Agent’s permission level in Black Knight. This is defined by the agen’t MSL User Class. NOTE: If the agent is not active, Paragon will automatically set this to 0.	1	X
Office MLS ID	This is the MLS Office ID for the office to which this agent is associated.	25	X
MLS Agent Type	This agent’s MLS Type. These types are created in Paragon. On installation of the software these are populated under setup.	Drop-down choice	X
MLS Status	This agent’s MLS status. These are defined by Paragon: A – Affiliate B - Board ONLY C – Commercial F -Staff M - MLS and Board N – Nonmember S - MLS Only	Drop-down choice	X
Include in Mailing Lists	Indicates whether this agent should be included in mailing lists	Check-box
Include in Rosters	Indicates whether this agent should be included in rosters	Check-box
MLS License	This agent’s MLS License	25
Primary User Board	The agent’s primary user board. This list is customizable by you on installation of the software	20
Real Estate tab – NRDS Info
Member BirthDate	This agent’s birth date. This is set under NRDS Additional Information.	10
NRDS ID	This agent’s unique 9 digit NRDS ID	9

MLS - Standard Integration

---

A standard integration can be configured for other types of MLS Systems. As of this writing (July 2020) the following MLS are supported via the Standard Integration API: NorthStar, Stellar and Navica. The standard integration allows you to activate agents, update agent data, and terminate agents within the MLS System. Additionally, where applicable, you will be able to assign the security level of the agent within the MLS.

MLS - Standard Integration - Working with Offices

---

Via the standard integration you will be able to activate, update, and terminate offices within your MLS. The frequency at which updates are sent to your MLS are dependent on the MLS that you are using.

MLS - Standard Integration - Activate an Office

---

Activating an office is a two-step process. First you will assign an MLS ID to the office, then you will add the MLS Information.

1. For the desired office, click the Real Estate tab.
2. Click the icon in the MLS section.

   

3. If during initial setup you have enabled the MLS ID generator, click the Get MLS ID button. OR enter a custom MLS ID. ATTENTION: Once you select "Done", the MLS ID cannot be changed. Please ensure you have typed it in correctly before completing.
4. Click Done.
5. Click the icon in the MLS Information section.

   

6. Enable Sync with MLS.
7. Select Active from the status list. This is the only required field.
8. Enter additional MLS Information as needed.
9. Click Done.

The office record will now be sent to your MLS with no further interaction on your part. The frequency at which updates are provided is dependent on the MLS you are using.

MLS - Standard Integration - Update an Office Record

---

When 'Sync with MLS is enabled, any updates made to the data described in Standard MLS Integration - Data Sent for Offices will automatically be sent to the MLS, with no further interaction on your part.

MLS - Standard Integration - Deactivate an Office

---

1. For the desired office, click the Real Estate tab.
2. Click the icon in the MLS Information section.

   

3. Ensure that Sync with MLS is enabled.
4. Select Inactive from the status list.
5. Click Done.

The office status change will now be sent to your MLS with no further interaction on your part. The frequency at which updates are sent is dependent on the MLS you are using.

Standard MLS Integration - Data Sent for Offices

---

The table below describes the data sent to the MLS using standard integration. Not all fields may be applicable as this is dependent on the MLS you are using.

Field Name	Description	Required
Profile Tab
Name	Office Name	X
Address 1	Default Office Address Line 1	X
Address 2	Default Office Address Line 2
City	City of Default Office Address	X
State	State of Default Office Address	X
Postal Code	Zip Code of City of Default Office Address	X
Phone	Office Phone Number (Default)	X
Fax Phone number	First Office Phone Number marked as Fax
Email Address (default)	Office Email address marked as Default	X
More Info Tab
Notes	Any notes entered on the office More Info tab
Real Estate Tab
MLS Status	Active / Inactive	X
MLS ID	The MLS ID for this office
NRDS ID	The unique 9 digite NRDS ID for this office
MLS Office ID	If this is a branch, this is the MLS ID for its main office
Office Branch Type	The office branch type: · Branch · Main · Stand Alone
MLS Office Type	Choice of office type
Office Broker MLS ID	MLS ID for the office broker
Office Manager MLS ID	MLS ID for the office manager
Web Address	Office Web Address - first one marked social
MLS IDX Office Participation	Yes/No to indicate whether this office participates in IDX
Firm ID	ID used to group Offices (Applicable to NorthStar MLS – but available to all using Standard Integration).
Office Corporate License	The office Corporate License number (Applicable to Stellar MLS – but available to all using Standard Integration)

Northstar MLS

---

Northstar MLS integration uses the Standard Integration. A few notable differences:

• When selecting the Get MLS ID button (for offices) you will be asked if you would also like to get a Firm ID
• When selecting the Get MLS ID button (for offices) you are actually retrieving an MLS ID from Northstar
• Via your Northstar interface you will be able to request updated information from GrowthZone. Refer to your Northstar documentation for further information.

LockBox Integration

---

SentriLock

---

GrowthZone offers a data integration with SentriLock’s lockbox solution. The purpose of the synchronization to Sentri-lock is to activate an account for an office or agent, and define the security level afforded that office or agent. The sync happens in real time with updates appearing SentriLock in a matter of minutes. On the Real Estate tab of a contact, there is a "Sync with Lockbox" checkbox that needs to be ticked in order for the system to recognize the sync option. When enabled, GrowthZone will send updates to SentriLock whenever contact information is updated or entered new.

SentriLock - Synchronization Timing

---

Once SentriLock sync is enabled, updates are sent via API every 5 minutes.

SentriLock - Initial Integration Setup

---

The GrowthZone team will setup initial integration to SentriLock, with your input. During this process you will decide the following:

• What to use for the Lockbox Office Id Source: You will choose from NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
• What to use for the Lockbox User Name Source: You will choose from NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
• What to use for the Lockbox External Id Source: You will choose NRDS ID, MLS ID or Custom. If NRDS or MLS are selected, the system will automatically use these ID’s and prompt you if these ID’s are not set. If you select Custom, you will populate your own unique ID each time you activate an agent or office with SentriLock.
• Will you “Use Membership Status To Determine Lockbox Status”: If you choose this option, LockBox Member Status will automatically be updated, based on the status of the membership with your association. For example, if an agent has an active membership with your association, and a valid SentriLock status, when you drop that member, the SentriLock status will automatically be updated to Terminated.

SentriLock - Working with Agents

---

Data sent to SentriLock for Agents

---

The data described in the table below is synchronized to SentriLock. Each time data is sent to SentriLock, All data is sent, not just the fields that you changed.

IMPORTANT: GrowthZone data will not override any updates a user has entered directly in Sentrilock. For example, if a user changes their phone number, at any time, in Sentrilock, if a different phone number is sent from GrowthZone, the user entered phone number will NOT be over-written.

Field Name	Description	Required
Profile Tab
First Name	First name of the Agent	X
Last Name	Last name of the Agent	X
Email Address (Primary)	The email address of the Agent	X
Real Estate Tab
NRDS ID	The 9 digit unique ID  issued to all NAR members.	X
Status	The agent’s current status within the MLS or membership system. These statuses will control whether or not a user has access within the SentriLock system.	X
Card Status	This field indicates the status of the Agent’s SentriCard®.  Use to activate or  terminate the card.	X
Member Type	The Member Type indicates the level of access this user should receive to SentriLock	X
User Name	This field indicates the user name for a user to log into the SentriLock system. This field is not required, if not populated SentriLock will generate the User Name.
Password	The user's login password for SentriLock. This field is not required, if left blank, SentriLock will automatically generate a password for the agent.
External ID	The unique ID of an agent in the SentriLock system as supplied by the MLS. The exact context of this value will vary from MLS to MLS. You can enter a custom number OR during initial setup you can elect to automatically assign the Agent NRDS ID or MLS ID	X
Office ID	The office number, or unique id of the office that the agent belongs to. This is required to give them proper office access to the SentriLock system. You may enter an office ID OR, during initial setup you can elect to automatically assign the agents NRDS Office ID or MLS Office ID.	X

Activate an Agent in SentriLock

---

1. For the desired agent, click the Real Estate Tab.
2. Click the icon in the LockBox - SentriLock section.

   

3. Click Sync with LockBox.
4. Enter the LockBox Information (an asterisk denotes a required field):
   • Status*: Select Active from from the list.
   • Card Status*: Select the agent's card status. Status controls whether or not the agent has access within the SentriLock system.
   • Member Type:
   • User Name*: Enter this agent's user name to be used for access to the SentriLock software. NOTE: If, during initial setup of your SentriLock integration, you elected to use the NRDS ID or MLS ID this will be noted in the field and the field will be read only.
   • Password: This field is not required. You can enter a temporary password for your agent OR if this field is left empty, SentriLock will automatically generate a password for the agent.
5. External ID: Enter the the SentriLock ID for this agent OR if, during initial setup, you have elected to use the agent's MLS ID or NRDS ID this will be indicated, and the field will be read only.
6. NRDS Office ID: Enter the NRDS office id for this agent OR if, during initial setup, the agent's NRDS Office ID or MLS Office ID this will be indicated, and the field will be read only.
7. Click Done. The record will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

Terminate an Agent's Card Status in SentriLock

---

The agent's card status controls whether or not the agent has access within the SentriLock system. To change the card status:

1. For the desired agent, click the Real Estate Tab.
2. Click the icon in the LockBox - SentriLock section.

   

3. Click Sync with LockBox.
4. Select Terminated from the Card Status list.
5. Click Done. The updated status will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

Terminate/Suspend an Agent in SentriLock

---

1. For the desired agent, click the Real Estate Tab.
2. Click the icon in the LockBox - SentriLock section.

   

3. Click Sync with LockBox.
4. Select Terminated or Suspended from the Status list.
5. Click Done. The updated status will be automatically sent to SentriLock with no further interaction needed. All data described in Data Sent to SentriLock for Agents will be sent.

SentriLock - Working with Offices

---

Data sent to SentriLock for an Office

---

The table below describes the data that is sent to SentriLock when an office record is added or changed.

IMPORTANT: GrowthZone data will not override any updates a user has entered directly in Sentrilock. For example, if a user changes their phone number, at any time, in Sentrilock, if a different phone number is sent from GrowthZone, the user entered phone number will NOT be over-written.

Field Name	Description	Required
Profile Tab
Contact Name	The name of the Office	X
Address 1	Street address line 1	X
Address 2	Street address line 2
City	City	X
State	State or province abbreviation	X
Postal Code	Zip or postal code	X
Phone Number	The contact phone number of the user. This contact number is used to send text notifications of codes, or showing notifications if the user chooses those options. SentriLock only accepts a single phone number. GrowthZone will send the phone marked as default.	X
Real Estate Tab
Status	The office's current status within the MLS or membership system. These statuses will control whether or not members in that office have access to the SentriLock system.	X
External ID	The identifier for this office in SentriLock. Association's can use any ID they wish or, during initial setup, elect to use the Office MLS ID or NRDS ID.	X

Activate an Office in SentriLock

---

1. For the desired office, click the Real Estate tab. NOTE: The office must have a NRDS ID.
2. Click the icon in the LockBox - SentriLock section.

   

3. Click Sync with LockBox.
4. Select Valid from the Status list.
5. Enter an External ID or, the field will display NRDS ID or MLS ID if, during initial setup, you have elected to default to one of these ID's.
6. Click Done. The office record will be sent to SentriLock within five minutes, with no additional interaction on your part.

Suspend/Terminate an Office in SentriLock

---

1. For the desired office, click the Real Estate tab. NOTE: The office must have a NRDS ID.
2. Click the icon in the LockBox - SentriLock section.

   

3. Click Sync with LockBox.
4. Select Suspended or Terminated from the Status list.
5. Click Done. The updated status will be sent to SentriLock within five minutes, with no additional interaction on your part.

SentriLock - Review Event Log

---

GrowthZone provides an Event Log, that you can review to ensure there are no errors in synchronization with SentriLock. Most errors will be related to missing data or malformed data.

To view the event log:

1. Click Setup in the left hand navigation panel.
2. Click Event Log in the Miscellaneous section.
3. Apply filters to the log as desired. You can filter the log to specific dates, severity type, and log type.

Results will vary based on the log severity level:

• Verbose: Use this log severity level to view that files have been created. From this option, you will be able to view that files have been created, and have the ability to download the file by clicking the icon.

• Error: Use this option to view errors that may result in SentriLock rejecting the record. For Example: If data is missing, SentriLock will reject the record. When filtered to Error the following actions may be performed:

Click the icon to view further details of the error.

Click the icon to access the agent or office record to make the necessary changes.

Click the icon to remove the error from your list.

• Warning: Use this option to view validation checks performed by GrowthZone. Example include data that is malformed. In the example below, the address entered exceeds the number of characters allowed. The address will be sent to SentriLock, but will be truncated.

Click the icon to access the agent or office record to make the necessary changes.

Click the icon to remove the error from your list.

• Information: Selecting this log severity level will include the results for Verbose and Information, described above.

Supra

---

Supra has provided keyboxes to the real estate industry since 1955, bringing efficiency to real estate professionals and peace of mind to home sellers. By integration with GrowthZone, you are able to setup accounts for your agents/office each has to access a lock-box. In addition to activating new accounts with Supra, you will also be able to change the account, and importantly terminate accounts when needed.

Supra Synchronization Timing

---

When synchronization is enabled, files are transferred to Supra every hour.

Supra - Working with Offices

---

Through integration with Supra, you can provide Supra with status and contact information for your offices.

Data Sent to Supra for Offices

---

The table below describes the information that is sent to Supra for offices. Anytime an office is added, or changed All data is sent. Existing data in Supra will be over-written.

Field Name	Description	Data format	Required
Profile Tab
Name (Organization)	Office Name	35 Alpha	X
Address 1 (primary)	First office address line	35 Alpha
Address 2 (primary)	Second office address line	35 Alpha
City (primary)	City	31 Alpha
State (primary)	State	2 Alpha
Country (primary)	Country	4 Alpha
Zip (primary)	Zip	11 Alpha
Phone - Area Code (primary)	Area code of work number	3 Numeric
Phone (primary)	Work phone number	32 Alpha
Fax (primary)	Fax phone number	32 Alpha
Fax (primary)	Area code of fax number	3 Numeric
Email (primary)	Email	64 Alpha
Real Estate Tab
Office Id	The unique ID for this office in Supra. You can enter a custom ID, or, if during initial setup you have elected to use NRDS ID or MLS Id it will automatically be populated.	15 Alpha-numeric	X
Status	Office Status - Active, Suspended, Terminated	1 Alpha	X

Activate an Office's Supra Account

---

1. For the desired office, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. Click Sync With LockBox.
4. Select Valid from the Status list.
5. Enter the Office ID for this office, or, if during initial setup you have elected to use Office MLS ID or NRDS ID, this will be displayed and the field will be read only.
6. Click Done. The office will be activated in Supra within the hour.

Through integration, you are providing Supra with status and contact information for the office. After activating the office, follow your standard business process for issuing keys via the Supra interface.

Suspend/Terminate an Office's Supra Account

---

1. For the desired office, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. Click Sync With LockBox.
4. Select Suspended or Terminated from the Status list.
5. Click Done.

IMPORTANT: If an office’s Supra Account is Suspended/Terminated, ALL agents associated to this office will be “locked out”.

Change an Office’s Supra Record

---

Any changes made the fields described in Data Sent to Supra for Offices, will result in a change record being sent to Supra. As long as Sync to LockBox is enabled, the system will identify changes and send them to Supra, within the hour, with no further interaction on your part.

NOTE: All fields are sent to Supra, not just those that have changed. Fields in Supra will be over-written.

Disable Synchronization of an Individual Office to Supra

---

Any additions or changes to an Office's record, will automatically be synchronized to Supra. You can disable this for an individual office, if needed:

1. For the desired office, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. DeselectSync With LockBox.
4. Click Done.

NOTE: Disabling the Sync with LockBox will NOT remove the office's data from Supra, it will simply stop updates to the record from being sent from GrowthZone.

Supra - Working with Agents

---

Data Sent to Supra for Agents

---

The table below describes the data that is synchronized with Supra. Hourly, your GrowthZone system will look for additions or changes to Supra Data. If there have been any, all of the information in the table below is sent.

Field Name	Description	Data format	Required
Profile Tab
Last Name	Last name of agent	21 Alpha	X
First Name	First name of agent	17 Alpha	X
Middle	Middle initial of the agent	3 Alpha
City (primary)	City	31 Alpha	X
State (primary)	State	2 Alpha	X
Phone (primary)	Area code of & phone number of agent's phone number	23 Numeric
Address 1 (primary)	First line of agent's address line	35 Alpha
Address 2 (primary)	Second office address line	35 Alpha
Zip (primary)	Zip code of agent address	11 Alpha
Country (primary)	Country	4 Alpha
Fax Number (primary)	Area code  & Phone number of agent's fax number marked as primary	23 Alpha
Email (primary)	Email marked as primary	64 Alpha
Real Estate Tab
Lock Box Agent ID	Unique Agent ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice	15 Alpha	X
Lock Box Member Status	Agent Status – Active, Hold, Inactive	Drop-down choice	X
LockBox Listing Agent ID	Listing Agent ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice	32 Alpha	X
LockBox Office ID	Office ID During initial setup with GrowthZone you may chose this to be one of the following: Agent NRDS ID Agent MLS ID Office NRDS ID Office MLS ID Custom – an ID of your choice

Activate an Agent’s Supra Account

---

1. For the desired agent, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. Click Sync With LockBox.
4. Select Valid from the Status list.
5. Enter the agent's Office ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
6. Enter the agent's Agent ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
7. Enter the agent's Listing ID, or, if during initial setup you have elected to use the NRDS ID or MLS ID, this field will display your choice and be read only.
8. Click Done.

Files are automatically sent to Supra every hour, no further interaction is required. All data defined in Data Synchronized to Supra for Agent will be sent.

IMPORTANT: If, during initial setup, you have elected to use NRDS ID or MLS ID for Agent ID, Listing Agent ID and/or Office ID these must be populated for the agent's record. The Done button will not be enabled if these fields are not populated for the agent's record.

Change an Agent’s Supra Account Record

---

Any changes made the fields described in Data Synchronized to Supra, above, will result in a change record being sent to Supra. As long a Sync to LockBox is enabled, the system will “notice” these changes and send them within the hour, with no interaction on your part.

Terminate an Agent’s Supra Account Record

---

1. For the desired agent, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. Click Sync With LockBox.
4. Select Terminated from the Status list.
5. Click Done.

This change will automatically be included in the files sent to Supra every hour, no further interaction on your part is needed.

Suspend an Agent’s Supra Account Record

---

1. For the desired agent, click the Real Estate tab.
2. Click the icon in the LockBox - Supra section.

   

3. Click Sync With LockBox.
4. Select Suspended from the Status list.
5. Click Done.

Disable Synchronization of an Individual Agent to Supra

---

Any additions or changes to an agent's record, will automatically be synchronized to Supra. You can disable this for an individual agent, if needed:

1. On the Agent’s the Real Estate tab, deselect Sync With LockBox.

   

2. Click Save.

Deselecting this will NOT remove the contact's data from Supra, it will simply stop the updates to the record from being sent.

Supra - Review Event Log

---

GrowthZone provides an Event Log, that you can review to ensure there are no errors in synchronization with Supra. Most errors will be related to missing data or malformed data.

To view the event log:

1. Click Setup in the left hand navigation panel.
2. Click Event Log in the Miscellaneous section.
3. Apply filters to the log as desired. You can filter the log to specific dates, severity type, and log type.

Results will vary based on the log severity level:

• Verbose: Use this log severity level to view that files have been created. From this option, you will be able to view that files have been created, and have the ability to download the file by clicking the icon.

• Error: Use this option to view errors that may result in Supra rejecting the record. For Example: If data is missing, Supra will reject the record. When filtered to Error the following actions may be performed:

Click the icon to view further details of the error.

Click the icon to access the agent or office record to make the necessary changes.

Click the icon to remove the error from your list.

• Warning: Use this option to view validation checks performed by GrowthZone. Example include data that is malformed. In the example below, the address entered exceeds the number of characters allowed. The address will be sent to Supra, but will be truncated.

Click the icon to access the agent or office record to make the necessary changes.

Click the icon to remove the error from your list.

• Information: Selecting this log severity level will include the results for Verbose and Information, described above.

Did you know...: You can create a report in SupraNet to reivew your imported data. Supra highly recommends that someone in your office run reports daily. This will allow you to validate that the files are in fact being sent from GrowthZone and imported into Supra. It will also allow you to check for errors. Refer to SupraNet help documentation for further details on running and reviewing an import report.

Real Estate Edition - Special Topics

---

Real Estate Edition Training Videos

---

NRDS Integration

---

NRDS Integration: The GrowthZone integration with the National Association of REALTORS database provides association staff an easy way to manage contacts NRDS data. In this session, participants will learn the basics of how offices and agents are synced from GrowthZone to NRDS.

NAR Ecommerce

---

NAR Ecommere: GrowthZone provides integration with NAR ECommerce. Through this integration you can manage splits, store cards for easily charging member dues and manage refunds. In this session, participants will learn how to setup and manage NAR Ecommerce.

Supra Integration

---

Supra Integration: GrowthZone provides integration with the Supra Lockbox solution. Through integration this you can manage your offices and agents in one central location. In this session, participants will learn how the integration works, and how to work with offices and agents.